Page 1
Important - Please read these instructions fully before starting assembly
Dimensions
Vespa Dining Chairs
Assembly Instructions - Please keep for future reference
603/6717
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Width - 42.5cm
Depth - 53cm
Height - 86cm
Issue 1 - 14/12/12
hygena
Page 2
Important - Please read these instructions fully before starting assembly
Safety and Care Advice
!
Cleaning Guidance
1
Care and maintenance
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Minor stains and spillages
should be removed immediately
from cushion fabric, by wiping
over lightly with a damp cloth
and mild soapy water.
• Light marking can also be
removed using this method.
• To remove more stubborn
stains or marking, a good
quality proprietary domestic
fabric cleaner can be used,
although it should first be tested
on and inconspicuous area of
the fabric.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Make sure you have enough
space to layout the parts before
starting.
• Dispose of all packaging
carefully and responsibly.
• Keep these instructions for
further use.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Page 3
Please check you have all the parts listed below
Components - Parts
2
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
1
Seat frame x 4
2
Back rest x 4
Page 4
Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0
5
10 15 20 25 30 35 40
45
50
55
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
A
13mm Allen screw x 16
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
B
Spring washer x 16
C
Allen key x 1
Page 5
Assembly Instructions
4
Step 1
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Assembly is complete.
1
2
1
2
A
A
A
B
A
C
Attaching seat pad
Lay back rest flat on
to the floor.
Note: Ensure the fixing
brackets are facing
upwards as shown.
2
Step 2
Attaching seat pad
Locate seat frame into
position and secure using
fixings and .
Stand the Chair upright.
Repeat for all 4 chairs.
A
B
A
A
1
2
A
A
A
B
Loading...