Hybrid Audio Technologies Imagine Series Subwoofer User Manual

Page 1
Imagine-Series Subwoofers
Installation Manual and User’s Reference
1240 Oak Industrial Lane Cumming Georgia 30041 United States
(T) +1 770 888 8200 (F) +1 888 886 4605
hybrid-audio.com
Page 2
Contents
Preliminaries
01
02
03
Pages 4-7 Introduction, History, Attributes, and Summary.
Specications & Parameters
Pages 8-11
Mechanical Drawings
Pages 12-15
Warranty
04
2
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.82002 3
Page 16-17
3
Page 3
Welcome and Introduction
Congratulations on your Imagine
Subwoofer
purchase, and welcome to the world of Hybrid Audio Technologies!
We realize that you have a choice in loudspeakers, and are thrilled that you have chosen the Imagine-series subwoofer drivers. For more information about Hybrid Audio Technologies, our philosophies regarding high-end mobile audio, to learn more about our lifetime guaranteed value program, and for information about our other products, please visit us at hybrid-audio. com
by Scott Buwalda - Founder
Speaker development is our passion! When installed and set-up properly, the Imagine Subwoofer you have purchased will make a remarkable improvement in the sound quality of virtually any mobile audio sound system and give years of superior performance.
With the publication of this manual, it is our goal to assist the “do it yourself” enthusiast and professional installer alike in getting the highest level of performance out of the Imagine subwoofer drivers using straight-forward installation advice.
Thank you, and happy listening!
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.82004 5
5
Page 4
The Imagine Subwoofer
A Brief History
The Imagine I6SW was the rst subwoofer ever oered by Hybrid Audio Technologies. Originally designed to suit saddle-bag installations on touring motorcycles, the ecacy of the design was quickly proven in a wide variety of installations in virtually any automobile, where a small enclosure subwoofer could be used where space was at a premium.
In Spring 2009, the rst I6SW prototypes were developed by company founder and lead designer Scott Buwalda, and the concept of an Imagine subwoofer line-up was born.
All the while the I6SW had been developed and launched to an enthusiastic reception of enthusiasts, custom installers, and motorcycle and ATV riders, we were working on the larger counterparts to the Imagine I6SW, the 8-inch Imagine I8SW and the 10-inch I10SW. In January 2011, nal prototypes were approved for production after a long and strenuous program of evaluation by several Hybrid Audio specialty retail dealers for their use and assessment in the eld. The combined eorts of our dealers and our own R&D team armed the design concept for a budget-friendly high-end sound quality subwoofer, and the I8SW and I10SW product was commenced. Production began in August 2011, and was completed in October 2011, after an in-process change was made to the reverse-roll surround to ensure reliability and longevity operation. The Imagine I8SW and I10SW were launched in late November 2011.
In September 2013, the Imagine subwoofer line-up was deemed complete with the long-anticipated Imagine 12-inch oering, named the Imagine I12SW-V2, or version 2, as the Imagine subwoofer line-up now enters its Version 2 phase to include the Imagine I6SW-V2 (the Imagine I8SW and Imagine I10SW remain the most-current 8-inch and 10-inch subwoofer models in this line-up, respectively). The Imagine I12SW-V2 was the subject of a considerable level of prototyping and real-world testing to conclude on a design that incorporates exceptional output and power handling, but also low distortion, moving mass, and inductance. Likewise, the V2 version of the widely-acclaimed Imagine I6SW
incorporates several mechanical enhancements, making the driver more amenable to a wider variety of enclosure designs
Attributes
Basket/Frame
The basket of the I6SW-V2, I8SW, I10SW, and I12SW-V2 is a stamped steel design with semi-gloss black powder coating. The frame includes spider venting for improved thermal power handling. The frame includes reverse-roll surround tooling proprietary to Hybrid Audio Technologies, allowing for close-tolerance ush and iso-mounting for easy grille clearance and locational clearance (such as underneath a seat, in a touring motorcycle saddle bag, or in a center console enclosure).
Motor and Voice Coil
The motore of the Imagine subwoofer is conventional dynamic with a large, high-grade ferrite magnet assembly with bumped and vented pole piece. The voice coil diameter for the four subwoofers is 51mm (2-inch) for elevated power handling, dissipation of heat (thereby lowering power compression), and maximizing the size of the magnet around the voice coil for enhanced motor compliance. The voice coil is a four-layer, high-purity aluminum, which is superior to copper for heat dissipation, as well as signicantly reduced moving mass. The result is an extremely light weight winding, with low inductance and good power handling.
