Hollywood TV Bed Frame
Step 7
Assembly Instructions
- Please keep for future reference
656/5075
656/5082
656/8560
656/8577
656/8553
656/8584
656/5099
5cm Max. TV Depth
32inch TV Max.
Dimensions
Width x Depth x Height
228cm x 147cm x 76/102cm (Double)
238cm x 160cm x 76/102cm (King)
236cm x 192cm x 76/102cm (Super King)
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01992 450333
Issue 1 - 30/04/10
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Assembly requires 2 people.
• Do not fully tighten bolts until
the whole bed is assembled.
Do not overtighten the nuts to
avoid causing damage to the
threads.
• From time to time check that
there are no loose bolts or
screws on this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting bolts
and screws, as this could damage
the unit. Only use hand screwdrivers
and Allen keys.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Components
Please check you have all the parts listed below
Headboard end
1 Right side rail
Headboard end
2 Left side rail
If you have damaged or missing components,
call the Customer Helpline: 01992 450333
3 Headboard
5 Central support rail
7
Slats
x 26 (Double)
x 28 (King & S-King)
4 Footboard
8 End slat caps
x 26 (Double)
x 28 (King & S-King)
6 Centre Rail Feet x 2
Central slat caps
9
x 13 (Double)
x 14 (King & S-King)
2
Components and Fittings
Please check you have all the parts listed below
10 DVD Tray 12 Cable Tidy
11 DVD Tray Feet x 2
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
18mm M8 Bolt x 8
D
20mm M8 Bolt x 6
G
B
L-Shaped Bracket x 2 Flat washer (M8) x 12
E
Central Support Bracket x 2
H
C
F
45mm M8 Bolt x 2
30mm M8 Bolt x 4
12mm M6 Bolt x 4
Tools required
Allen key x 1
(supplied)
Phillips Screwdriver
(not supplied)
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
Spanner x 1
(not supplied)
3