Hygena 603-6425 Instruction manual

Page 1
Important - Please read these instructions fully before starting assembly
Dimensions
Naples Dining Chair
Assembly Instructions - Please keep for future reference
603/6418
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
603/6425
Width - 45cm
Height - 96.5cm
Issue 1 - 29/10/12
hygena
Page 2
Important - Please read these instructions fully before starting assembly
Safety and Care Advice
!
Cleaning Guidance
1
Care and maintenance
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
• Minor stains and spillages should be removed immediately from cushion fabric, by wiping over lightly with a damp cloth and mild soapy water.
• Light marking can also be removed using this method.
• To remove more stubborn stains or marking, a good quality proprietary domestic fabric cleaner can be used, although it should first be tested on and inconspicuous area of the fabric.
• Check you have all the components and tools listed on pages 2 and 3.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Assemble the item as close to its final position (in the same room) as possible.
• Make sure you have enough space to layout the parts before starting.
• Dispose of all packaging carefully and responsibly.
• Keep these instructions for further use.
• Assemble on a soft level surface to avoid damaging the unit or your floor.
• To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.
Page 3
Please check you have all the parts listed below
Components - Parts
2
If you have damaged or missing components, call the Customer Helpline: 08456 400800
1
Front Leg x 4 (42.5 x 2.2cm)
3
Seat x 2 (48 x 44 x 58.5cm)
2
Rear Leg x 4 (41.5 x 2.2cm)
40CM
39CM
Page 4
2
3
1
2
Front
40cm
1
39cm
Assembly Instructions
3
Step 1
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Assembly is complete.
Attaching seat pad
Place seat frame upside down onto a clean
flat surface. (i.e edge of table top)
Screw long legs into
the holes at the front of the seat.
Screw shorter legs into
the holes at the back of the seat.
Ensure all 4 legs are fully
tightened before turning
over
3
1
2
Loading...