Page 1
Hygena Luna Chair
Assembly Instructions - Please keep for future reference
hygena
476/7095
Dimensions
Width - 50cm
Depth - 52cm
Height - 89cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Issue 1 - 31/08/15
Page 2
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not stand on the chair.
• Do not use this chair as step
ladder.
• This product should not be
discarded with household
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 5.2 kgs.
• Maximum safe weight of user:
110kgs.
waste. Take to your local
authority waste disposal centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
1
Page 3
If you have damaged or missing components, call the
Components - Parts
Customer Helpline: Argos = 0345 640 0800
Please check you have all the parts listed below
Note: The quantities below are the correct amount to complete the assembly of 1 chair.
Seat Frame
1 Left Leg Frame (FL)
(50 x 46.5 x 48cm)
2 Right Leg Frame (FR)
(4 x 44.5 x 43.5cm)
3
(4 x 44.5 x 43.5cm)
Stretcher
4
(Ø2.5 x 34cm)
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more
fittings may be supplied than are required.
A
M6 x 50mm Bolt x 2
D
Wood Cap x 2
Tools required
B
M7 x 35mm Screw x 6
E
Allen Key x 1
C
Barrel Nut x 2
Crosshead screwdriver
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
2
Page 4
Assembly Instructions
Step 1
Attaching stretcher
Attach the stretcher
4
into the holes on left leg
frame and right leg
frame as shown.
Place the barrel nuts
2
3
C
into the holes on the
stretcher. Then align the
holes on the barrel nut by
turning it using a
crosshead screwdriver to
be able to fix the bolts
A
through holes on the
legs. Tighten the bolts
using the allen key .
E
Important note:
Ensure to
correctly position
the leg frame
marked with “FL”
(front left) and
“FR” (front right).
C
4
A
2
C
Sticker
”FL”
C
4
3
Sticker
FL
”FR”
FR
A
3
A
Important note:
Do not fully
tighten bolts at
this stage
Step 2
Attaching leg frames
Place the seat frame
upside down on a raised
protected surface.
Position the assembled
legs making sure part of
the legs with labels “FL”
and “FR” are on the front
of seat frame as shown.
Then fix through the
holes using the screw .
Important note:
Before fully
tightening the
screw B, fully
B
tighten the bolts
A
assembled in
step 1 first using
allen key .
1
B
E
Sticker
”FR”
Sticker
2
”FL”
B
B
B
FL
FL
1
3
B
Sticker
”FR”
B
B
FR
FR
FR
B
3
1
FR
3
Page 5
Assembly Instructions
Step 3
Attaching wood caps
Carefully turn the chair
upright and place the
wood caps into the
holes on the leg frames
2 3
and as shown.
D
2
D
D
3
D
2
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
4
Loading...