Suspension, Cone, Tinsel Leads & Terminals
The inverted surround is butyl rubber which is highly consistent, and does not suer the variance
of natural rubbers. This rubber surround terminates mechanical vibrations well, having a low stiness for positive damping of resonances. The spider material was chosen for optimal performance; the spider is a 90/10 cotton/Nomex blend with single-dip low viscosity phenolic. This material provides the stiness desired without being overly brittle or sti, where vibrations in the spider are well damped and do not translate into the former or the cone.
The Imagine subwoofers are cone-type drivers consisting of a polypropylene diaphragm with low moving mass. Polypropylene provides a good balance of strength, moving mass, and water resistance, in the event the Imagine subwoofers are used in all-weather climates, such as motorcycle, ATV, golf cart, and marine uses. The tinsel leads are bonded directly to the former and brought out to the terminals, which keeps tinsel lead slap to a minimum and does not compromise the structural integrity of the cone. The Imagine subwoofer comes equipped with heavy-duty PCB-mounted male blade-type terminals on the Imagine I8SW and I10SW, and nickel-plated push terminals on the I6SW-V2 and I12SW-V2, and give the end user exibility in tinned wire or crimp terminal terminations.
Summary
The Imagine subwoofers are the ideal multi-purpose sound quality subwoofer speaker driver. Mechanical and electrical parameters are amenable to a variety of vented and sealed enclosures. At home in virtually any arrangement, the Imagine subwoofer is Hybrid Audio’s Stage II subwoofer, boasting exceptional performance and a high-delity design philosophy.
6
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
7
Page 5
Imagine Subwoofers
Specications & Parameters
Overall Diameter φ168 mm
Mounting Depth 85 mm 102 mm 130 mm 127 mm
Bolt Circle Diameter φ160 mm φ192 mm φ248 mm φ294 mm
Mounting Hole φ148 mm φ184 mm φ235 mm φ283 mm
Pnom Rated Power Input (AES Standard) 125 watts 150 watts 175 watts 225 watts
Pmax Rated Power Input (AES Standard) 250 watts 300 watts 350 watts 450 watts
Frequency Response (+/- 3dB) 32 - 800 Hz 30 - 800 Hz 28 - 800 Hz 27 - 1000 Hz
Eciency 2.83V/1 meter 88.6 dB 90 dB 91 dB 91.5 dB
Mms 56.6 g 63.5 g 88.5 g 171 g
Cms 308.9 um/N 310 um/N 285 um/N 202 um/N
BL (T*m) 17.681 13.3 13.6 16.4
Voice Coil Diameter 50 mm (2-inch) 50 mm (2-inch) 50 mm (2-inch) 50 mm (2-inch)
Impedance 4 Ω 4 Ω 4 Ω 4 Ω
DC Resistance 3.9 Ω 3.8 Ω 3.6 Ω 3.6 Ω
Fs (Free Air) 38 Hz 35 Hz 30 Hz 27 Hz
Qms 8.077 5.5 5.65 7.0
I6SW-V2 I8SW I10SW I12SW-V2
(6.6-inch)
φ206 mm
(8.1-inch)
φ256 mm
(10-inch)
φ309.5 mm
(10.77-inch)
† Typically, in-car response including
vehicular “cabin gain”, or the gain
expected with subwoofer(s) installed in
the vehicle, will result in an extended
subbass response. This is a result of
these frequencies being below the
lowest resonance in the vehicle (typically
around 50-70 Hz in most vehicles). In
more practical terms, install the Imagine
subwoofer(s) into your vehicle and
you will see a dramatic improvement
in subbass and midbass output, much
more so than just simply listening to the
Qes 0.169 0.29 0.34 0.39
Qts 0.165 0.27 0.32 0.37
Xmax (Two Way) 12 mm 16 mm 18 mm 24 mm
Vas 7.263 L 18.5 L 49.5 L 71 L
Le 1.42 mH 1.52 mH 1.48 mH 1.56 mH
Sd 12,868 mm
8
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
2
20,612 mm
2
34,636 mm
2
49,876 mm
Imagine in a large room, or worse yet,
“free air” (we don’t recommend even
trying the Imagine subwoofers in “free
air” without some form of recommended
2
enclosure).
