Hygena 603-6724 Instruction manual

Important - Please read these instructions fully before starting assembly

Issue 1 - 10/12/12

Vespa Dining Table

Assembly Instructions - Please keep for future reference

603/6724

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Width - 90cm

Depth - 150cm

Height - 75cm

Dimensions

hygena

• This product complies with BS EN 12521: 2009.

• Imported by: Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW

• Product Cat no.:603/6724(D)

• P/O No:

• If the glass is chipped or broken, stop using the product and consult the Manufacturer or Supplier.

Warnings

a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats are used to prevent such items from coming into contact with the glass.

b) Do not sit or stand upon the glass surface(s).

c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.

d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary, do not use washing powders or any other substance containing abrasives since these substances scratch glass.

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

Glass safety

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

• Check you have all the components and tools listed on

pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before starting.

• Do not stand or put excessive weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Parts of the assembly will be easier with 2 people.

• Dispose of all packaging carefully and responsibly.

• Place the product on flat and steady surface during use.

• Assemble on a soft level surface to avoid damaging the unit or your floor.

• Keep these instructions for further use.

• To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.

+ 3 hidden pages