Page 1
1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
P/N 0376451A
January 2006
8 ft 12 ft
1. 2 3 Mirror
2. 2 3 PVC Tape 1/4 x 1/2 x 48
3. 4 6 Lower Mirror Channel
4. 2 3 Top Retainer Assembly
5. 18 27 Screws 8 x 18 x
1
/2
6. 4 6 Bottom Mirror Clip
Multi-deck, Meat, Produce & Dairy
Mirror Kit
Instruction
Parts List
Item No. Quantity Description
Page 2
2
P/N 0376451A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Front of Mirror
3
B
efore beginning installation,
carefully unpack and inspect
the mirrors, making sure there
is no breakage or damage.
NOTE: For factory installation,
proceed to Step 5.
1
Add PVC Tape – 2 to the top
back of Mirror – 1.
2
Slide Lower Mirror Channel – 3
onto the bottom of mirror.
Back of Mirror
2
1
Page 3
3
P/N 0376451A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Multi-deck Meat, Produce, & Dairy
Mirror Kit
3
Using this illustration as a
guide, drill pilot holes at the
appropriate locations. Fasten
Top Retainer Assembly – 4
to the top interior panel
using
Screws – 5.
11
1
/411 1/411 1/411 1/4 1 1/21 1/2
Internal Top Panel
Side View
Rear of Case
Mirror Hole Locations
26 in. Mirror
20 in. Mirror
16 in. Mirror
12 in. Mirror
8 in. Mirror
Top Retainer Clip Assembly Locations
26 in. Mirror
20 in. Mirror
16 in. Mirror
12 in. Mirror
8 in. Mirror
Rear of Case
Top View
1
/8 in. Diameter Holes
Internal Top Panel
8
1
/2
10
1
/2
13
6
1
/2
4
1
/2
Top
Mirror
Clip
5
4
Installing Mirror Retainer Assembly
Page 4
4
Using the drawing shown as
a guide, drill pilot holes at
the appropriate locations.
Fasten Bottom Mirror Clip – 6
onto the internal upright
using Screws – 5.
4
P/N 0376451A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
pg
6
26 In. Mirror
20 In. Mirror
16 In. Mirror
12 In. Mirror
8 In. Mirror
Side View
Bottom Clip Mirror Locations
Top View
1 In.
1
/2 In.
Center Clip as shown
Drill
1
/8 In. Hole
7
/8
21 1/8
16 3/4
9 3/4
6 1/2
13 1/2
Installing Bottom Mirror Clip
Upright
5
6
Page 5
Note: For factory
installation, begin here:
5
Insert Mirror – 1 into the
Bottom Mirror Clip – 6 and
gently push toward back of
case until it meets the Top
Retainer Assembly – 4.
IMPORTANT: Check that all
mirror clips are in the upper
position before continuing.
6
Install Mirror – 1 into the To p
Mirror Clip – 6 and slide the
Mirror Clip OVER then DOWN
to hold the mirror in place.
5
P/N 0376451A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Multi-deck Meat, Produce, & Dairy
Mirror Kit
4
Push
6
1
Snap
Rivet
Installing Mirrors
Slides over
and down
Upright
5
5
5
Mirror Clip in
Top Position
4
6
2
1
Installing Mirror into Mirror Retainer Assembly
2
Snap
Rivet
6
Slide Over
and Down
1
Mirror Retainer Assembly
(with top mirror clip exploded)
Loading...