Hussmann RM Innovator Specifications

E

C

B

A

D

G

F

Merchandisers

®

Item Part # Description Wiring Item #

FAN ASSEMBLIES, AND THERMOSTATS

A. 12W Standard Fan Assembly (1)

0047000 Fan Motor, Evaporator

(MO.4410103)

0461805 Fan Blade (FB.4780446)
12W Optional Energy Efficient Fan Assembly (1)
0477655 Fan Motor, Evaporator

(MO.4410546)

0461805 Fan Blade (FB.4780446)

B. Optional Adjustable (2)

Refrigeration Thermostat

CONTROL (RMF ONLY)

C. Fan Control (RMF) (3)

0125275 Fan Speed Control,

120V, 60hz (CT.4440734)

Item Part # Description Wiring Item #

LAMPS. BALLASTS, LED FIXTURES AND POWER SUPPLY

D. 0489698 2 Lamp Ballast (BA.4481596)

0489699 3 Lamp Ballast (BA.4481739)
0424649 Export Ballast (BA.0424649)

E. Standard Fluorescent Lamp

Replace with like fixtures

F. 0499399 LED Power Supply (EP.4481668)

G. LED Fixture

Replace with like fixtures

NOTE: For LED lighting parts contact your Hussmann
service representative at 1-800-922-1919. Please have
your model and serial number available.

RM with INNOVATOR Doors

Technical Data Sheet

P/N 0425645_L

NSF

®

Certified

November 2009

Warning:

Terminal block NOT for

case-to-case

wire connection!

We reserve the right to change
or revise specifications and
product design in connection
with any feature of our
products. Such changes
do not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for equipment
previously sold or shipped.

©2009 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM

NOTE: Revision L updates Btu note, page 3.

P/N0425645L

Refer to I

NNOVATOR REACH-IN GLASS DOOR

I

NSTALLATION AND SERVICE

manual, P/N 0425683,
for Innovator and Innovator II door and frame
replacement parts.

RM with Innovator Doors Technical Data Sheet

2 of 6

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

1 Dr 2 Dr 3 Dr 4 Dr 5 Dr

General

(A) Case Length (without ends or partitions) 31 1/2 (800) 62 (1575) 92 1/2 (2350) 122 7/8 (3121) 153 3/8 (3896)

(Each end adds 2 in. (51 mm) to length of lineup; each insulated partition adds 1 1/2 in. (38 mm).

Maximum O/S dimension of case back to front 43 3/4 (1111) 43 3/4 (1111) 43 3/4 (1111) 43 3/4 (1111) 43 3/4 (1111)

(Includes bumper. Add 26 1/2 in. (673 mm) for door swing.)

Back of case to rear of splashguard 39 7/8 (1013) 39 7/8 (1013) 39 7/8 (1013) 39 7/8 (1013) 39 7/8 (1013)

Width of Skidrail 3 3/4 (95) 3 3/4 (95) 3 3/4 (95) 3 3/4 (95) 3 3/4 (95)

Width of Bottom Front Support 6 (152) 6 (152) 6 (152) 6 (152) 6 (152)

Stub-up area between front support and splashguard 3 1/8 (79) 3 1/8 (79) 3 1/8 (79) 3 1/8 (79) 3 1/8 (79)

Electrical Service

RH end of case to the center of nearest knockout 4 (102) 4 (102) 4 (102) 4 (102) 4 (102)

RH end of case to the center of LH knockout 27 1/2 (698) 58 (1473) 88 1/2 (2248) 118 7/8 (3019) 149 3/8 (3794)

Back O/S of case to center of knockout 41 5/8 (1058) 41 5/8 (1058) 41 5/8 (1058) 41 5/8 (1058) 41 5/8 (1058)

* NOTE: Electrical Field Wiring Connection Point is at terminal.

Waste Outlet

(B) Right end of case to center of waste outlet 15 3/4 (400) 23 7/8 (606) 54 1/4 (1378) 46 1/4 (1175) 76 5/8 (1946)

Back O/S of case to center of waste outlet 34 5/8 (879) 34 5/8 (879) 34 5/8 (879) 34 5/8 (879) 34 5/8 (879)

Water Seal

Edge of water seal to center of waste outlet 11 (279) 13 (330) 13 (330) 13 (330) 13 (330)

Schedule 40 PVC drip pipe 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/4 (32)

** NOTE: Field installed water seal outlets, tees, and connectors are shipped with case

Refrigeration Outlet

RH end of case to center of RH refrigeration outlet 5 3/

8 (137) 5

3

/

8 (137) 5

3

/

8 (137) 5

3

/

8 (137) 5

3

/

8 (137)

Back O/S of case to center of refrigeration outlet 32 (813) 32 (813) 32 (813) 32 (813) 32 (813)

Outside bottom front supports from end of case 6

3

/

4 (170) 6

3

/

4 (170) 6

3

/

4 (170) 6

3

/

4 (170) 6

3

/

4 (170)

