HYPERWEAR SandBell Quick Start Manual
!
continued on reverse
SAFETY
• Consult your doctor before beginning any exercise program
•
Use this product at your own risk
• Inspect SandBell prior to each use & do not use if you see any damage
• Start gradually & stop exercising if you feel dizzy or sudden shortness of breath
WARRANTY
SandBell®
Care and Safety Guide
© 2016 Hyper Wear Inc. All Rights Reserved. Hyperwear® and SandBell® are registered trademarks of Hyper Wear Inc.
CARE
•
Wipe down SandBell with damp cloth to clean
•
Store in a cool, dry place and allow to dry out fully if it gets wet
•
Spray with Febreze to quickly remove odors and kills most germs
•
Make sure fill tube is fully inserted into interior to avoid damage or leaks
• DO NOT DRAG, DROP or STRIKE on hard or abrasive surfaces
We warrant this product to be free from defects in materials or workmanship under
normal use for year from dare of purchase. Your exclusive remedy under this
warranty is that we will repair or replace without charge if you return us, shipping
prepaid, after contacting us to receive a return authorisation number and
instructions. This warranty does not apply to any item we determine has been
subjected to abuse, alteration, misuse or neglect. To initiate a return or warranty visit
www.hyperwear.com/warranty. ALL OTHER WARRANTIES, GUARANTEES OR
REMEDIES ARE EXCLUDED INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
US Patent 8,622,877 B2 other patents pending
CALIFORNIA PROPOSITION 65 WARNING
This product contains chemicals known to the State of California to cause cancer and/or birth defects or other
reproductive harm. For questions about Prop 65 visit http://oehha.ca.gov/prop65.html.
continued on reverse
FILLING INSTRUCTIONS
•
If purchased empty there will be a sticker with filling instructions on one side"
•
A rubber band for closing is located under the sticker"
•
To fill you will need dry, washed “All-Purpose” sand, a small funnel and weight scale "
•
Insert the funnel fully into the fill nozzle and place SandBell on weight scale "
•
Pour in dry sand, shaking SandBell occasionally to allow sand to fill SandBell"
•
Fill to weight indicated on SandBell"
•
Fold fill nozzle in half and tightly wrap rubber band one inch from tip"
•
Insert closed nozzle into SandBell and push off to one side
SandBell®
User Guide
USE
•
Inspect SandBell prior to each use & do not use if you see any damage"
•
Avoid using on any surfaces where a puncture or cut may occur"
•
Do not expose to sharp or pointed objects & avoid striking SandBell with other objects"
•
To grip, grab a handful of sand and neoprene. DO NOT grip by the outer vinyl trim
alone
CONTACT
EMAIL: customerservice@hyperwear.com"
CALL : 1-888-460-0628
RESOURCES
•
Instructional Videos : https://www.youtube.com/hyperwear"
•
Workouts & Articles: https://www.hyperwear.com/blog/"
•
Grip Instructions : https://vimeo.com/album/3695065"
•
Additional Products : https://www.hyperwear.com/shop.html"
© 2016 Hyper Wear Inc. All Rights Reserved. Hyperwear® and SandBell® are registered trademarks of Hyper Wear Inc.
Loading...