Hydra-Kool KFMGL60S Specifications
STAINLESS STEEL PANS
MODELS
KFM-GL-(40, 60, 80)-S
LOW TEMPERATURE • FORCED AIR REFRIGERATION • LIFT UP TEMPERED FRONT GLASS
12, 16, AND 22 PAN CONFIGURATIONS • CASES CAN BE MULTIPLEXED
CURVED GLASS GELATO CASE
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
CURVED GLASS GELATO CASE
O.A.
Model
KFM-GL-40-S 40.4 -4 / -7 oF 10.0 0.26 10.3 22.9 661
SELF CONTAINED
Length
(inches)
Case
Temp
Electrical 115 Volts
Compressor
F.L.A
LIGHTS
Fans
HTRS
Defrost
Total
Amps
KFM-GL-60-S 58.2 -4 / -7 oF (2) 10.0 0.49 20.5 26.4 860
KFM-GL-80-S 77.5 -4 / -7 oF (2) 10.0 0.53 20.5 26.4 992
STANDARD FEATURES
Tempered side glass
CFC free injected foam insulation
Silver colored PVC coated steel front panel
PVC coated steel gray interior
Black steel kick plate
All trim and glass supports-aluminum
Stainless steel pans
Lift up tempered front glass
Thermopane end glass
Stainless steel work bench
Removable rear plexiglass sliding doors
Temperature and defrost regulated by a digital controller
Levelling feet
Amp
Weight
lbs
OPTIONAL FEATURES
Stainless steel interior exterior
Other colors available
PAN CONFIGURATIONS
(10) Pans 14-1/8” long x 6-1/2” wide x 6” deep KFM-GL-40-S
(16) Pans 14-1/8” long x 6-1/2” wide x 6” deep KFM-GL-60-S
(22) Pans 14-1/8” long x 6-1/2” wide x 6” deep KFM-GL-80-S
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
Standard Mounting Optional Mounting
Levelling Feet Adjustable Legs
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Ventilation grills at front and back
cannot be blocked.
Casters
06/2017
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Loading...