HY-LINE CLUX-42E Operation Manual

CLUX-42E

CLUX-42E

4x2 HDMI v1.3

Distributor with Switcher

Operation Manual

TABLE OF CONTENTS

1

1

2

2

3

4

4

5

5

1. Introduction................................................................................

2. Features......................................................................................

3. Operation Controls and Functions..........................................

3.1 Front Panel...........................................................................

3.2 Rear Panel............................................................................

3.3 Remote Control………………………...……………………...

3.4 RS-232 Control Protocol…………………………………...….

3.5 RS-232 command…………………………………...…….…..

4. Specifications............................................................................

1. Introduction

This is a high performance HDMI v1.3 Distributor with Switcher. It allows your
various HDMI source to share two HDTV display. Simply press one button to
select your desired HDMI source to display on the HDTV.
Each product in this series is compatible to HDMI v1.3 specifications, a
cutting-age technology which defines to transfer Deep Color (10-bit and 12-bit)
video and new lossless compressed (LPCM 7.1CH, Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to
225MHz (6.75Gbps). It also does signal amplification and equalization, so as to
provide high performance I/O of audio and video.

2. Features

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
 Deep color video up to 12bit, 1080p@ (24/60) Hz.
 Four HDMI sources to connect up to two HDMI displays simultaneously.
 Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate).

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA and

480i to 1080p.

 Supports signal amplification and equalization before transmitting.
 HDMI cable distance test with 1080p/8bits resolution the, Input/Output

source can run up to 20/15 meters. If 1080p/12bits the Input/Output source
can run up to 20/15 meters.

 Supports EDID functionality. The unit will detect the first HDMI/DVI output

source’s EDID and record in the unit. If the first detected output source is
empty it will pass to next source, until the first HDMI/DVI been detected.
When user reconnected ALL the output sources or re-plug the power, the
system will automatically recover the EDID.

 Support xvYCC.
 Support CEC bypass.

1