Hyline Offroad JK LED LIGHT BAR MOUNT User Manual
Proudly Made In
USA
Qty:
1 Driver Side Bracket
1 Passenger Side Bracket
2 Rubber Liners
Congratulations on your purchase of the Hyline Offroad 50” Light Bar Mount. All of our products are
completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by
Offroad enthusiasts just like you to be rock solid at an affordable price. Hyline Offroad would like to
thank you for your recent purchase and look forward to serving you in the future.
Hyline Offroad Staff
Should you find any product damaged, missing or have any questions before, during or after
installation please call Hyline Offroad directly. Do not call the place of purchase. Please call us
at 888-495-4631 or email at techsupport@hylineoffroad.com
Installation Instructions:
JK 50” Light Bar Mount
Part Number: 400.600.100
Ratchet
T40 Torx
Socket
Vehicle Fitment:
2007-Present Jeep Wranglers
(2 Door & Unlimited)
Q:\Hyline Offroad, LLC\Installation Instructions\400.600.100 JK 50'' LIGHT BAR MOUNT\400.600.100 Installation Instructions.doc
REV 1 9/7/2013
Page 1 of 2
Light Bar Mount Installation
PLEASE READ INSTRUC
TIONS BEFORE BEGINNING INSTALLATION
Installation instructions provided must be read and followed exactly when installing
Step 1 – Using Torx Socket remove the 6 bolts in each windshield pillar. You will reuse the
original hardware so don’t throw them away.
Step 2 – Install both brackets with one rubber liner behind each to protect the vehicle’s painted
surface and reinstall original hardware. DO NOT TIGHTEN.
Step 3 – Now install you 50” Light Bar between both brackets. With mounting bracket hardware
still loose you can run the light wiring behind the brackets. This is only one option for
running wires. It is your decision to run wiring in any other way.
Step 4 – After wiring is run you can tighten the torx bolts and light bar hardware appropriately.
Send your OFFROAD pictures to
pics@HylineOffroad.com . If we choose any one
of your pictures to be used on our website, We send you a FREE Hyline Offroad
T-Shirt.
product. Failure to do so could potentially result in injury or death of any occupants
in the vehicle. WEAR SEAT BELTS AT ALL TIMES WHEN DRIVING!
Though our products are rugged, they are primarily designed and built to enhance the appearance of the
vehicle and will not protect from death or injury in the event of an accident. Adhere to all vehicle
manufacturers specifications
Q:\Hyline Offroad, LLC\Installation Instructions\400.600.100 JK 50'' LIGHT BAR MOUNT\400.600.100 Installation Instructions.doc
REV 1 9/7/2013
Page 2 of 2
Loading...