Mark with Oxyfuel Powder and Cut with XPR
with Legacy Part Programs –
®
EDGE
Connect CNC
Application Note
811230 | Revision 0 | August 2020
Hypertherm Europe B.V.
Vaartveld 9, 4704 SE
Roosendaal, Nederland
31 165 596907 Tel
31 165 596901 Fax
31 165 596908 Tel (Marketing)
31 (0) 165 596900 Tel (Technical Service)
00 800 4973 7843 Tel (Technical Service)
technicalservice.emea@hypertherm.com
(Technical Service Email)
Hypertherm (Shanghai) Trading Co., Ltd.
B301, 495 ShangZhong Road
Shanghai, 200231
PR China
86-21-80231122 Tel
86-21-80231120 Fax
86-21-80231128 Tel (Technical Service)
techsupport.china@hypertherm.com
(Technical Service Email)
South America & Central America: Hypertherm Brasil Ltda.
Rua Bras Cubas, 231 – Jardim Maia
Guarulhos, SP – Brasil
CEP 07115-030
55 11 2409 2636 Tel
tecnico.sa@hypertherm.com (Technical Service Email)
Hypertherm Korea Branch
#3904. APEC-ro 17. Heaundae-gu. Busan.
Korea 48060
82 (0)51 747 0358 Tel
82 (0)51 701 0358 Fax
Marketing.korea@hypertherm.com (Marketing Email)
TechSupportAPAC@hypertherm.com
(Technical Service Email)
Hypertherm Pty Limited
GPO Box 4836
Sydney NSW 2001, Australia
61 (0) 437 606 995 Tel
61 7 3219 9010 Fax
au.sales@Hypertherm.com (Main Office Email)
TechSupportAPAC@hypertherm.com
(Technical Service Email)
Hypertherm (India) Thermal Cutting Pvt. Ltd
A-18 / B-1 Extension,
Mohan Co-Operative Industrial Estate,
Mathura Road, New Delhi 110044, India
91-11-40521201/ 2/ 3 Tel
91-11 40521204 Fax
HTIndia.info@hypertherm.com (Main Office Email)
TechSupportAPAC@hypertherm.com
(Technical Service Email)
Hypertherm, Inc.
Etna Road, P.O. Box 5010
Hanover, NH 03755 USA
603-643-3441 Tel (Main Office)
603-643-5352 Fax (All Departments)
info@hypertherm.com (Main Office Email)
800-643-9878 Tel (Technical Service)
technical.service@hypertherm.com (Technical Service Email)
800-737-2978 Tel (Customer Service)
customer.service@hypertherm.com (Customer Service Email)
866-643-7711 Tel (Return Materials Authorization)
877-371-2876 Fax (Return Materials Authorization)
return.materials@hypertherm.com (RMA email)
Hypertherm México, S.A. de C.V.
Avenida Toluca No. 444, Anexo 1,
Colonia Olivar de los Padres
Delegación Álvaro Obregón
México, D.F. C.P. 01780
52 55 5681 8109 Tel
52 55 5683 2127 Fax
Soporte.Tecnico@hypertherm.com (Technical Service Email)
Hypertherm Plasmatechnik GmbH
Sophie-Scholl-Platz 5
63452 Hanau
Germany
00 800 33 24 97 37 Tel
00 800 49 73 73 29 Fax
31 (0) 165 596900 Tel (Technical Service)
00 800 4973 7843 Tel (Technical Service)
technicalservice.emea@hypertherm.com (Technical Service Email)
Hypertherm (Singapore) Pte Ltd.
82 Genting Lane
Media Centre
Annexe Block #A01-01
Singapore 349567, Republic of Singapore
65 6841 2489 Tel
65 6841 2490 Fax
Marketing.asia@hypertherm.com (Marketing Email)
TechSupportAPAC@hypertherm.com (Technical Service Email)
Hypertherm Japan Ltd.
Level 9, Edobori Center Building
2-1-1 Edobori, Nishi-ku
Osaka 550-0002 Japan
81 6 6225 1183 Tel
81 6 6225 1184 Fax
HTJapan.info@hypertherm.com (Main Office Email)
TechSupportAPAC@hypertherm.com (Technical Service Email)
© 2020 Hypertherm, Inc. All rights reserved.
EDGE, Phoenix, XPR, and Hypertherm are trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. EtherCAT
is a trademark of Beckhoff Automation. All other trademarks are the property of their respective holders.
Environmental stewardship is one of Hypertherm’s core values.www.hypertherm.com/environment
100% Associate-owned
Mark with Oxyfuel Powder and Cut with XPR with Legacy Part Programs
Introduction
Although legacy part programs should be reposted with CAM software, there is a manual way to
use a legacy part program to mark M09 codes with oxyfuel powder and cut M07 codes with XPR.
Follow the guidelines and special sequence of steps below.
Guidelines
Control the CNC in Manual mode.
Use the Move to Pierce function to complete all oxyfuel powder marking first.
It is not possible to switch from Plasma mode to Oxyfuel mode.
Mark with oxyfuel powder and cut with XPR
To use a legacy part program to mark with oxyfuel powder and cut with XPR:
1. In Phoenix, with the part program in Oxyfuel mode, press Start and then immediately press
Stop to pause the program.
2. Choose Move to Pierce and select the first M09 code pierce point for oxyfuel powder marking.
3. Choose Start to begin oxyfuel powder marking.
4. As soon as all M09 marking codes are complete, immediately choose Stop to pause the part
program.
If you wait too long to pause the program, then the plasma cutting M07
codes are cut with in Oxyfuel mode instead of in Plasma mode.
5. On the Main screen, choose Change Cut Mode and then choose Plasma.
6. Choose the Move to Pierce soft key to skip to the first M07 pierce in the part program.
7. Choose Start to resume plasma cutting with XPR.
EDGE Connect Application Note 811230 3
Loading...