Hyrel System 30, Engine User Manual

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 1 of 65

3D Printer

System 30 / Engine

MANUAL

Revision 1.3

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 2 of 65

1. Introduction
All HYREL 3D machines are designed with reliability, reusability, versatility and repeatability

in mind. Whether a few parts or if you are setting up to do a light production run, they
enable you to fabricate parts quickly.

Coupled with this manual, online videos, user forums, and customer service, you can pick
up and learn how to fabricate your own parts quickly, as well as, learn how to perform
maintenance on your HYREL machine.

All HYREL 3D machines fabricate models with a multitude of materials. Not restricted to
ABS and PLA plastics, you can fabricate with Taulman Nylon 618, 645, T-Glase (a form of
PET), PlastInk’s Rubber filament, and more filaments with the HYREL Mk1 Extruder.

On the same machine platform and with the HYREL EMO-25 Extruder, you can fabricate
with Sugru, Air-Dry Clay, Plasticine, Porcelain, Play-Doh, Silicone RTV, Precious Metal Clay
(PMC), and more.

The HYREL platform provides a very open interface to control your machine to experiment
with more materials than ever possible before! As more slicing recipes for more materials
become available, we will test them and publish them publicly for all to download. We do
not restrict you from trying or using any material / filament; however, doing so may void your
warranty on your extruder(s).

HYREL 3D Machines are an innovative combination of proprietary hardware, firmware,
software, and material technology.

Congratulations! You’ve made a great choice!

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 3 of 65

1.1. How to Use This Manual
This HYREL User’s Guide is laid out in easy to follow sections which cover Set-up,

Operation, Maintenance, and Troubleshooting of your HYREL machine. Be sure to read
each section carefully so that you will get the best performance from your system.

1.1.1 Highlighted Information

The manual is written in a step-by-step format so as to guide you through a variety of
operational tasks. Information of particular importance is presented in one of three formats:

NOTE

A NOTE is used to highlight a specific point or to provide an operational tip. While
useful, a NOTE does not indicate a procedure that can cause injury or damage if it is
not followed. A NOTE will follow the paragraph of instruction to which it relates.

WARNING

A WARNING indicates a procedure that may cause Injury to an operator if the
procedure is not followed. A WARNING will precede the paragraph of instruction to
which it relates.

CAUTION

A CAUTION indicates a procedure that may cause Damage To Equipment if the
procedure is not followed. A CAUTION will precede the paragraph of instruction to
which it relates.

The HYREL machine guides you through operational tasks from a User Interface (UI) on the
front panel of the printer. Throughout the User Guide, text representing messages that
appear on the UI are presented in a specific format. Interface Messages appear as a bold,
serif, fixed-pitch (mono-space) font.

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 4 of 65

Sections Of The Manual
Overview...

Provides a quick reference for the layout of the printer and its operating components.
Overview also provides a quick reference for sources of additional information and printer
supplies.

Setup...

Guides you through the initial printer installation and setup. Topics include unpacking,
connecting power, installing software, and connecting to a computer network. Generally,
topics in setup are only required during the initial installation or relocation of the printer.

Operation...

Further develops your understanding of the printer by presenting the User Interface,
Loading and Unloading of Material, Building Parts, Removing Completed Parts, and
Removing Support Material. The tasks presented are common procedures used during the
normal operation of the printer.

Maintenance...

Lists several tasks that you will need to perform to keep your printer performing at its best.

Some tasks are ‘As Needed’ while others are determined by a set number of printer hours

Our Repetrel Software includes an “odometer” of printer hours. ‘House Cleaning’, Bearing
Maintenance, and Tip Cleaning Assembly Replacement, are procedures that you can
perform with the help of the User Guide.

Troubleshooting..

Allows you to perform some problem diagnosis and correction procedures in the event that
your printer has a problem. A Troubleshooting Checklist, Fault Determination Codes, and a
Procedure to recover from a Loss of Extrusion are provided.

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 5 of 65

1.2. Warranty / Terms of Use Information
May want to phrase this differently, and actually include some basic warranties and policies.

Warranty and Terms of Use are subject to change at any time. In any and all cases, you
(user / customer) are responsible for complying with all of the warranty & terms of use with
your HYREL Machine and components.

