4 ft 6 ft 8 ft 12 ft
General
(A) Case Length (without ends or partitions) 48 1/
4 (1226) 72
3
/
8 (1838) 96
3
/
8 (2448) 144
1
/
2 (3670)
NOTE: Each end or insulated partition adds 1 inch to lineup.
Maximum O/S dimension back to front (with bumper) 46 1/8 (1172) 46 1/8 (1172) 46 1/8 (1172) 46 1/8 (1172)
Back of case to front of front panel 34 1/8 (867) 34 1/8 (867) 34 1/8 (867) 34 1/8 (867)
RH end of case to outside edge of external support 1 3/
8 (35) 1
3
/
8 (35) 1
3
/
8 (35) 1
3
/
8 (35)
Distance between edges of
external support and center support NA 28
1
/2 (724) 40 1/2 (1029) 40 1/2 (1029)
Distance between edges of center supports NA NA NA 43 7/
8 (1114)
Distance between edges of external supports 37 (940) NA NA NA
Electrical Service (Electrical Field Wiring connection point)
(C) Length of electrical wireway 34
1
/2 (876) 26 (660) 38 (965) 38 (965)
RH End of case to center of farthest knockout 12 1/4 (311) 12 1/4 (311) 12 1/4 (311) 12 1/4 (311)
Back of case to center of end knockout 5 1/4 (133) 5 1/4 (133) 5 1/4 (133) 5 1/4 (133)
(B) RH End of case to RH end of raceway 6 7/8 (175) 6 7/8 (175) 6 7/8 (175) 6 7/8 (175)
Waste Outlet
(D) RH End of case to the center of waste outlet 24 1/8 (613) 24 1/8 (613) 24 1/8 (613) 72 1/4 (1835)
LH End of case to the center of waste outlet 24 1/8 (613) 48 1/4 (1226) 72 1/4 (1835) 72 1/4 (1835)
Back O/S of case to center of waste outlet 27 1/8 (689) 27 1/8 (689) 27 1/8 (689) 27 1/8 (689)
Water Seal
Edge of water seal to center of waste outlet 4 (102) 4 (102) 4 (102) 4 (102)
Schedule 40 diameter of the drip pipe 1 1/2 (38) 1 1/2 (38) 1 1/2 (38) 1 1/2 (38)
(Field installed water seal outlets, tees, and connectors
are shipped with the merchandiser.)
Refrigeration Outlet
Back of case to center of refrigeration outlet 30 1/4 (768) 30 1/4 (768) 30 1/4 (768) 30 1/4 (768)
(E) RH end of case to center of refrigeration outlet 9 3/8 (238) 9 3/8 (238) 9 3/8 (238) 9 3/8 (238)
2 of 7 E1S Technical Data Sheet
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900
Engineering
Plan Views
Dimensions shown as inches and (mm).
04-2010