Attenborough 3' Ottoman Bed
Assembly lnstructions - Please keep for future reference
hygena
402/3193
418/1499
418/6793
Dimensions (3')
Length - 203 cm
Width- 100 cm
Height - 85 cm
Important Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Issue 1-24-06-15
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2, 3 and 4.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until the
whole bed is assembled. Do not
overtihgten the nuts to avoid
causing damage to the threads.
From time to time check that
there are no loose screws on
this unit.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Important Ottoman Safety Warnings
· Caution.This bed uses a pressurised mechanism.
· Use caution when operating - Always use two hands at arm’s length, and only where
illustrated on the product.
· You must ensure the mattress is on the bed frame before lifting the mechanism - Failure
to do so may result in injury.
· Please ensure Children and pets are kept away from the bed when operating the bed
mechanism.
· If removing the mattress, make sure that the frame is secured as it could flip open.
· Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
· No children or animals are left unattended when the frame is in the ‘up’ position.
· Do not remain on the bed whilst the lifting mechanism is in use.
· Beware of Entrapment - Keep both hands clear of mechanism when operating the
mechanism.
· When lifting the bed remove all bedding - Except the fitted sheet.
v.jpg
X.jpg
1
Components - Parts
Side rail x 2 (1930*310mm)
1
INSIDE
3
Footboard
(1000*310mm)
lf you have damaged or missing components.
call the Customer Helpline : 0345 6400 800
FRONT
Headboard
2
(1000*810mm)
Hinges (x 1 pair)
4
(750*115mm)
Base panel x 2 (600*928mm)
6
Ottoman end frame x 2
9
(910*118mm)
Piston x 2
5
(420mm)
Base panel x 1 (724*928mm)
7
10
Ottoman side frame
(1822*30mm)
Note:Extra holes
Feet x 4
8
(62*33*41.6mm)
2
Components - Parts
11
Ottoman side frame
(1822*30mm)
lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
12
Bentwood Slats x 14
(903*9*53mm)
Wooden support rail x 2 (930*60mm)
14
Slat caps x 28 (5.5mm)
16
13
Base Support x 4 (120*20mm)
Metal support rail x 1 (930*20mm)
15
Corner bracket x 4
17
(120*80mm)
Mattress support
18
bracket x 2
(Ø6*78mm)
3
Components - Fittings
0345 6400 800
A
25mm M8 Bolt x 16 15mm M6 Bolt x 24
B C
D E
Nut x 4
G
4mm Allen key x 1
19mm Flat washer x 8
H
Spanner x 1
35mm M4 Wood screw x 28
F
5mm Allen key x 1
Tools required
Ruler/tape
measure
Phillips screwdriver
(Not supplied)
PLIERS (Not
supplied)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
4