Hygena 656-5738 Instruction manual

MADE IN

BRITAIN

Dimensions

Width - 60cm

Depth - 34cm

Height - 72cm

Valencia - 600mm Wall Cabinet

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 4 - 17/08/15

Important - Please read these instructions fully before starting assembly

hygena

656/5738

633/2899

633/2727

203/9309

633/2813

204/8637

Cabinet

Black Door Pack

Cream Door Pack

Oak Door Pack

White Gloss Door Pack

White HN Door Pack

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 11kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the brackets supplied.

• Dispose of all packaging carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Loose Shelf (DPF095A)

(568 x 236mm)

Top/Base Panel (DPF094A)

(569 x 319 mm) x 2

Back Panel (DPF096A)

(579 x 694 mm)

Valencia Door (DPF148B)

(597 x 716mm)

The front surface

of this door is

protected with a

peel-off film

End Panel (DPF141B)

(320 x 716 mm) x 2

Please check you have all the fittings listed below

Tools required

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Wooden dowel (F22) x 8

Metal dowel (F901) x 8

Large locking nut (F900) x 8

G H

Rule Scissors Hammer

Eye protection (when using a hammer or drill)

Cross-head screwdriver

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Electric drill (only use when drilling into walls)

13mm Screw (F63) x 4

19mm Connecting bolt (F461) x 2

25mm Screw (F50) x 4

Connecting Sleeve (F432) x 2

Shelf support (F110) x 4

NNa

25mm Screw (F132) x 2

Handle (F214) x 1

Hinge Plate (F574) x 2

Hinge (F316) x 2

Soft Close (F320) x 1

Wall bracket (F198) x 2

Hanging bracket

(F181) x 2

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Step 1

Choose which way you would like the door to open

You can fit the door to the left side or right side.

If you would like

your door to

open this way,

fit the hinge

plates to the left

end panel

If you would like

your door to

open this way,

fit the hinge

plates to the

right end panel

Step 2

Prepare the left end panel

Refer to step 1 and, if required, fit 2 hinge

plates onto the left end panel , orientated as shown.

Screw 4 metal dowels into the holes shown on the left end panel .

Note: Tighten metal dowels up fully against the panels.

Fit a hanging bracket to the left side using 2 screws , making sure that the hook is towards the back edge.

This will be the

left end panel

+ 11 hidden pages