Hydra-Kool KGLOF50S Specifications
MODELS
KGL-OF-(40, 50, 60)-S
KGL-OF-(40, 50, 60)-R
CASE HOLDS 36°F TO 40°F • FORCED AIR REFRIGERATION • OPEN FRONT
FRONT LOADING • LED LIGHTING IN CANOPY AND UNDER ALL SHELVES
PULL DOWN NIGHT CURTAIN • CASES CAN BE MULTIPLEXED
GRAB-N-GO
LOW PROFILE CASE
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
GRAB-N-GO LOW PROFILE CASE
Crate Size (inches)
L” W” H”
Model
Width
(inches)
Front
Capacity
Cu.ft
Electrical 115 Volts
Compressor
H.P F.L.A
Total
Amps
NEMA
Plug
Weight lbs
No
Crate
With
Crate
KGL-OF-40-S 41 12.98 5/8 8.9 16.42 5-20P 357 507 43.8 34.5 67.8
SELF CONTAINED
KGL-OF-50-S 50.2 16.21 3/4 16 24.00 Hard-wired 394 569 53 34.5 67.8
KGL-OF-60-S 60.6 19.85 3/4 16 24.06 Hard-wired 454 653 63.5 34.5 67.8
Model
KGL-OF-40-R 41 4125 0.40 Hard-wired 291 441
REMOTE
Width
(inches)
B.T.U
115 Volts
Total
Amps
Nema Plug
Weight lbs
No
Crate
With
Crate
KGL-OF-50-R 50.2 4897 0.43 Hard-wired 317 491
KGL-OF-60-R 60.6 5141 0.49 Hard-wired 376 575
STANDARD FEATURES
Silver colored PVC coated steel front panel
Pull down night curtain
CFC free injected foam insulation
PVC coated steel gray interior
Black steel kick plate
Foamed polystyrene black end panels
Tempered side glass
Height adjustable shelves can be tilted
Products stop on shelves
Temperature and defrost regulated by a digital controller
Digital thermometer
Slide out condensing unit on self-contained units
Removable condensate evaporating pan for easy
cleaning on self contained units
Cord and plug KGL-OF-40S only
Levelling feet
OPTIONAL FEATURES
Stainless steel exterior and / or interior
Other colors available
Additional shelves
Price tag molding
Joining kit
Partition or product dividers
Condensate evaporating pan for remote cases
Casters-add 4-3/8” to height
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
10/2018
sales@mvpgroupcorp.com / mvpgroupcorp.com
Standard Mounting Optional Mounting
Casters
Levelling Feet Adjustable Legs
NOTE
These cases are engineered to operate in locations
not exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are
provided with an expansion valve and a liquid solenoid for pump down
cycle. On remote cases, if no oor drain is provided, a condensate
evaporating pan must be ordered and 6.7 amps added to the amp load.
Remote cases must be hard wired – no plugs.
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Casters
Loading...