Page 1
Hygena Cubic Wood Glass Display Unit
Assembly Instructions - Please keep for future reference 450/4382D
Dimensions
Width - 65cm
Depth - 30cm
Height - 170cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Issue 1 - 16/09/15
Page 2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 3 & 4.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
Glass safety – Take care when handling glass, please follow the advice below
• •
•
If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
•
Do not strike the glass with
hard or pointed items.
When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
•
Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: if require the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Page 3
Components - Panels
Please check you have all the panels listed below
1
8
7
6
4
9
3
10
10
Top panel
1
(650 x 300 mm)
Bottom panel
2
(646 x 296 mm)
Front left post
3
(1685 x 70mm)
Rear left post
4
(1685 x 70mm)
9
Front right post
5
5
(1685 x 70mm)
Rear right post
6
(1685 x 70mm)
11
9
12
10
10
7
Front top rail x 1
7
11
Bottom rail x 2
(508 x 70mm)
Rear top rail
8
(508 x 70mm)
Side top rail x 2
9
Side bottom rail x 2
2
7
9
(158 x 70mm)
Glass shelf x 4
10
(500 x 296mm)
Side middle rail x 2
11
(158 x 70mm)
Rear middle rail
12
(508 x 70mm)
2
Page 4
Components - Panels
Please check you have all the panels listed below
Top panel
1
(650 x 300 mm)
Bottom panel
2
(646 x 296 mm) (508 x 70mm)
Front top rail x 1
Bottom rail x 2
7
Front left post
3
(1685 x 70mm)
Rear left post
4
(1685 x 70mm)
Front right post
5
(1685 x 70mm)
Rear top rail
8
(508 x 70mm)
Side top rail x 2
Side bottom rail x 2
9
(158 x 70mm)
Glass shelf x 4
10
(500 x 296mm)
Side middle rail x 2
Rear right post
6
(1685 x 70mm)
Rear middle rail
12
(508 x 70mm)
11
(158 x 70mm)
3
Page 5
If you have damaged or missing components,
25mm Screw
x
A
D
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Metal dowel
x
G
Webbing and screw x 2
H
Components - Fittings
call the Customer Helpline: 03456 400800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
B C
Wood dowel x 34
Metal cam x 30
Cover pad x 30
Tools required
E
Shelf holder x 16
Large foot pad x 4
Phillips screwdriver
(medium & small)
Flatblade screwdriver
16
30
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
4
Page 6
Assembly Instructions
Step
Step
1
Screw 22 Metal dowels
into the threaded holes
in the Posts
6
as shown.
3 4
Insert Wood dowels
into the indicated holes.
C
5
A
Middle.
Small holes.
A
C
A
C
3
4
Middle.
A
C
A
C
5
Middle.
2
Firmly push Front left
post and Rear left
post onto the ends
of Side rails ,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
Firmly push Front right
post and Rear right
post onto the ends
of Side rails ,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
3
4
11
9
C
A
5
6
119
C
A
Untaped edge.
Untaped edge.
6
4
9
11
Small holes.
Untaped edge.
3
5
9
11
9
Untaped edge.
6
9
5
Page 7
Assembly Instructions
Step
Step
3
Insert the 12 Metal Cams
D
into the 12 holes on
11
the side rails
9
so that they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of rails (as shown).
Then, using a Philips
Screwdriver, screw all
Metal Cams
D
clockwise until they are
‘ hand tight’.
Note: Longer leg of
th
e cross on the
Metal Cams must
face towards end
of rails.
D
D
4
Firmly push Front and
Rear rails
7
onto the dowels of Left
side post and ,
3 4
ensuring the Metal
dowels and wood
dowels enter
C
A
corresponding holes.
12
8
D
2 pilot holes on rear face.
8
7
Cam holes on the rear.
12
7
4
7
3
6
Page 8
Step
Assembly Instructions
5
8
Insert the 5 Metal Cams
D
into the 5 holes on
the rails
7
12
8
so that they are flush.
7
D
12
7
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panel (as shown).
Then, using a Philips
Screwdriver, screw all
Metal Cams
D
clockwise until they are
‘ hand tight’.
Step 6
Firmly push Right side
frame onto the rails
12
8
, ensuring the
Metal dowels and
wood dowels enter
C
A
corresponding holes.
7
7
D
Note: Longer leg of
the cross on the
Metal Cams must
face towards end
of rails.
Note: Longer leg of
the cross on the
Metal Cams must
face towards end
of panel.
Insert the 5 Metal Cams
D
into the 5 holes on
the rails
1287
so that they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panel (as shown).
Then, using a Philips
Screwdriver, screw all
Metal Cams
D
clockwise until they are
‘ hand tight’.
7
D
6
5
8
12
7
7
4
7
3
Page 9
Assembly Instructions
Step
7
Screw 8 Metal dowels
into the threaded holes
in the Top panel and
Bottom panel as
2
shown.
Insert Wood dowels
into the indicated holes.
C
1
A
C
A
A
C
A
C
A
C
A
1
A
A
2
A
A
C
A
C
C
A
C
A
Step 8
Firmly push Top and
Bottom panels onto the
rails and ,
7
ensuring the Metal
dowels and wood
dowels enter
C
A
corresponding holes.
Insert the 8 Metal Cams
D
into the 8 holes on
the rails and
so that they are flush.
Cams must face towards
end of panel (as shown).
8
87
Note: Longer
leg of the cross
on the Metal
Note: Longer leg of
the cross on the
Metal Cams must
face towards end
of panel.
D
D
D
1
8
7
D
D
D
D
2
7
Then, using a Philips
Screwdriver, screw all
Metal Cams
D
clockwise until they are
‘ hand tight’.
7
D
D
8
Page 10
Step
Assembly Instructions
9
Peel off the cover of the
Foot pads , attach to
the bottom of Posts.
Turn the unit upright.
Screw Shelf holders
onto the pre-drilled holes
in Posts using 25mm
Screws , make sure
the screws of the shelf
holders face downwards
as shown.
H
E
B
1
E
E
B
B
Step 10
Push Glass shelves
into the Shelf holders
and secure with the
screws by turning
clockwise as shown.
Cover all visible cam
holes with Cover pads
G
.
10
E
H
10
9
Page 11
Step
Assembly Instructions
2 Large Wall Screws
11
Note: This Step
is for securing
the Unit to a
wall and should only be
attempted by
experienced persons.
You will Need the
Following:
- Another person to
assist you
- Electric Drill (& Drill
Bits)
- Screwdriver
Fixings Supplied:
- 2 Webbings
- 2 Small Wood
Screws
-
- 2 Wall Plugs
Note: The
fixings
described are
for use with solid
masonry walls only.
Alternative fixings should
be purchased if you have
a different wall
construction.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Help Line: 03456 400800
Home Retail Group plc. Avebury, 489-499 Avebury Boulevard. Milton Keynes. MK9 2NW
10
Page 12
Loading...