9
Page 6
Imagine Subwoofers
Enclosure Recommendations
Trunk SUV / Hatch/ Wagon
I6SW-V2
I8SW
I10SW
I12SW-V2
Vb
Av
Lv
Vb
Av
Lv
Vb
Av
Lv
Vb
Av
Lv
Vented Sealed Vented Sealed
6.00 liter
5.06 cm^2
20.00 cm
18.00 liter
20.25 cm^2
25.00 cm
24.00 liter
20.25 cm^2
21.00 cm
48.00 liter
45.57 cm^2
23.00 cm
8 liter 8.00 liter
5.06 cm^2
15.00 cm
18 liter 22.00 liter
20.25 cm^2
21.00 cm
22 liter 38.00 liter
45.57 cm^2
25.00 cm
39 liter 52.00 liter
45.57 cm^2
18.00 cm
10 liter
21 liter
26 liter
42 liter
The user is encouraged to determine if the application most replicates that of a “trunk” or “boot” installation, or an installation in an SUV, hatchback, or wagon.
Vb = Volume of box Av = Area of vent Lv = Length of vent
10
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
11
Page 7
Imagine I6SW-V2
Imagine I8SW
Mechanical Drawing
Mechanical Drawing
12
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
13
Page 8
Imagine I10SW
Imagine I12SW
Mechanical Drawing
Mechanical Drawing
14
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
15
Page 9
Imagine
Hybrid Audio Technologies extends a limited one year warranty to the original purchaser
This warranty does not cover any defects or
Thank You!
costs caused by: (1) modication, alteration,
Subwoofer
Warranty
when self-installed, and three years warranty when installed by a certied Hybrid Audio Technologies dealer (United States only), and hereby certies that this product will be free from defects in materials and workmanship under normal and proper use for one year from the date of purchase.
Hybrid Audio Technologies’ responsibility under this warranty is limited to replacing or repairing, at Hybrid Audio Technologies’ option, products or parts determined by Hybrid Audio Technologies to be defective either in materials, or workmanship. To attain warranty service, the customer must deliver the product or the defective part(s), appropriately packed with proof of purchase date, to an authorized Hybrid
repair or service of this product by any persons or company other than Hybrid Audio Technologies; (2) physical abuse to, overload of, or misuse of, the product or operation thereof in a manner inconsistent with the use indicated in the instructions; (3) any use of the product other than that for which it was intended; or (4) shipment of the product to Hybrid Audio Technologies for service. This warranty does not cover labor costs.
Hybrid Audio Technologies is not liable for any special incidental or consequential damages, including, but not limited to, personal injury, property damage, damage to or loss of equipment, loss of prots or revenue, costs of renting or buying
Hybrid Audio Technologies is delighted that you have chosen an Imagine component system for your high-end mobile audio sound system. We are convinced that a great product oering, backed up with unsurpassed customer service and technical support will advance the Hybrid Audio Technologies namesake in the coming years. We are pleased that you have joined us in our “new generation of in-car audio.”
Audio Technologies dealer. In the event that a direct return from a consumer is required, the consumer must obtain from Hybrid Audio Technologies a return authorization number, and ship the defective product directly to Hybrid Audio Technologies. All shipping expenses are the customer’s responsibility. If the product has been updated or superseded, a replacement will be made with a current model of the same quality and function. Warranty of the replacement parts is limited to 90 days or the unexpired portion of the warranty period of the product on which the parts are being used, whichever is longer.
replacements and/or any other additional expenses, even if Hybrid Audio Technologies has been informed of the prospect of such damages. Any express warranty not provided herein, and any remedy which other than the warranty contained herein might arise by inference or operation of law, is hereby excluded and disclaimed including the implied warranties of merchantability and of the tness for a particular purpose
.
If there is anything we can do to help you get the most out of your Imagine installation, please do not hesitate to email us at: support@hybrid-audio.com, by phone: 770.888.8200, or by visiting us at: hybrid-audio.com
16
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200
17
Page 10
1240 Oak Industrial Lane Cumming Georgia 30041 United States
(T) +1 770 888 8200 (F) + 1 888 886 4605
hybrid-audio.com
Loading...