HyperX HX430C15FB3K2-32 User Manual

32GB (16G

)

Memory Module Specifications

HX430C15FB3K2/32

32GB (16GB 2G x 64-Bit x 2 pcs.) DDR4-3000 CL15 288-Pin DIMM Kit

B 2G x 64-Bit x 2 pcs.

SPECIFICATIONS

DESCRIPTION

HyperX HX430C15FB3K2/32 is a kit of two 2G x 64-bit (16GB)

DDR4-3000 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory

module, based on sixteen 1G x 8-bit FBGA components per module.

Each module kit supports Intel® Extreme Memory Profiles (Intel®

XMP) 2.0. Total kit capacity is 32GB. Each module has been tested

to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V.

The SPDs are programmed to JEDEC standard latency DDR4-2400

timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact

fingers. The JEDEC standard electrical and mechanical

specifications are as follows:

CL(IDD)

Row Cycle Time (tRCmin)

Refresh to Active/Refresh Command Time (tRFCmin)

Row Active Time (tRASmin)

UL Rating

Operating Temperature

Storage Temperature

17 cycles

45.75ns(min.)

350ns(min.)

32ns(min.)

94 V - 0

C to +85o C

C to +100o C

-55

FEATURES

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• On-Die termination (ODT)

• 16 internal banks; 4 groups of 4 banks each

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

FACTORY TIMING PARAMETERS

•

Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V

• XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V

• XMP Profile #2: DDR4-2666 CL15-17-17 @1.35V

kingston.com/hyperx

hyperxgaming.com

• Height 1.3425” (34.1mm), w/heatsink

Continued >>

Document No. 4809090A 08/07/19 Page 1

continued

MODULE WITH HEAT SPREADER

133.35 mm 7.2 mm

34.1 mm

MODULE DIMENSIONS

All measurements are in millimeters.

(Tolerances on all dimensions are ±0.12 unless otherwise specified)

133.35

129.55

2.10

±±0.15

3.00

Detail A

Pin 1

0.15

3.35

2.70

The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice.

28.90

Detail B Detail D Detail C

Pin 35 Pin 47

64.60

Detail E

FOR MORE INFORMATION, GO TO HYPERXGAMING.COM

All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers

the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.

faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.

HyperX is a division of Kingston.

Pin 105 Pin 117

56.10

22.95

31.25

11.00

8.00

17.60

14.60

Document No. 4809090A Page 2

hyperxgaming.com