Page 1
Emmett - Pair of Wooden Chairs
Assembly Instructions - Please keep for future reference
156/8589
Dimensions
Width - 44.2cm
Depth - 51.3cm
Height - 88cm
Important - Please read these instructions fully before starting assembly.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 23/06/12IW-17-7521-172-0
Page 2
Safety and Care Advice
Important - Please read these instructions fully before starting assembly.
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft flat / firm
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/ drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly .
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Page 3
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A B C
60mm Hex head bolt x 12 15mm Hex head bolt x 4 Seat bracket x 4
D
Allen key x 1
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150105 155 160 165 170
2
Page 4
Assembly Instructions
Step 1
Attaching aprons
Position aprons and
onto back leg frame
5
.
1
4
Note: Ensure the
tenons are aligned
correctly with mating
back leg frame to avoid
damage.
Fix aprons and to
back leg frame using
4 bolts as shown.
Use allen key to turn
fitting clockwise to fix.
4 5
1
A
D
A
D
A
D
A
A
4
A
A
5
A
1
Step 2
Attaching front leg
frame
Position front leg frame
onto aprons and
2
5
.
4
Note: Ensure the
tenons are aligned
correctly with mating
front leg frame to avoid
damage.
2
4
5
3
Page 5
Assembly Instructions
Step 3
Fixing front leg frame
Carefully stand chair
upright.
Fix front leg frame to
aprons and using 2
bolts as shown.
Use allen key to turn
fitting clockwise to fix.
4 5
A
A
2
D
Front side
A
D
4
A
A
2
D
A
5
Step 4
Placing seat pad.
a: Place seat pad on
a flat, stable, clean and
soft surface as shown.
3
b: Lower the constructed
chair frame onto seat pad
as shown.
3
Note: Ensure wooden
locator block is inside
front leg frame as
shown.
2
a:
Wood locator
b:
Wood locator
3
2
3
4
Page 6
Assembly Instructions
Step 5
Fixing seat pad.
a: Insert 2 seat brackets
C
into the slots on
aprons and as
shown.
Note: Align holes on
seat brackets with
holes on seat pad .
4 5
C
3
D
C
a:
B
C
b:
5
b: Insert 2 bolts into
the holes of seat brackets
and the holes of
C
mating seat pad as
shown.
Use allen key to turn
fitting clockwise to fix.
Repeat complete
process for second
chair.
B
B
3
D
3
4
B
C
D
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
5
Loading...