Hygena 152-8062, 151-7358 Instruction manual
Hamlin - 2 Doors Robe
Assembly Instructions - Please keep for future reference
h y g e n a
152/8062
151/7358
151/2683
Dimensions
Width - 80,2cm
Depth - 55,8cm
Height - 192cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Issue 1 - 28/10/13
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Care and maintenance
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Components - Panels
Please check you have all the panels listed below
Right side panel (190 x 54cm)
1
top
Left side panel (190 x 54cm)
2
top
underside
Top panel (80.2 x 55.8cm)
7
underside
Base panel (77 x 54cm)
8
underside
Door x 2 (179 x 35cm)
3
Door knocker x 2 (178 x 8cm)
4
Back panel x 2 (180.8 x 39.1cm)
5
H profile (179 x 1.8cm)
6
Shelf (77 x 52.7cm)
9
Bottom frame (77 x 9.6cm)
10
Unfinished bottom frame
11
(77 x 9.6cm)
Hanging rail (76.2 x 3cm)
12
2
If you have damaged or missing components,
Components - Fittings
call the
Customer Helpline: 08456 400 800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A B
Wooden dowel x 20
D
Locking
nut x 12
J
Plastic
feet x 4
M
Washer x 2
P
14mm Screw x 28
E F
25mm Screw x 1416mm Screw x 1
Nail x 67
K
L shaped
bracket x 6
N
Plastic
x 12
cap
C
14mm Screw x 24
Metal dowel x 12
IG H
Nail x 4
L
Hanging rail
support x 2
O
Wall strap x 1
Door
hinge x 6
Tools required
Phillips screwdriver
(small & medium)
Small
hammer
Ruler - Use this ruler to help correctly identify the screws
m
2
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
5
0
10 15 20 25 30 35 40
55
45
50
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
3
Loading...