Hydra-Kool KFMFG100S Specifications
MODELS
FLAT GLASS DELI CASE
DESIGNED FOR FRESH MEAT
KFM-FG-(40, 50, 60, 80, 100, 120)-S
KFM-FG-(40, 50, 60, 80, 100, 120)-R
CASE HOLDS 33°F TO 40°F • LOW VELOCITY FORCED AIR REFRIGERATION MAINTAINS HIGH HUMIDITY
TEMPERED TILT OUT FLAT FRONT GLASS • TEMPERED SIDE GLASS & REAR SLIDING DOORS
CASES CAN BE MULTIPLEXED
IN COMPLIANCE
WITH
NATIONAL
ENERGY
STANDARDS
®
®
FLAT GLASS DELI CASE DESIGNED
FOR FRESH MEAT
Crate Size (inches)
L” W” H”
Model
O.A.
Length
(inches)
Volume
3
FT
Electrical 115 Volts
Compressor LIGHTS
H.P F.L.A
Fans
HTRS
EVAP
PAN
Total
Amps
NEMA
115 V
Plug
Weight lbs
No
Crate
With
Crate
KFM-FG-40-S 40.4 15.35 3/8 8.4 0.95 3.3 12.68 5-15P 350 512 48 44 42
KFM-FG-50-S 52.2 20.22 1/2 9.6 0.96 3.3 13.89 515P 399 582 59 44 42
KFM-FG-60-S 60 23.47 1/2 9.6 1.08 3.3 14.01 5-15P 451 650 67 44 42
SELF CONTAINED
KFM-FG-80-S 77.5 30.70 5/8 8.9 1.68 3.3 13.91 5-15P 561 825 85 44 42
KFM-FG-100-S 101.2 40.45 3/4 16 1.81 3.3 21.14 N/A 695 974 109 44 42
KFM-FG-120-S 117 46.95 3/4 16 2.06 3.3 21.39 N/A 830 1204 124 44 42
Weight lbs
No
Crate
With
Crate
Model
O.A.
Length (inches)
115 Volts
Total Amps
B.T.U
KFM-FG-40-R 40.4 0.5 2548 295 456
KFM-FG-50-R 52.2 0.51 3015 344 526
REMOTE
KFM-FG-60-R 60 0.63 3159 397 595
KFM-FG-80-R 77.5 0.78 4345 529 791
KFM-FG-100-R 101.2 0.91 5112 642 919
KFM-FG-120-R 117 1.16 5472 765 1138
STANDARD FEATURES
CFC free injected foam insulation
Stainless steel interior
Stainless steel rear work bench
Silver colored PVC coated steel front panel
Black steel kick plate
Foamed polystyrene black end panels
Tempered tilt-foward front glass
Removable rear tempered glass sliding doors
LED lighting in canopy
Standard Mounting Optional Mounting
Temperature and defrost regulated by a digital controller
Removable condensate evaporating pan for easy cleaning on
self contained units
Slide out condensing unit on self-contained units
Digital thermometer
Levelling feet
OPTIONAL FEATURES
Stainless steel exterior
Other colors available
Joining Kit
Partition
Condensate evaporating pan for remote cases
White epoxy bi-level wire racks; 2 or 3 level step sham
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are
provided with an expansion valve and a liquid solenoid for pump down
cycle. On remote cases, if no floor drain is provided, a condensate
evaporating pan must be ordered and 3.3 amps added to the amp load.
Remote cases must be hard wired – no plugs.
Levelling Feet Adjustable Legs
Scale stand with receptacle
Cutting board
Knife Supprt
Casters add 4-3/8” to height
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
Casters
06/2017
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Loading...