Page 1
Important - Please read these instructions fully before starting assembly
Dimensions
Vespa Dining Chairs
Assembly Instructions - Please keep for future reference
603/6717
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Width - 42.5cm
Depth - 53cm
Height - 86cm
Issue 1 - 14/12/12
hygena
Page 2
Important - Please read these instructions fully before starting assembly
Safety and Care Advice
!
Cleaning Guidance
1
Care and maintenance
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Minor stains and spillages
should be removed immediately
from cushion fabric, by wiping
over lightly with a damp cloth
and mild soapy water.
• Light marking can also be
removed using this method.
• To remove more stubborn
stains or marking, a good
quality proprietary domestic
fabric cleaner can be used,
although it should first be tested
on and inconspicuous area of
the fabric.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Make sure you have enough
space to layout the parts before
starting.
• Dispose of all packaging
carefully and responsibly.
• Keep these instructions for
further use.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Page 3
Please check you have all the parts listed below
Components - Parts
2
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
1
Seat frame x 4
2
Back rest x 4
Page 4
Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0
5
10 15 20 25 30 35 40
45
50
55
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
A
13mm Allen screw x 16
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
B
Spring washer x 16
C
Allen key x 1
Page 5
Assembly Instructions
4
Step 1
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Assembly is complete.
1
2
1
2
A
A
A
B
A
C
Attaching seat pad
Lay back rest flat on
to the floor.
Note: Ensure the fixing
brackets are facing
upwards as shown.
2
Step 2
Attaching seat pad
Locate seat frame into
position and secure using
fixings and .
Stand the Chair upright.
Repeat for all 4 chairs.
A
B
A
A
1
2
A
A
A
B
Page 6
Important - Please read these instructions fully before starting assembly
Issue 1 - 10/12/12
Vespa Dining Table
Assembly Instructions - Please keep for future reference
603/6724
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Width - 90cm
Depth - 150cm
Height - 75cm
Dimensions
hygena
Page 7
• This product complies with
BS EN 12521: 2009.
• Imported by:
Home Retail Group.
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes.
MK9 2NW
• Product Cat no.:603/6724(D)
• P/O No:
• If the glass is chipped or broken, stop using the product and
consult the Manufacturer or Supplier.
Warnings
a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats
are used to prevent such items from coming into contact with the glass.
b) Do not sit or stand upon the glass surface(s).
c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if
necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Glass safety
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
1
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put excessive
weight on the product, this
could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging
carefully and responsibly.
• Place the product on flat and
steady surface during use.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Keep these instructions for
further use.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Page 8
Please check you have all the parts listed below
Components - Parts
1
Glass top (150 x 90cm)
2
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
2
Leg x 4 (Ø5.1 x 73.8cm)
Underside
Page 9
Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0
5
10 15 20 25 30 35 40
45
50
55
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
A
40mm Threaded stud x 4
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
B
Nut x 4
C
Spanner x 1
Page 10
Assembly Instructions
4
Step 1
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Assembly is complete.
Attaching legs
1
Warning:
Carefully p
lace
glass top
upside down onto a clean
flat surface.
a: Screw nuts onto
the end of short threaded
studs .
b: Screw short threaded
studs into the metal
discs on the underside of
glass top .
Use spanner to fully
tighten nuts down onto
the metal discs.
c: Screw legs onto
the threaded studs and
tighten.
Note: Take care not to
overtighten.
With help, carefully turn
the table upright
.
Warning:
The table is
heavy. Lift
with care.
B
A
A
C
B
2
1
A
a:
b:
A
B
C
1
1
2
1
2
Loading...