Hydra-Kool KGLRS60S Specifications

ELECTRIC SHUTTER
REAR LOADING
MODELS
KGL-RS-(40, 60)-S KGL-RS-(40, 60)-R
CASE HOLDS 38°F TO 40°F • FORCED AIR REFRIGERATION • OPEN FRONT
FRONT AND REAR LOADING • KEY OPERATED ELECTRIC SHUTTER • TEMPERATURE RECORDER
GRAB-N-GO LOW PROFILE CASE
FRONT AND REAR LOADING, ELECTRIC SHUTTER
AVAILABLE WITH A BLUE DECAL *CONTACT OUR SALES DEPARTMENT FOR MORE INFORMATION
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
GRAB-N-GO LOW PROFILE CASE
FRONT AND REAR LOADING ELECTRIC SHUTTER
Volume
3
O.A.
Model
KGL-RS-40-S 41 12.98 5/8 8.9 1.29 6.7 16.8 5-20P 419 585 44 39 74
SELF CONTAINED
Length
(inches)
FT
Front
Compressor LIGHTS
H.P F.L.A
Electrical 115 Volts
Fans
HTRS
EVAP
Pan
Total
Amps
NEMA
115 V
Plug
Weight lbs
No
Crate
With
Crate
Crate Size (inches)
L” W” H”
KGL-RS-60-S 60.6 19.85 3/4 16 2.35 6.7 25 HW 510 750 64 39 74
HW = Hard wired Remote cases are hard wired
REMOTE
Model
O.A.
Length
(inches)
115 Volts Total
Amps
B.T.U
Weight lbs
No
Crate
With Crate
KGL-RS-40-R 41 0.9 4190 361 515
KGL-RS-60-R 60.6 1.4 5835 430 635
SPECIAL FEATURES
Locking back doors for rear loading Key operated electric shutter
STANDARD FEATURES
Silver colored PVC coated steel front panel with a silver decal CFC free injected foam insulation PVC coated steel gray interior Dark Gray anthracite kick plate Foamed polystyrene black end panels Tempered side glass LED lighting in canopy and under shelves Temperature and defrost regulated by a digital controller Removable condensate evaporating pan for easy cleaning Product stops on all shelves Height adjustable, shelves can be tilted Levelling feet
MOUNTING
OPTIONAL FEATURES
Standard Optional
Graphics on upper and lower front panels Stainless steel exterior and / or interior Other colors available Additional shelves
Levelling Feet Caster Kit
Price tag molding Product dividers Condensate evaporating pan for remote cases KGL-RS caster kit for self contained units only
WARRANTY
One year parts and labor with an additional four years on the compressor (part only)
NOTE
These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R404a refrigerant. Alter­nate refrigerants available by special order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills at front and back cannot be blocked. B.T.U.’s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are pro­vided with an expansion valve and a liquid solenoid for pump down cycle. On remote cases, if no oor drain is provided, a condensate evaporating pan must be ordered and 6.7 amps added to the amp load. Remote cases must be hard wired – no plugs.
06/2017
Tel: 786.600.4687 / Toll Free: 844.218.8477 Fax: 786.661.4100 Tel: 514.737.9701 / Toll Free: 888.275.4538 Fax: 514.342.3854 / toll free: 877.453.8832 sales@mvpgroupcorp.com / mvpgroupcorp.com
Hydra - Kool is a registered trademark of MVP Group Corp. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE