Hydra-Kool KFMOF80S Specifications
MODELS
OPEN FRONT DELI CASE
DESIGNED FOR FRESH MEAT
KFM-OF-(40, 50, 60, 80, 100, 120)-S
KFM-OF-(40, 50, 60, 80, 100, 120)-R
CASE HOLDS 33°F TO 40°F • LOW VELOCITY FORCED AIR REFRIGERATION MAINTAINS HIGH HUMIDITY
TEMPERED FRONT & SIDE GLASS • CASES CAN BE MULTIPLEXED
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
OPEN FRONT DELI CASE
DESIGNED FOR FRESH MEAT
Crate Size
Electrical 115 Volts
LIGHTS
Fans
HTRS
EVAP
PAN
Total
Amps
NEMA
115 V
Plug
Model
O.A.
Length
(inches)
Volume
3
FT
Compressor
H.P F.L.A
KFM-OF-40-S 40.4 6.07 3/8 8.4 0.65 3.3 12.38 5-15P 285 445 48 44 42
KFM-OF-50-S 52.2 8.00 1/2 9.6 0.65 3.3 13.58 5-15P 322 505 59 44 42
SELF CONTAINED
KFM-OF-60-S 60 9.29 1/2 9.6 0.75 3.3 13.68 5-15P 365 564 67 44 42
KFM-OF-80-S 77.5 12.15 5/8 8.9 1.20 3.3 13.43 5-15P 451 714 85 44 42
KFM-OF-100-S 101.2 16.00 3/4 16 1.30 3.3 20.63 N/A 565 844 109 44 42
KFM-OF-120-S 117 18.58 3/4 16 1.40 3.3 20.73 N/A 680 1053 124 44 42
Weight lbs
No
Crate
With
Crate
(inches)
L” W” H”
Model
O.A.
Length (inches)
115 Volts
Total Amps
B.T.U
KFM-OF-40-R 40.4 0.2 2548 229 390
KFM-OF-50-R 52.2 0.2 3015 267 450
REMOTE
KFM-OF-60-R 60 0.3 3159 311 509
KFM-OF-80-R 77.5 0.3 4345 419 681
KFM-OF-100-R 101.2 0.4 5112 511 789
KFM-OF-120-R 117 0.5 5472 615 988
STANDARD FEATURES
CFC free injected foam insulation
Silver colored PVC coated steel front panel
PVC coated steel gray interior
Black steel kick plate
Stainless steel rear work bench
Foamed polystyrene black end panels
Temperature and defrost regulated by a digital controller
Removable condensate evaporating pan for easy cleaning on
self contained units
Slide out condensing unit on self-contained units
Digital thermometer
Levelling feet
OPTIONAL FEATURES
Stainless steel exterior
Other colors available
Joining Kit
Partition
Condensate evaporating pan for remote cases
White epoxy bi-level wire racks 2 or 3 level step sham
Scale stand with receptacle
Knife support
Cutting board
Casters add 4-3/8” to height
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
Weight lbs
No
Crate
With
Crate
Standard Mounting Optional Mounting
Levelling Feet Adjustable Legs Casters
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are
provided with an expansion valve and a liquid solenoid for pump down
cycle. On remote cases, if no oor drain is provided, a condensate
evaporating pan must be ordered and 3.3 amps added to the amp load.
Remote cases must be hard wired – no plugs.
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
06/2017
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Loading...