Center bottom front support from Centerline NA 24 (610) 24 (610) 24 (610) 24 (610)

Distance between Center and Outside supports will vary

4

(102)

43

3

/4

(1111)

Front

5-Door Shown

6

(152)

34

5

/8

(879)

32

(813)

5

5

/8

(143)

41

5

/8

(1057)

Refrig. Outlet

A

B

Electrical Wireway

Bottom
Front
Support

48

(1219)

Waste Outlet

Relay & Terminal

Block Location

Skid/
External
Base

13/4

(44)

13/4

(44)

7

(178)

4

(102)

Splashguard

Clearance for Door Swing

26

1

/2

(673)

70

1

/4

(1784)

Dimensions shown as in. & (mm).

Reach-In

2, 3, 4 & 5 Door

Engineering

Plan Views

PHYSICAL DATA

Merchandiser Drip Pipe (in.) 1 1/4
Merchandiser Liquid Line (in.)

3

/8

Merchandiser Suction Line (in.)

7

/8

RL - RM - RMF

Plan View

07-2008

REFRIGERATION DATA

Note: This data is based on store temperature and

humidity levels that do not exceed NSF guidelines.

MEDIUM TEMP

Discharge Air °F 32

Evaporator °F 27

Unit Sizing °F 25

NSF NSF

BTU/HR

/DOOR TYPE IT

YPE II

Temp (°F) /R.H. 75°/ 55% 80°/ 55%

Parallel 850 890

Conventional 890 930

*Optional LED lighting reduces refrigeration
load by 100 Btu

/hr/Door.
Optional Energy Efficient Fan motors reduce
refrigeration load by 109 Btu/hr/Door.

DEFROST DATA

Frequency (hr) 24
Defrost Water (lb/Dr/day) 0.36
(± 15% based on case configuration and

product loading.)

E

LECTRIC

NA

Temp Term (°F) NA
Failsafe (minutes) NA

G

AS Not Recommended

O

FFTIME

60 minutes

CONVENTIONAL CONTROLS

Low Pressure Backup Control
CI/CO (Temp °F)* +20°/ +10°

Indoor Unit Only, Pressure Defrost
Termination (Temp °F)*

Not Recommended

*Use a Temperature Pressure Chart to
determine PSIG conversions.

Estimated Charge (lb)**

2Dr 1.8 4Dr 3.6
3Dr 2.7 5Dr 4.6

**This is an average for all refrigerant types.
Actual refrigerant charge may vary by
approximately half a pound.

Length Added to Lineup by each

Standard End (in.) 2
Optional End with Window (in.) 1

1

/2

Optional Partition (in.) 1 1/2

4 3/4

(121)

32 (813)

34 5/8 (879)

2 5/8

(67)

2

1

/8

(54)

Fan

Coil

62 1/2

(1588)

22 Shelf

(559)

41

(1041)

27 7/8 (708)

Refrigeration Outlet

67

(1702)
Frame

65 1/2

(1664)

Door

83

(2108)

82 1/4

(2089)

6

1

/4

(159)

13 1/8

(333)

Frame

41 7/8 (1064)

43 3/4 (1111 )

3 1/2

(89)

Dimensions shown as in. & (mm).

Reach-in 2, 3, 4 and 5 Door Models

Impact RM

With INNOVATOR Doors

Dairy, Deli, Beverages

3 of 6P/N 0425645_L

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM

NSF Certification

This merchandiser model is manufactured to meet ANSI/NSF
(National Sanitation Foundation) Standard #7 requirements for
construction, materials & cleanability.

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

RM with Innovator Doors Technical Data Sheet

4 of 6

Impact RM

With INNOVATOR Doors

Dairy, Deli, Beverages

Hussmann recommends against frame heater cycling with

Innovator

doors to prevent door seals from freezing to the

frames and tearing.

Electrical Data

Number of Fans—12W 1 2 3 4 5

Amperes Watts

Merchandiser 1Dr 2Dr 3Dr 4Dr 5Dr 1Dr 2Dr 3Dr 4Dr 5Dr

Evaporator Fan

120V 60Hz Standard 0.65 1.30 1.95 2.60 3.25 50 100 150 200 250

120V 50Hz Standard 0.75 1.50 2.25 3.00 3.75 57 114 171 228 285

220V 60Hz Export NA 0.66 0.99 1.32 1.65 NA 100 150 200 250

220V 50Hz Export NA 0.76 1.14 1.52 1.90 NA 114 171 228 285

120V 60Hz Energy Efficient 0.30 0.60 0.90 1.20 1.50 18 36 54 72 90

220V 60Hz Energy Efficient NA 0.30 0.45 0.60 0.75 NA 36 54 72 90

Door Anti-sweat Heaters (on fan circuit) NA

Frame Anti-sweat Heaters (on fan circuit)

