Manual
A. Bluetooth mode
1. Bluetooth Version: Bluetooth 2.1 + EDR compliant, supports HSP, HFP, A2DP,
AVRCP protocol, with English voice prompts, Bluetooth device name for LP-04
2. Long press the power button to boot, the boot Bluetooth Bluetooth LED blue
lights turned on, the speaker issued a voice prompt
3. Blue lights flash to 100ms pairing status, mobile search to LP-04 device name to
confirm the connection, and if the password is entered (0000), connect the blue light
emitted speaker voice prompts After the success of the process of music playing in the
blue light to 1000ms slow flash. Paired Bluetooth cell phone to turn on the phone and
then turn back speakers are automatically linked
4. During playback, press the "Volume - / previous song" on or "Volume + / next
track" button control, the next song, press the "Volume - / on the song" or "Volume + /
next track" button control volume reduction, plus
5. During playback, press "Play Pause / Mode" button to control play / pause
function, long press "Play Pause / Mode" button to enter the mode switch
6. During playback, there is an incoming call, press "Call" to answer the call, the
call ends short press to hang up. Double-click the "Phone" button to automatically
play back the last outgoing number, long forced to disconnect the current device is
connected press the "call" button and enter the Bluetooth search status
B. TF card mode
1. When the speaker is not inserted TF card device, press the power button to boot
into Bluetooth mode, insert TF card speaker TF card automatically detects and enters
TF card mode. If the speaker has inserted TF card device, boot directly into the TF
card mode
2. During playback, the blue indicator light flashes slowly to 1000ms, pause blue
light
3. During playback, press the "Volume - / previous song" on or "Volume + / next
track" button control, the next song, press the "Volume - / on the song" or "Volume + /
next track" button control volume reduction, plus
4. During playback, press "Play Pause / Mode" button to control play / pause
function, long press "Play Pause / Mode" to enter the mode switch
C. Radio mode
1. Press the Mode button to enter the radio mode, radio frequency is 87.5 ~
108.0MHZ
2. Under radio mode into the USB charging cable, or 3.5 stereo audio cable when an
external antenna
3. Press "Play Pause / Mode" key auto search, auto-save after completion of the
radio station search and enter the first channel playback, long press "Play Pause /
Mode" button to enter the mode switch
4. During playback, press the "Volume - / on the song" or "Volume + / next track"
button control on a radio or next radio, long press the "Volume - / on the song" or
"Volume + / next song "buttons control the volume reduction, plus
5. Automatic station search lights flash blue lights to 100ms, play blue light
D. AUX mode
1. The 3.5MM AUX audio cable into the speaker jack, the speaker will
automatically detect enter AUX mode, plug the other end of the phone or computer
3.5MM
2. Under the AUX mode indicator slowly flashing blue lights to 2000ms
E. Charging
1. Plug the USB cable into the charger or computer speakers connected to 5V on the
speakers built-in battery;
2. When charging, "Charging" light red and green light, red light off after the full;
F. Standby function
1. No more than 10 minutes after connecting speakers will automatically enter
standby mode Bluetooth mode, press any key to wake up
2. Bluetooth mode has a connection but does not play music or do not have to call
more than 10 minutes after the speakers will automatically enter standby mode, press
any key or cell phone to play music or phone calls to electricity may have to wake
Speaker
3. TF card and AUX mode under suspended more than 10 minutes after the speakers
will automatically enter standby mode, press any key to wake up
G. All modes native default boot volume of two-thirds of the total volume. To
protect the battery life and speaker working properly, the software when the battery
voltage is lower than 3.3V setting the speaker will automatically detect and send voice
alarm, speakers will be issued when the battery voltage is lower than 3.2V voice
prompts and set automatic shutdown
H. List of key features
1. The machine open, shut down the control key with the touch of a button, the other
four buttons with capacitive touch button control. Long press on, off key on, off,
every time you press the touch buttons corresponding to the touch LED flashes once
Mode Serial
number
Key Name
Bluetooth TF card FM AUX
1
Play Pause
/ mode
Short press the
play / pause,
long press the
mode switch
Short press the
play / pause,
long press the
mode switch
Short press
automatic station
search, press the
mode switch
Short press the
play / pause,
long press the
mode switch
2 Phone
Short press the
answer, hang
up, double-click
automatic
callback, press
disconnect the
device
Invalid Invalid Invalid
3
Vo l u m e - /
on a
On a short
press, long press
volume down
On a short
press, long press
volume down
Short press on a
store radio, long
press volume
down
Press invalid,
long press
volume down
4
Vo l u m e + /
under a
A short press,
long press the
volume increase
A short press,
long press the
volume increase
Short pressing a
store radio, long
press volume up
Press invalid,
long press the
volume increase
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
Shenzhen Hwell Technology Co.,Ltd may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
Loading...