Hyline Offroad TJ-YJ WINCH MOUNT User Manual

Proudly Made In USA

Parts List

Tools Needed

Qty:

1 Winch Mount
2 Flat Spacers

Installation Instructions:

TJ/YJ Winch Mount
Part Number: TJ-YJ-10WM

Safety GlassesRatchet

T-55 Torx Bit

3/8” Socket

13 mm Socket

Vehicle Fitment:

1987 – 2006 Jeep Wrangler and
Wrangler Unlimited

Congratulations on your purchase of the Hyline Offroad Winch Mount. All of our products are completely
manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad enthusiasts just
like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your recent purchase
and look forward to serving you in the future.

Optional Winch Installation

Hyline Offroad Staff

T:\Hyline Offroad, LLC\Installation Instructions\TJ-YJ-10WM\TJ-YJ-10WM Installation Instructions.doc Page 1 of 2

REV 0 12/2/08

Winch Mount Installation

PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION

Step 1 – Install fairlead and winch to Hyline Offroad winch mount first before installing onto the vehicle.

Step 2 – Unbolt the four (4) Torx/Hex Bolts from the top of the front bumper. You DO NOT need to completely

remove the bumper.

Step 3 – Remove plastic factory sway bar cover by unbolting four (4) 3/8” bolts, (2) from each side of cover. Do

Not Throw This Cover Away.

Step 4 – Remove the two (2) closest sway bar bracket bolts.

Step 5 – Install the Winch Mount by aligning the clearance holes in the winch mount with the holes in the bumper

and the sway bar mount holes. Slide the Flat Spacers in between the Winch Mount and the sway bar
mount. These spacers will keep the Winch Mount level with the stock bumper.

Step 6 – Reinstall all bolts (and tow hooks if applicable) that were taken out previously and torque to proper

Manufacturer settings.

Attention

in the vehicle. WEAR SEAT BELTS AT ALL TIMES WHEN DRIVING!

Though our products are rugged, they are primarily designed and built to enhance the appearance of the
vehicle and will not protect from death or injury in the event of an accident. Adhere to all vehicle
manufacturers specifications

T:\Hyline Offroad, LLC\Installation Instructions\TJ-YJ-10WM\TJ-YJ-10WM Installation Instructions.doc Page 2 of 2

Installation instructions provided must be read and followed exactly when installing

product. Failure to do so could potentially result in injury or death of any occupants

REV 0 12/2/08