Hygena 608-2527, 608-2541, 194-9153, 205-3158, 608-2534 Instruction manual

...

MADE IN

BRITAIN

Base - Black Décor End

Base - Cream Décor End

Base - Oak Décor End

Base - White HN Décor End

Base - White Décor End

Tall - Black Décor End

Tall - Cream Décor End

Tall - Oak Décor End

Tall - White HN Décor End

Tall - White Décor End

Wall - Black Décor End

Wall - Cream Décor End

Wall - Oak Décor End

Wall - White HN Décor End

Wall - White Décor End

Valencia - Décor End Panels

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 25/04/14

Important - Please read these instructions fully before starting assembly

hygena

608/2527

608/2541

194/9153

205/3158

608/2534

608/2668

608/2682

205/4755

204/9337

608/2675

608/2596

608/2613

205/4119

205/4999

608/2606

Base

Décor

End

Wall

Décor

End

Tall

Décor

End

Please check you have all the fittings listed below

Tools required

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below, the kitchen range name and the panel name.

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Cross-head screwdriver

6 screws for Tall Décor End

4 screws for Wall/Base Décor End

Tall Décor End

(2130 x 580mm)

Base Décor End

(870 x 580mm)

Wall Décor End

(720 x 340mm)

x 6

Assembly Instructions

Step 1

Line your décor end panel up with the side of your unit.

Ensure the top and rear of your décor end panel are flush with the unit.

Hold the décor end panel securely in place while you attach it using screws through any of the unused holes in your units side panel.

Note: If you have a tall décor end panel you will have 6 screws to fit, if you have a wall or base décor end panel you will have 4 screws .

x 4

Note: You may fit your décor end panel to either side of your unit. Please wait until your units are assembled and in place before fitting your décor end panels.

ALR2665

25mm Screw (F50)