Hydrogen For Health PEM+ Instruction Manual
Hydrogen rich water bottle instruction manual
Model: PEM+
Advanced features:
PEM Dual Chamber membrane technology, DuPont® membrane
Distilled water, purified water, RO water are all acceptable
Separates and expels harmful by-products of Chlorine, Ozone and Oxides
Produces the highest industry levels of molecular Hydrogen concentrates
No filters or any expensive parts to replace
Long electrolysis plate life
Important Information:
Water quality that should be used
To receive the best results and highest quality H2 water we recommend using good quality drinking
water. (distilled, purified or RO water) Do NOT put carbonated liquids in the bottle. They will
generate too much pressure that can damage the bottle.
Before using bottle for the first time
Fill the bottom of bottle with 1 inch of water and let sit for 4 to 5 hours to saturate the PEM
membrane. If the bottle is left dry for long periods of time you will want to repeat this step.
Storage of hydrogen water
You may store your water in the refrigerator. A sealed container will keep it active.
Cleaning and regular maintenance
Avoid using organic solvents or strong chemicals. Mild soap and water works best.
Do not soak in water
Do not put the lower generator base of the bottle into water. It contains electrical components that can
be damaged by immersing into water.
Avoid direct sunlight
Keep the bottle away from direct sunlight.
Avoid freezing
Keep the bottle away from freezing temperatures.
Warranty service
Warranty service should only be done by factory authorized distributor or repairman. Contact us at
info@hydrogen4health.com If your bottle needs service.
Product parts diagram:
Before first use：
Remove silicone rubber plug from generator base. This plug is used to keep membrane wet
during shipping and storage.
Fill bottle with at least 1 inch of water to activate membrane. Membrane must be fully
saturated with water. Let bottle sit for 4-5 hours to fully saturate.
Loading...