Hussmann R3HV- MF Specifications

7

Specialty Products

R3HV-M/F

These merchandisers are manufactu red t o meet ANSI/N ational Sanitat i on
Foundation Standard #7 requirements.

We reserve the right to change or revise specifications and
product design in connection with any feature of our
products. Such changes do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for equipment previously sold or shipped.

ETL Listed

40427

R3HV-M/F

Technical Data Sheet

Rev C

REFRIGERATION DATA

Note: This data is based on store temperature and
humidity that does not exceed 75F and 55% R.H.

Discharge Air (F) 24
Evaporator (F) 20

Note: Not recommended to control temp by regulating
coil temp allow t-stat to cycle and control temp.

Btu/hr/ft*
Parallel 650

Conventional 748

Parallel 565

Conventional 650

*For all refrigeration equipment other than Hussmann,
use conventional Btu values.

Frequency Hrs 6

OFFTIME
Temp Term °F 54
Failsafe Minutes 40

ELECTRIC or GAS Not Recommended

Merchandiser Drip Pipe (in.) 1 ½*
Merchandiser Liquid Line (in.) 3/8*
Merchandiser Suction Line (in.) 5/8*

Estimated Charge (lb)***

4ft 1.2
5ft 1.5
6ft 1.8

*Dependent on case length and refrigerant type.

*** This is an average for all refrigerants types. Actual
refrigerant charge may vary by approximately half a
pound.

GLYCOL REQUIREMENTS

GPM PSI
NA NA
NA NA
NA NA

Front

Top

DEFROST DATA

PHYSICAL DATA

ETL Sanitation

40427

1 of 7

7

Specialty Products

R3HV-M/F

Engineering

CROSS SECTION

R3HV-M/F

Technical Data Sheet

Rev C

2 of 7

7

Specialty Products

R3HV-M/F

Engineering

Plan View

R3HV-M/F

Technical Data Sheet

Rev C

R3M/F - HV HIGH VOLUME

4' 1H23786
6' 1H23787
8' 1H23788

12' 1H23789

3 of 7