Page 1
Luna Low Wide TV Unit
Assembly lnstructions - Please keep for future reference
hygena
457/7553
Dimensions
Width - 120cm
Depth - 40cm
Height -45cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Issue 1-15-10-15
Page 2
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all ttings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been nished using natrual materials. As a living material, you may notice some
variation in the grain and colour shade between the dierent components.
Unlike a synthetic or man-made material which has a uniform nish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result
of any manufacturing fault.
Assemble the item as close
to its nal position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your oor.
Assembly requires 2 people.
Do not stand or put excessive
weight on the product,this could
cause damage.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.
The natural nish should be cared for by the periodic application of a good quality 'was' based
domestic furniture polish (Not silicone!!). Occasional / small spills should be removed immediately
using a damp cloth.
Do not allow hot articles to come into contact with the surface, as damage will occur!
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Page 3
Components - Parts
lf you have damaged or missing components.
call the Customer Helpline:
0345 6400 800
Top
1
(120x40x2.5cm)
inside
3
Side frame (right)
(43x38x5cm)
underside
4
Divider (right)
(37.5x27.5x1.5cm)
Divider (left)
5
(37.5x26 x 1.5cm)
inside
Side frame (left)
2
(43x38x5cm)
Door x 2
6
(28.5x25.5x1.5cm)
Base panel
7
(106x36x1.5cm)
Apron
8
(106x5x1.5cm)
Top stretcher
10
(106x2.6x1.5cm)
top
Shelf
9
(44.6x37x1.2cm)
Foot x 2
11
(3x3x13cm)
Back panel
12
(108.3x29.9x0.3cm)
2
Page 4
Components - Fittings
0345 6400 800
A
Wooden dowel (6X30mm) x23
D
Small locking nut x 4
G
Screw (4x30mm) x 3
K
Screw (2.5x10mm) x 16
N
B C
Metal dowel x 16
E F
F
Screw (3x10mm) x 4
H
J
Screw (4x12mm) x 16
L M
Handle x 2
Q P
Large locking nut x 12
Door stop x 2
Screw (5x40mm) x 6
Screw (4x18mm) x 2
Hinges x 4 Allen key x 1 Shelf support pin x 4
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
0
1 2 3 4 5 6
Ruler/tape measure
Phillips screwdriver
(Not supplied)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
3
Page 5
Assembly Instructions
Preparing panels
Place top and side frames
2
and and apron
at on the oor with the xing
holes facing up.
Screw metal dowels into
all panels as shown.
1
3 8
B
Note: Screw metal dowels as far
as shown. Do not overtighten.
Insert wood dowels into side
frames and as shown .
2 3
A
underside
B
1
A
B
2
A
B
3
BB
B
8
Preparing panels
a: Fit door stops to dividers
and using screws .
4 5
b: Fit door hinges to doors
6
using screws .
c: Insert wood dowels into
the underside of top .
Locate top stretcher into
position and secure using
screws .
BG
BF
BE
BN
BH
BA
1
10
b:
N
H
a:
E
E
5
4
F
F
G
6
X2
10
C:
1
G
A
4
Page 6
Assembly Instructions
Assembling base panel
a: Insert wood dowels into
the holes along the edge of base
panel .
Locate apron into position.
Insert large locking nuts
into the holes in the underside
of base .
Turn locking nuts clockwise
to secure.
7
8
7
b: With help , assemble feet
to base panel using
screws .
BJ
7
BA
BC
11
b:
a:
BC
8
TOP
7
A
C
J
Q
J
7
11
11
Locating base panel
Locate the base panel assembly
onto right side frame .
Insert large locking nuts
into the holes in base panel
and apron .
Turn locking nuts clockwise
to secure.
8
3
BC
7
BC
7
8
BC
3
5
Page 7
Assembly Instructions
Assembling side panel
Locate left side panel into
position.
Secure using large locking nuts
.
BC
2
2
BC
BC
BC
7
3
Assembling dividers
Carefully turn the unit onto it’s
back.
Insert wood dowels into
the bottom of dividers and
as shown.
5
Assemble left and right dividers
and to the base panel
5
using xings
4
BA
4
BJ
Note: Ensure the cut outs in one
corver of dividers and
and at the front.
4 5
Cut outs
at front
4
Right
Left
5
A
7
3
J
Q
6
Page 8
Assembly Instructions
Assembling top
With help , carefully stand the
unit upright.
Insert wood dowels into the
top of side frames and
and dividers and .
Locate top into position.
Insert small locking nuts into
side panels and .
Insert large locking nuts into
dividers and .
Turn locking nuts to secure.
1
2 3
4 5
BA
2 3
4 5
BD
BC
BC
D
1
C
A
4
5
D
2
C
D
3
8
Fitting back panel
Carefully lay the unit at onto it’s
face.
Locate back panel into
position and secure using screws
.
BK
11
K
12
7
Page 9
Assembly Instructions
9
Assembling doors
a: Assemble doors to side
frames and using
screws .
Fit handles to doors using
screws .
2 3
BH
BL
BM
6
a:
H
2
6
L
M
3
6
H
6
b: Insert shelf support pins
into dividers and at
the desired height
Carefully locate shelf onto
the support pins.
4 5
BP
9
b:
X4
P
4
5
P
9
8
Page 10
Assembly Instructions
10
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
9
Loading...