hyperx HX426C15PB3-32 User Manual

32G
t
Memory Module Specifications
HX426C15PB3/32
HX426C15PB3/32
32GB 4G x 64-Bit
B 4G x 64-Bi
DDR4-2666 CL15 288-Pin DIMM
SPECIFICATIONS
DESCRIPTION
HyperX HX426C15PB3/32 is a 4G x 64-bit (32GB) DDR4-2666
on sixteen 2G x 8-bit FBGA components per module. Each module
kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-2666 at a low latency timing
of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V - 0
0
-55
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
o
C to +85o C
o
C to +100o C
hyperxgaming.com
XMP TIMING PARAMETERS
Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
XMP Profile #1: DDR4-2666 CL15-17-17 @1.35V
XMP Profile #2: DDR4-2400 CL14-16-16 @1.35V
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661” (42.20mm)
Continued >>
Document No. 4809412A 04/14/20 Page 1
continued
·
continued HyperX
MODULE WITH HEAT SPREADER
8.3
42.2
133.35
MODULE DIMENSIONS
All measurements are in millimeters.
(Tolerances on all dimensions are ±0.12 unless otherwise specified)
133.35
129.55
2.10
··0.15
3.00
Detail A
Pin 1
0.15
3.35
2.70
The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice.
28.90
Detail B Detail D Detail C
Pin 35 Pin 47
64.60
Detail E
Pin 105 Pin 117
56.10
22.95
31.25
11.00
8.00
17.60
14.60
FOR MORE INFORMATION, GO TO WWW.HYPERXGAMING.COM
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.
HyperX is a division of Kingston.
©2020 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
Document No. 4809412A Page 2
hyperxgaming.com
Loading...