Hydra-Flex Aqua-Lab + Tsunami User Manual

RELIABLE FOAM DELIVERY
TM
AQUA-LAB + TSUNAMI
DISPENSING SYSTEM FOAM APPLICATOR
WITH STUNNING
VISUAL RESULTS
EXCELLENT COVERAGE– Get better performance
out of your waxes, soap, or pre-soak using proven Aqua-Lab
dispensing technology combined with the Tsunami applicator
THREE-COLOR ABILITY – Chemical, air, and ow
for each color can be individually controlled. Fully customiz-
able system even allows the exibility to adjust scent and color
intensity.
7 GPM FLOW – Aqua-Lab system offers impressive
foam coverage yet uses signicantly less chemical and water
than similar applicators using traditional pumping and propor-
tioning systems.
EASY INSTALLATION – All components are easy to
mount and system integrates quickly with main controls.
www.hydraexinc.com
TSUNAMI FOAM APPLICATOR +
Aqua-Lab Chemical
AQUA-LAB CHEMICAL DISPENSING
SYSTEM INCLUDES
(1) Tsunami Stainless Steel Foam Bar and Tray
(1) Aqua-Lab Single Application Chemical Dispensing Panel
(1) 7 GPM Pump
(1) Electrical Box
(1) Triple Foam Manifold
(3) Foaming Air Regulators with (3) Pressure Gauges
(3) Chem-Flex Injectors each @ 2.25 GPM (P/N 618086)
(3) Foam Generators
OPTIONAL EQUIPMENT
3” Stainless Steel Arch 10’ x 8’
LED Light Bar
DIMENSIONS (W x H inches)
Tsunami Mounting Manifold 91 x 1.5 square
Tsunami Foam Tray 86 x 8
Aqua-Lab Chemical Dispensing Panel 17 x 22
Foaming Air Regulator with Pressure Gauge
Electrical Box
Dispensing Panel withTriple Foam Manifold and (3) Chem-Flex Injectors
7 GPM Pump
Pump 8 x 36
Electrical Box 9.5 x 6
SYSTEM REQUIREMENTS
Power 115V/1PH/18A or 230V/1PH/9A
Inlet Water Pressure 2-60 PSI
Water Inlet Line 3/4” ID
Solution Outlet Lines (3) 1/2” Polyow
Water Filtration 50 Micron
Maximum Water Source Temperature 140°F
Air Inlet Pressure 60 PSI Min. / 120 PSI Max.
Air Inlet Line 3/8” Polyow
Air Outlet Lines (3) 3/8” Polyow
www.hydraexinc.com
680 East Travelers Trail • Burnsville, MN 55337 T: 952-808 3640 • F: 952-808-3650
info@hydraexinc.com
P/N 3001070 revA0413
Loading...