Page 1
CP-291 PC/HD to
PC/HD Scaler Box
Operation Manual
CP-291
Page 2
1. Introduction................................................................................
2. Features.......................................................................................
3. Operation Controls and Functions..........................................
3.1 Front Panel...........................................................................
3.2 Rear Panel............................................................................
4. OSD Operation...........................................................................
5. Connection and Installation.....................................................
6. Specifications.............................................................................
7. Supports Resolution.....................................................................
TABLE OF CONTENTS
1
1
1
2
2
3
4
4
4
Page 3
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features
Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.
Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
Supports YPbPr/RGBHV input/output.
1
Page 4
1 2 3 4
DC 5V
PC / HD
OUTPUT
MENU
+
-
PC / HD PC / HD
3.2 Rear Panel
2
3.1 Front Panel
1 2
PC / HD
BYPASS
PC / HD
IN
3. Operation Controls and Functions
① PC/HD Bypass: Bypass the PC/HD input signal.
② Input: Connect the PC input D-Sub (15-pin) port to the D-Sub output port
of your source equipment such like PC.
①
Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
②
PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
③
Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
④
+/- Button:
1. On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2. Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Outside of the OSD menu, press [-] button to active the Auto
Adjust function. The screen will show Auto Adjust.
Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and then [ + ] to switch to XGA mode.
Page 5
4. OSD Operation
3
Adjustment
CONTRAST - 0 ~ 100 of Contrast Level
BRIGHTNESS
-
0 ~ 100 of Brightness Level
- HUE 0 ~ 100 of Hue Level
- SATURATION 0 ~ 100 of Saturation Level
- SHARPNESS 0 ~ 100 of Sharpness Level
FINETUNE
- EXIT
- RED
0 ~ 100 of Red Color Level
- GREEN
0 ~ 100 of Green Color Level
- BLUE
0 ~ 100 of Blue Color Level
COLOR
- EXIT
SIZE
-
OUTPUT
-
- HPOSITION 0 ~ 100 of OSD Horizontal Position
- VPOSITION 0 ~ 100 of OSD Vertical Position
- TIMER 0 ~ 100 of OSD Existing Time (sec.)
- BACKGROUND 0 ~ 100 of OSD Transparent Level
OSD
- EXIT
INFORMATION
-
Mirror
FULL / OVERSCAN / UNDERSCAN /
LETTERBOX / PANSCAN
1
st
Tier Option 2
nd
Tier Option
Back to 1
st
Tier
Back
to
1
st
Tier
Back to 1
st
Tier
Back
to
1
st
Tier
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
NATIVE / VGA / SVGA / XGA /
SXGA /UXGA / WXGA / WSXGA /
WUXGA / 480i / 480p /720p@60Hz
/ 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz
EXIT
-
Close OSD Menu
ON/OFF
Note: Finetune function works differently under component and
VGA input therefore, Hue, Saturation and Sharpness are only
adjustable when input signal is component.
- PHASE (PC)
0 ~ 100 of Phase Level
- CLOCK (PC)
0 ~ 100 of Clock Level
- H-POSITION (PC)
0 ~ 100 of H-Position Level
- V-POSITION (PC)
0 ~ 100 of V-Position Level
- EXIT (PC)
Page 6
5. Connection and Installation
4
PC MONITOR
DVD
LCD TV
or
or
6. Specifications
Input Port
Output Port
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
Power Consumption
1 x PC
1 x PC
5V/2.6A DC (US/EU standards, CE/FCC/UL certified)
157(D) x 102(W) x 25(H)
332
Aluminum
Silver
0°C ~ 40°C
10W (max)
7. Supports Resolution
480I/576I (NTSC/PAL)
480P/576P
720P@(50/60)
1080I@(50/60)
1080P@(50/60)
VGA@(60/72/75/85)
SVGA@(56/60/72/75/85)
XGA@(60/70/75/85)
SXGA@(60/75/85)
UXGA@60
WXGA@60(1280x800)
WSXGA@60(1680x1050)
WUXGA@60(1920x1200)
PC INPUTInput/Output
Resolution
PC OUTPUT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V@60
V@60
V@60
V@60
V
V
V
V
PC/HD PC/HD
Note: 1920 x 1200 = Reduced Blanking WUXGA
Page 7
Page 8
20080708 MPM-CP291Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Loading...