It is good to guide the user to the latest information online.
For the latest Warranty / Terms of Use Information, please see: www.hyrel3d.com/terms

If you have any questions about Hyrel’s Equipment Warranty Policy, please feel free to

contact us by email, where we can answer your question(s) in detail and direct you to our
web site Warranty Terms link. As always, you the Customer comes first, so if you would
like to discuss by telephone, please feel free to contact us at:

2. Overview: (This needs to be changed, see other documents)

All HYREL Machines build models, including internal features, directly from CAD .stl files.
The machines build three-dimensional parts by extruding a bead of material through a
computer-controlled extrusion head, producing high quality parts. Some of these materials
are ready to use immediately after completion, such as ABS, PLA, Nylon, etc. Other
materials require a curing time before use, such as Silicone RTV, PMC, Clay, etc.

May want to change this sentence or give more of an explaination of the process.
With the Slic3r / Skeinforge layer thickness settings, you can choose to build a part quickly
for design verification, or you can choose a finer setting for higher quality surface detail.

Maybe include something like,
The Software Engineers at Hyrel specifically developed the Repetrel 3D Printing Software

to meet a wide variety of user needs. We don’t limit the user experience to a “one size fits
all” approach. In fact, we encourage you to explore all the possibilities of the 3D Printing

Experience. We are constantly adding new “recipes” to better tailor your build based on
materials, build requirements, best practices experience. Our user community provide great
feedback on our systems and accessories, many times giving us a look at their 3D Build
Accomplishments.

(check with Hutch on these pictures)
<Insert Front Picture of Engine / System with call-outs to individual pieces of the machines>

<Insert Rear Picture of Engine / System with call-outs to individual pieces of the machines>
<Insert Left-side Picture of Engine / System with call-outs to individual pieces of the

machines>
<Insert Right-side Picture of Engine / System with call-outs to individual pieces of the

machines>

The HYREL 3D Printing System consist of six primary components:

1.) Machine (x-y-z positioning machine, with no extruder heads)

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 6 of 65

2.) Extruders (extruder printer heads which attach to the HYREL Machine)

3.) Accessories (accessories which assist with fabrication)

4.) Tool Kit (tools which assist with fabrication and maintenance)

5.) Removable Glass Build Platform (platform to which the material adheres)

6.) Repetrel (Software, preprocessing software which runs on Windows XP or better)

The HYREL Engine’s build envelope measures 200 x 200 x 200 mm (8 x 8 x 8 in).
The HYREL System’s build envelope measures 200 x 200 x 200 mm (8 x 8 x 8 in).

HYREL Extruders are currently available in two different types:

1.) Mk1 Extruder – for 1.75mm or 3mm Filaments

2.) EMO-25 – for Emulsifiable-type of materials

Up to Four (4) extruders and accessories can be attached to the main yoke of each HYREL
machine. Experimentation of multiple materials together in a single machine is now
possible. Further, multiple parts can be simultaneously built on the same machine.

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 7 of 65

Blank Page Intentional

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 8 of 65

GETTING STARTED
System 30 and Engine

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 9 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 10 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 11 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 12 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 13 of 65

Hyrel System 30M Master Pack:

 One (1) Wi-Fi Dongle
 One (1) USB A- Mini Cable
 One (1) Power Cord
 One (1) Tram Block
 One (1) Tram Block Bolt
 One (1) Spatula
 One (1) Wire Brush
 One (1) Set of Tweezers
 One (1) Set of Allen Wrenches + .050 Hex Driver
 One (1) Set of Razors
 One (1) Roll of Blue Painter’s Tape
 One (1) Roll of Material Feed Tube
 One (1) Glass Build Plate
 Two (2) Material Spool Rods
 Two (2) Thumb Screws
 Choice of: One (1) Digital Tram Gauge OR One (1) Dial Tram Gauge (as shown on page

5)

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 14 of 65

Tram Gauge Options:

 Dial Tram Gauge
 Digital Tram Gauge

You may have your choice of either Tram Gauge below.

Digital Tram

Gauge

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 15 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 16 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 17 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 18 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 19 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 20 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 21 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 22 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 23 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 24 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 25 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 26 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 27 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 28 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 29 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 30 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 31 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 32 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 33 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 34 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 35 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 36 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 37 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 38 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 39 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 40 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 41 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 42 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 43 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 44 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 45 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 46 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 47 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 48 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 49 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 50 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 51 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 52 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 53 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 54 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 55 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 56 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 57 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 58 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 59 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 60 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 61 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 62 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 63 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 64 of 65

Hyrel System 30 User Manual Hyrel LLC

Draft Hyrel Sytem 30 - Engine User Manual 7-15-16 Page 65 of 65