Page 1
Hygena Bar Table
Assembly Instructions - Please keep for future reference
600/6194
Dimensions
Dia - 72cm
Height - 90cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Help line: 0845 6400800
Issue 1 - 02/04/11
Page 2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
Care and maintenance
• Only clean using a dry cloth,
do not use bleach or abrasive
cleaners.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibl
• This product should not be
discarded
Take to your local authority
waste disposal centre.
with household waste.
y.
,
1
Page 3
If you have damaged or missing components,
Components - Panels
call the Customer Helpline:
Please check you have all the panels listed below
underside
0845 6400800
1
Table top
4
Connecting part x 1
(6.5 x 6.5cm)
(dia70cm)
Leg frame x 1
2
(88.2 x 72cm)
Components - Fittings
Please check you have all the fittings listed below
Leg frame x 2
3
(88.2 x 35cm)
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
34mm Bolt x 8
D
Hex key x 1
B
16mm Bolt x 4
C
Plain washer x 8
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
2
Page 4
Assembly Instructions
Step 1
Assemble leg frame
Place table top
1
upside down on a clean,
Assemble leg frame
3
and to the table top
1
using bolts and
plain washers
C
2
A
Note: Do not fully
tighten bolts.
3
A
3
C
2
1
Step 2
Assemble connecting
part
Connect leg frame
3
and with connecting
part using bolts
4
Note: Re-tighten all the
bolts.
Assembly is complete.
2
B
3
B
B
3
4
2
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Page 5
Hygena Bar Chair
Assembly Instructions
- Please keep for future reference
600/6194
Dimensions
Width - 49.6cm
Depth - 35cm
Height - 66.3cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800
Issue 1 - 02/04/10
Page 6
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• This product is for domestic
use only .
Care and maintenance
• Only clean using a dry cloth,
do not use bleach or abrasive
cleaners.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble on a soft level
surface to avoid damaging the
• Make time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibl
• Maximum safe weight of user:
110kgs.
• This product should not be
discarded
Take to your local authority
waste disposal centre.
with household waste.
y.
,
1
Page 7
If you have damaged or missing components,
Components - Panels
call the Customer Helpline:
Please check you have all the panels listed below
The quantities below are for 4 chairs
0845 6400800
Seat pad x 4
1
(47.5 x 33.2cm)
Chair frame x 4
2
(61.5 x 49.6cm)
3
(44 x 9.3cm)
4 x rab gnitcennoC
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly for 4 chairs. In some c ases
A
32mm Bolt x 8
Tools required
B
32mm Screw x 12
C
Hex key x 1
(supplied in the fittings pack of table)
Phillips screwdriver
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
105
110 115 120 125 130 135 140 145 150 155 160 165 170
2
Page 8
Assembly Instructions
Step 1
Assemble chair frame
Attach connecting bar
to chair frame using
A
bolts
Note: Do not fully
tighten bolts.
22
23
A
23
22
A
A
Step 2
Assemble seat pad
Place seat pad
upside down on a clean,
Carefully position the
chair frame on the seat
pad and secure using
screws .
B
Note: Re-tighten all the
bolts.
Assembly is complete.
1
B
B
B
B
21
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800
Loading...