120V 50/60Hz Standard 0.89 1.34 1.79 2.24 107 161 215 269

220V 50/60Hz Export 0.49 0.73 0.98 1.22 107 161 215 269

Minimum Circuit Ampacity

120V 60Hz Standard 2.39 3.49 4.59 5.69

120V 50Hz Standard 2.59 3.79 4.99 6.19

220V 60Hz Export 1.35 1.92 2.50 3.07

220V 50Hz Export 1.45 2.07 2.70 3.32

120V 60Hz Energy Efficient 1.69 2.44 3.19 3.94

220V 60Hz Energy Efficient 0.99 1.38 1.78 2.17

Maximum Over Current Protection 120V 20 20 20 20 20
Maximum Over Current Protection 220V 15 15 15 15 15

Defrost NA

Standard Vertical Lighting 1Dr 2Dr 3Dr 4Dr 5Dr 1Dr 2Dr 3Dr 4Dr 5Dr

Innovator* Doors (120V) 1.00 1.50 2.00 2.50 3.00 120 180 240 300 360

(Export: 220V 50 hz) NA 0.84 1.12 1.40 1.68 NA 185 246 308 370

Optional LED Lighting

Hussmann EcoShine™ [27 W] (120V) 0.23 0.45 0.68 0.90 1.13 27 54 81 108 135
Hussmann EcoShine™

[27 W] [220V Export)] 0.12 0.25 0.37 0.49 0.61 27 54 81 108 135

Hussmann EcoShine™ EP [16 W] (120V) 0.13 0.27 0.40 0.53 0.67 16 32 48 64 80
Hussmann EcoShine™ EP

[16 W] [220V Exp)] 0.07 0.15 0.22 0.29 0.36 16 32 48 64 80

Hussmann EcoShine™ [20 W] (120V) 0.17 0.33 0.50 0.67 0.83 20 40 60 80 100
Hussmann EcoShine™

[20 W] [220V Export)] 0.08 0.17 0.25 0.33 0.42 20 40 60 80 100

Gelcore

(120V) 0.24 0.48 0.73 0.97 1.21 29 58 87 116 145

Gelcore

(120V) [220V (Export)] 0.13 0.26 0.40 0.53 0.66 29 58 87 116 145

* Innovator or Innovator II

5 of 6P/N 0425645_L

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM

ESTIMATED SHIPPING WEIGHT

4

Case Solid End

1 Dr 2 Dr 3 Dr 4 Dr 5 Dr (each)

lb (kg) 617 (280) 997 (453) 1295 (589) 1595 (725) 1874 (852) 55 (25)

4

Actual weights will vary according to optional kits included.

Impact RM

With INNOVATOR Doors

Dairy, Deli, Beverages

Product Data

Recommended Usable Cube

1

(Cu Ft/Dr) 23.46 ft3 /Dr (0.66 m3 /Dr)

ARI Total Display Area

2

(Sq Ft/Dr) 13.31 ft2/Dr (1.24 m2 /Dr)

Shelf Area 3(Sq Ft/Dr) 29.32 ft2/Dr (2.72 m2 /Dr)

1

ARI Refrigerated Volume less shelving and other unusable space: Refrigerated Volume/Unit of Length, ft3/ft [m3/m]

2

Computed using ARI 1200 standard methodology: Total Display Area, ft2[m2]/Unit of Length, ft [m]

3

Shelf surface area is composed of bottom deck plus standard shelf complement, as shown in the Hussmann
Product Reference Guide. The standard shelf complement for this model is (5) rows of 22-inch shelves.

RM with Innovator Doors Technical Data Sheet

6 of 6

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

BK

Refer to Innovator Reach-In

Glass Door, Installation and
Service manual, P/N 0425683,

for Innovator door and frame
replacement parts.

1

120V POWER

120V NEUTRAL

2P

Evaporator

Fans

26

2P

Frame Heaters

14

21

Offtime Defrost (standard)

Medium Temperature

3

BR

12

R

RMF &

RMNF Only

Fan Speed

Control

15 23

Terminal Blocks in Raceway

20

21

22

26

17

11 14

LIGHTS

(120V)

Refrigeration

Thermostat

(Optional)

Pink

2

}

To
Condensing
Unit

12

FANS & A.S.

(120V)

LIGHTS

(Neutral)

FANS & A.S.

(Neutral)

PBRORPOR

Removable External

Jumpers

120V POWER

NEUTRAL

Medium Temperature with

Offtime Defrost

20

OR

Switch

17

BR

OR

BR

11 22

CIRCLED NUMBERS = PARTS LIST ITEM NUMBERS

THESE ARE MARKER COLORS (WIRE MAY VARY.)

R = Red P = Purple 2P = Purple (2 Bands) DB = Dark Blue BL = Black

LB = Light Blue Pink = Pink BR =Brown Y =Yellow OR = Orange W = White