Hydro systems EvoRinse Installation And Operation Manual

EvoRinse

Installation and Operation Manual

HYD90098598 Rev A

Contents

1 Specification

Description
Product Features
Specification
Intended Use
Product Diagram
Kit Contents

2 Installation

Site Survey & Installation Requirements
Installation Diagram
Mechanical Installation

Wall mounting
Rinse discharge hose connection
Rinse aid tube connection (product option)
Water connection

Electrical Installation

Electrical connections
Mains power wiring

3 Troubleshooting

Dead Unit

4 Maintenance

Maintenance
Every Maintenance Visit
Spray Nozzle Replacement

5 Spare Parts

6 Decommissioning & Disposal

7 Safety

8 EC Declaration of Conformity

9 WEEE

2

1. Specifications

1.1 Description

The EvoRinse is a rinse powder / solid rinse aid dissolver for
use with EvoWash warewash machines.

1.2

Product Features

Bottle lockout feature to prevent non-approved chemicals
being used in the product.

1.3 Specification

Product Dimensions (unboxed)

Size 254mm (W) x 366mm (L) x 234mm (D)

Weight 2.3 Kg

Product Dimensions (boxed)

Size 370mm (W) x 425mm (L) x 305mm (D)

Weight 3.4 Kg

Electrical

Input voltage / Frequency / Current 100 to 240 VAC / 50/60 Hz. / 1.5 A (Max.)
Power 12W (Max)
Electrical Class Class II

Installation Environment

Temperature 10°C to 50°C (max.)
Humidity 95% relative humidity (max.)
Indoor Installation Indoor use only. Must not be installed outdoors

Performance

Detergent dissolution rate Min-max

Water Inlet Connection

Water temperature 5°C to 60°C (max.)
Pressure 0.2MPa (2 bar) - 0.6MPa (6 bar)
Inbuilt backflow prevention - EN1717 DB - Category 4 chemicals

1.4 Intended Use

• The EvoRinse is intended for use in industrial applications
and is not suitable for domestic use.

• The product must only be used for rinsing in dish and
warewash applications. The manufacturer waives any
responsibility arisen from incorrect usage or transportation.

3

x 4

x 4

x 4

2

x 2

1.5 Product Diagram

1

2

KEY:

1. Switch Lever

2. Keyway (optional)

3. Fixing Points (x4)

4. Water Inlet

5. Water Filter

6. Mesh Screen

7. Water Spray Nozzle

7

6

5

4

3

1.6 Kit Contents

4

2. Installation

CAUTION Before an installation takes place it is

advisable to complete a site survey to ensure
the EvoRinse can be installed in a position that
meets all the requirements below.

CAUTION Do not install unit in an ATEX environment

WARNING Electrical installation should be completed

by a qualified electrician. All local and
national electrical regulations are to be
observed.

2.1 Site Survey & Installation Requirements

• Unit is to be installed by a trained technician; all local and
national water regulations are to be observed.

• Unit must be installed indoors, in an area that does not
suffer excess temperature changes, direct sunlight, frost or
precipitation of any kind.

• The area must be free of high levels of EMC disturbance.

• Ensue the unit is mounted in an accessible location, above
the height of the dishwasher detergent and rinse inlet
connections.

• Installer to ensure the suitability of the wall or mounting
substrate, which should be flat and perpendicular to the
floor.

• Unit location should be well lit for any maintenance, and
should be free of high levels of dust particulates.

• Scheduled maintenance should be carried out on the unit
at least once per year.

• It is a legal requirement that all water supply hose sets must
be compliant with IEC 61770.

• Ensure that the chemicals being used are compatible with
the tubing supplied. If you are unsure, please contact your
local distributor.

5