Hydra-Kool KPMOF80S Specifications
REFRIGERATED REAR STORAGE
MODELS
KPM-OF-(60, 80, 100)-S
KPM-OF-(60, 80, 100)-R
CASE HOLDS 33°F TO 40°F • FORCED AIR REFRIGERATION • TEMPERED FRONT AND SIDE GLASS
REFRIGERATED REAR STORAGE • CASES CAN BE MULTIPLEXED
OPEN FRONT DELI CASE DESIGNED FOR
DELI PRODUCTS AND PACKAGED MEAT
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
OPEN FRONT DELI CASE DESIGNED FOR
DELI PRODUCTS AND PACKAGED MEAT
3
Compressor
H.P F.L.A L.RA
Electrical 115 Volts
LIGHTS
Fans
EVAP
Pan
Total
Amps
NEMA
115 V
Plug
Weight lbs
No
Crate
With
Crate
L” W” H”
Model
O.A.
Length
(inches)
Volume FT
Front Rear
KPM-OF-60-S 60 9.29 5.33 1/2 9.6 49 0.83 3.3 14.08 5-15P 407 630 67 44 42
SELF CONTAINED
KPM-OF-80-S 77.5 12.15 8.76 1/2 9.6 49 0.96 3.3 14.08 5-15P 495 758 85 44 42
KPM-OF-100-S 101.2 16.00 13.41 5/8 8.9 47 1,31 3.3 13.51 5-15P 620 939 108 44 42
Weight lbs
No
Crate
With
Crate
Model
KPM-OF-60-R
REMOTE
KPM-OF-80-R
KPM-OF-100-R
STANDARD FEATURES
O.A.
Length
(inches)
Number
60 1
77.5 2
101.2 3
of Read
Doos
115 Volts
Total Amps
B.T.U
0.70 2959 352 575
0.70 3253 440 703
1.05 4372 565 884
Tempered side glass
CFC free injected foam insulation
Silver colored PVC coated steel front panel
PVC coated steel gray interior
Black steel kick plate
Foamed polystyrene black end panels
Rear work bench
Temperature and defrost regulated by a digital controller
Removable condensate evaporating pan for easy cleaning on
self contained units
Slide out condensing unit on self-contained units
Digital thermometer
Levelling feet
Crate Size
(inches)
OPTIONAL FEATURES
Stainless steel interior and / or exterior
Other colors available
White epoxy bi-level wire racks
2 or 3 level step sham
Scale stand with receptacle
Cutting board
Knife support
Joining Kit
Partition
Condensate evaporating pan
Casters add 4-3/8” to height
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
06/2017
sales@mvpgroupcorp.com / mvpgroupcorp.com
Standard Mounting Optional Mounting
Levelling Feet Adjustable Legs
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are
provided with an expansion valve and a liquid solenoid for pump down
cycle. On remote cases, if no floor drain is provided, a condensate
evaporating pan must be ordered and 3.3 amps added to the amp load.
Remote cases must be hard wired – no plugs.
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Casters
Loading...