Hybroad Vision Electronics Technology SP 110 User Manual

Contents

Attentions .............................................................................. 2

S

AFETY GUIDE .................................................................................. 2

AFETY PRECAUTIONS..................................................................... 2

S

ERVICING ........................................................................................ 2

S
I

NSPECTION OF ALL ATT ACHMENTS .................................................. 3

Preparation ............................................................................ 4

F

RONT PANEL ................................................................................... 4

EAR PANEL ..................................................................................... 4

R
R

EMOTE CONTROLLER ..................................................................... 5

SAGE TIPS ...................................................................................... 5

U
W

AY OF CONNECTION ...................................................................... 6

Technical Specification ......................................................... 7

1

Attentions

Safety Guide

1. Must correct ly select the power suppl y voltage, and do not
use the power supply outside the provided voltage value.

2. Before opening the power supply, make sure whether the
power cord and all connections ar e connected c orrect ly and
completely.

3. if the machine is not used for a long time or is cleaned and
maintained, pull t he power plug f rom the power outlet a nd
pay attention not t o pulling the power cord.

4. When unplugging the power cord, should first close the
current power supply, and pul l out the insulatio n part of the
plug with a hand slowly.

Safety Precautions

1. Do not place the machine in direc t sunlight or at the place
near a heat radiation device.

2. Should place the m achine on the lev el and solid surfac e to
prevent vibration affecting the machine to w ork properly.

3. Should place the machine at a well-ventilated place, where it
is not humid or dusty near.

4. Wipe the surface of the machine gently with a soft cloth, and
do not to use alcohol, gasoline and other organic solvents to
clean it.

5. Do not use the machine under the weight, impact or
vibration.

Servicing

1． Because the machine has complex internal circuits,

non-professionals are not allowed to open the upper cover of
it to avoid damage to it .

2． Users do not dismantle the machine parts freely, and the

warranty tag will expire if the machine is opened to be
repaired.

3． If it is confirmed t o be maintained, please contact the local

warranty departm ent to arrange maintenance.

4． If some parts need to be replac ed, repair technicians m ust

select the original devic es in line with the provisions of the
manufacturer.

2

Inspection of all attachments

After unpacking the machine, please check it in accordance with
the packing list and confirm whether the attachments contained
are complete. The picture below shows a refer ence diagram of
the attachments, and various models are equipped with different
attachments and the detai ls of a packing list shall prevail.

The diagram and the diagrams of the components provided
below are schematic, and the physical appearance of all the
components shall prevail.

3