Hussmann SI2E Specifications

®

SI2E

Technical Data Sheet

P/N 0510792_B

NSF

®

Certified

April 2010

Item Part # Description Wiring Item #

FAN ASSEMBLIES AND THERMOSTATS
10 Ft

A. 12W Standard Fan Assembly (1)

0047000 Fan Motor, Evaporator

(MO.4410103)

0141070 Fan Blade (FB.0141070)

embossing toward motor

B. Optional Adjustable Refrigeration Thermostat (2)

0448347 (CT.4481631)

Item Part # Description Wiring Item #

HEATERS

C. Anti-Sweat Heater (3)

0487124 10 ft (HE.4851035)
0487125 10 ft (HE.4851036)

L

AMPS AND BALLASTS

D. Ballast, Electronic (4)

0355398 3 Lamps (BA.4480118)
0355716 2 Lamps (BA.0355716)
0447739 (BA.4480900)

E. Fluorescent Lamp (5)

Replace with like fixtures

©2010 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM

P/N0510792B

We reserve the right to change or revise specifications
and product design in connection with any feature of
our products. Such changes do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for equipment previously sold or shipped.

Note: Revision B updates electrical data on page 4 and updates anti-sweat electrical schematic on page 6.

E

C

E

B

D

A

Serial Plate

10 ft

General

(A) Overall Case Length 120 (3048)
(B) Base Length 110 1/2 (2807)

Maximum O/S dimension of case back to front

(includes bumper) 72 (1829)
Front of splashguard to O/S edge of front base rail 1 5/8 (41)
Front of case to O/S edge of front base rail 13 1/8 (333)
Back of case to O/S edge of front base rail 58 7/

8 (1495)

Width of base rail 1

7

/8 (48)

(D) Length of Canopy 93 1/8 (2365)

Width of Canopy 18 1/

8 (460)

Electrical Service (Electrical Field Wiring connection point)

Center of Electrical service to O/S edge of front base rail 47 (1194)
Left end of case to center of field connection box 27 (686)
Right end of case to center of field connection box 93 (2362)

Waste Outlets

(C) LH End of case to the center of waste outlet 96 (2438)

Center of front waste outlet to outside of front base rail 8

7

/

8 (225)

Center of back waste outlet to outside of front base rail 40

1

/8 (1019)

Schedule 40 PVC drip pipe 1 1/2 (38)

Refrigeration Outlet

LH end of case to center of refrigeration outlet 22 (559)
RH end of case to center of refrigeration outlet 98 (2489)

2 of 7

SI2E Technical Data Sheet

U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900

Engineering

Plan Views

08-2009

Front

Dimensions shown as inches and (mm).

SI2E Island

PHYSICAL DATA

Merchandiser Drip Pipe (in.) 1 1/2
Merchandiser Liquid Line (in.)

3

/8

Merchandiser Suction Line (in.)

5

/8

47

(1194)

Serial

Plate

7

(178)

32 1/2

(826)

27

(686)

22

(559)

C

Field Connection
Electrical Box

Refrigeration
Outlets

Canopy

A

Waste

Outlets

18 1/8

(460)

(1829)

31 1/4

(794)

11 1/2

(292)

D

9 1/2

(241)

B

20 3/8

(518)

72

3 of 7P/N 0510792_B

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM

Dimensions shown as inches and (mm).

REFRIGERATION DATA

Note: This data is based on store temperature

and humidity that does not exceed 75°F and
55% R.H.

SI2E

Discharge Air (°F) 27

Evaporator (°F) 20

Unit Sizing (°F) 18

Btu/hr/ft

L

IT & UNLIT SHELVES SI2E

Parallel 1444

Conventional 1575

DEFROST DATA

SI2E

Frequency (hr) 4

Defrost Water (lb/ft/day) 12

(± 15% based on case configuration and

product loading).

OFFTIME SI2E

Time Terminated (minutes ) 20

ELECTRIC OR GAS Not Recommended

CONVENTIONAL CONTROLS

Low Pressure Backup Control

SI2E

CI/CO* 14°F / 4°F

Indoor Unit Only, Pressure Defrost

Termination* 48°F

*Use a Temperature Pressure Chart to deter­mine PSIG conversions.

Estimated Charge ** SI2E

10 ft 2.10 lb 34 oz 1.0 kg

**This is an average for all refrigerant types.
Actual refrigerant charge may vary by approxi­mately half a pound.

Multi-deck Island, 3 Display Levels

SI2E

SI2E

Delicatessen

Load Limit Profile

Air flow between the shelves, from the Center Air Discharge (CAD) to the return, must be
maintained at all times for optimum operating efficiency and to prolong product shelf life.
At no time should merchandisers be stocked beyond the load limits indicated.

Cases may not function properly if they are loaded above load limits.

NSF Certification

This merchandiser model is manufactured to meet ANSI/NSF (National Sanitation
Foundation) Standard #7 requirements for construction, materials & cleanability.

Standard Height Plex

7

5

/8 (149)

1

3

/4 (83)

23

(607)

and Product Stop

3 (76)

7

/8

1

11

/2

(292)

1

21

27 (686)

/2 (546)

1

18

/8

(460)

49 (1245)

72 (1829)

12

(305)

8 (203)

Optional High Plex

6 (152)

and Product Stop

8

1

11

/2

(292)

7

/8 (225)

27

(689)

1

55

/8

(1416)

3

/4

Optional Shelves

CAD

Load Limit

Optional High Plex
with 6 in. (152 mm)
Product Depth

Load Limit

SI2E