Hydra-Kool KFMSC80S Specifications
MODELS
CURVED GLASS SEAFOOD CASE
DESIGNED FOR FRESH FISH
KFM-SC-(40, 50, 60, 80, 100, 120)-S
KFM-SC-(40, 50, 60, 80, 100, 120)-R
CASE HOLDS 33°F TO 40°F • LOW VELOCITY FORCED AIR REFRIGERATION MAINTAINS HIGH HUMIDITY
TEMPERED SIDE GLASS AND REAR SLIDING DOORS • CASES CAN BE MULTIPLEXED
CAN BE USED WITH OPTIONAL ICE PANS • CASES REQUIRE FLOOR DRAINS
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
CURVED GLASS SEAFOOD CASE
DESIGNED FOR FRESH FISH
Model
O.A.
Length
(inches)
Volume
3
FT
Front
Electrical 115 Volts
Compressor
H.P F.L.A
LIGHTS
Fans HTRS
Total
Amps
NEMA
115 V
Plug
Weight lbs
No
Crate
With
Crate
Crate Size (inches)
L” W” H”
KFM-SC-40-S 40.4 12.35 3/8 8.4 0.95 9.35 5-15P 333 494 48 44 42
KFM-SC-50-S 52.2 16.27 1/2 9.6 0.96 10.56 5-15P 377 560 59 44 42
KFM-SC-60-S 60 18.88 1/2 9.6 1.08 10.66 5-15P 427 626 67 44 42
SELF CONTAINED
KFM-SC-80-S 77.5 24.70 5/8 8.9 1.68 10.58 5-15P 531 794 85 44 42
KFM-SC-100-S 101.4 32.54 3/4 16 1.81 17.81 5-15P 658 937 109 44 42
KFM-SC-120-S 117 37.76 3/4 16 2.06 18.06 -- 785 1160 124 44 42
Kit No For Model
KT025A KFM-SC/SF/SO-40-S/R
KT025B KFM-SC/SF/SO-50-S/R
Model
O.A.
Length
(inches)
115 Volts
Total
Amps
B.T.U
KT025C KFM-SC/SF/SO-60-S/R
KT025D KFM-SC/SF/SO-80-S/R
KT025E KFM-SC/SF/SO-100-S/R
OPTIONAL ICE / FISH
STANDARD FEATURES
KT025F KFM-SC/SF/SO-120-S/R
Coated evaporator coil
Stainless steel frame
KFM-SC-40-R 40.4 0.5 2548 278 439
KFM-SC-50-R 52.2 0.51 3015 322 505
REMOTE
KFM-SC-60-R 60 0.63 3159 373 571
KFM-SC-80-R 77.5 0.78 4345 498 761
KFM-SC-100-R 101.2 0.91 5112 604 882
KFM-SC-120-R 117 1.16 5472 721 1093
Stainless steel interior
Stainless steel rear work bench
Silver colored PVC coated steel front panel
CFC free injected foam insulation
Black steel kick plate
Foamed polystyrene black end panels
Tempered tilt foward front glass
Removable rear tempered glass sliding door
LED lighting in canopy
Temperature and defrost regulated by a digital controller
Slide out condensing unit on self-contained units
Anti condensing system for front glass
Digital thermometer
Levelling feet
OPTIONAL FEATURES
Ice/sh pan kit. See table above
Stainless steel exterior
Other colors available
Standard Mounting Optional Mounting
Joining Kit
Partition
Scale stand with receptable
Cutting Board
Knife Support
Casters add 4-3/8” to height
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
WARRANTY
One year parts and labor with an additional four years on
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-7/8” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are provided with an
expansion valve and a liquid solenoid for pump down cycle, Remote cases
must be hard wired-no plugs.
Levelling Feet Adjustable Legs Casters
the compressor (part only)
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
06/2017
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Weight lbs
No
Crate
With
Crate
Loading...