Hussmann DD6X-ULP Specifications

GD
A
CE
FD
B
Field Connection
Electrical Box
Optional Refrigeration Outlet (Top Piping)
P/N511299A
DD6X-ULP
Technical Data Sheet
P/N 0511299_A
NSF
®
Certified
February 2010
Item Part # Description Wiring Item #
F
AN ASSEMBLIES
4 Ft, 8 Ft & 12 Ft (1)
A. 7W Standard Fan Assembly
0058698 Fan Motor, Evaporator
(MO.4410102)
0142780 Fan Blade (FB.0142780) 7W Energy Efficient Fan Assembly 0477654 Fan Motor, Evaporator
(MO.4410545)
0142780 Fan Blade (FB.0142780)
6 Ft Only
A. 4W Standard Fan Assembly (1)
0392457 Fan Motor, Evaporator
(MO.4410101)
0382383 Fan Blade (FB.4780617) 4W Energy Efficient Fan Assembly (1) 0477653 Fan Motor, Evaporator
(MO.4410544)
0382383 Fan Blade (FB.4780617)
Item Part # Description Wiring Item #
THERMOSTATS
B. Optional Adjustable Refrigeration Thermostat (2)
L
AMPS AND BALLASTS
C. Ballast, Electronic (3)
0480130 2 lamps (BA.4481676) 0480131 3 lamps (BA.4481654) 0480132 4 lamps (BA.4481677)
D. Fluorescent Lamp (4)
Replace with like fixtures
LED F
IXTURES AND POWER SUPPLY
E. 0501213 Power Supply (EP.4481861) (5)
F. LED Shelf Fixture (6)
Replace with like fixtures — see page 5
G. LED Canopy Fixture (7)
Replace with like fixtures — see page 5
©2010 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM
ONE FLOOR DRAIN IS
REQUIRED FOR EACH CASE.
IMPORTANT
Note: Revision A is original issue
We reserve the right to change or revise specifications and product design in connection with any feature of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions or replacements for equipment previously sold or shipped.
4 3/4 (121)
Splashguard
3 In.
(77 mm)
Required
Air Gap
Electrical Box
FRONT
8
(203)
4 1/
2
(115)
12 1/
8
(307)
4 3/
4
(121)
4 1/
4
(108)
17 3/
4
(451)
Clearance for Door Opening
22 1/
2
(572)
64 1/
2
(1639)
36 3/
4
(934)
42
(1067)
26 1/
4
(667)
38 3/
8
(975)
30 1/
4
(767)
C
A
B
9
(229)
41 1/
2
(1054)
41 1/2
(1054)
43 7/
8
(1114)
Refrigeration
Outlet
Waste Outlet
Waste Outlet
4 ft 6 ft 8 ft 12 ft
General
(A) Case Length (without ends or partitions) 48 3/8 (1229) 72 3/8 (1838) 96 3/8 (2448) 144 1/2 (3670)
(Each end and insulated partition adds 1 1/2 in. (38 mm) to case line up.)
Maximum O/S dimension of case back to front
(includes bumper) 42 (1064) 42 (1064) 42 (1064) 42 (1064)
Back of case to front of splashguard 38 3/8 (975) 38 3/8 (975) 38 3/8 (975) 38 3/8 (975) Back of case to O/S edge of front rails 30 1/4 (767) 30 1/4 (767) 30 1/4 (767) 30 1/4 (767) Distance between edges of external rails and center rails NA 29 1/2 (750) 41 1/2 (1054) 41 1/2 (1054) Distance between edges of center rails NA NA NA 43 7/8 (1114) Distance between front rails and splashguard 8 (203) 8 (203) 8 (203) 8 (203)
Electrical Service (Electrical Field Wiring connection point located on top of case)
(B) RH End of case to center of 4 x 4 x 2 Electrical Box 39 3/8 (1000) 63 3/8 (1610) 87 3/8 (2219) 135 1/2 (3442)
Back of case to center of 4 x 4 x 2 Electrical Box 17 3/4 (451) 17 3/4 (451) 17 3/4 (451) 17 3/4 (451)
Waste Outlets (One each end)
(C) RH End of case to the center of LH waste outlet 36 1/4 (921) 60 1/4 (1530) 84 1/4 (2141) 132 3/8 (3363)
RH End of case to the center of RH waste outlet 12 1/
8 (307) 12
1
/
8 (307) 12
1
/
8 (307) 12
1
/
8 (307)
Back O/S of case to center of waste outlets 36
3
/4 (933) 36 3/4 (933) 36 3/4 (933) 36 3/4 (933)
Schedule 40 PVC drip pipe 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/4 (32)
Refrigeration Outlet
Back of case to center of refrigeration outlet 26 1/4 (665) 26 1/4 (665) 26 1/4 (665) 26 1/4 (665) RH end of case to center of refrigeration outlet 8 (203) 8 (203) 8 (203) 8 (203)
2 of 9
DD6X-ULP Technical Data Sheet
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900
Engineering
Plan Views
Dimensions shown as in. and (mm).
Ultra Low Front
Dairy & Delicatessen
07-2009
DD6X
Note: ALL FIELD WIRING CONNECTION POINTS ARE ABOVE THE CASE. Case to case connections are made in the electrical box at the top of the case.
PHYSICAL DATA
Merchandiser Drip Pipe (in.) 1 1/4 Merchandiser Liquid Line (in.)
3
/8
Merchandiser Suction Line (in.)
7
/8
REFRIGERATION DATA
Note: This data is based on store temperature and humidity that does not exceed 75°F and 55% R.H.
DD6X-ULP* UNLIT LIT
Discharge Air °F 36 38
Evaporator °F 34 32
Unit Sizing °F 32 30
Btu/hr/ft
— Unlit Shelves *
‡‡
DD6X-ULP Parallel Conventional
U
NLIT 460 470
*Hussmann Peg Shelves are not recommended.
Optional energy efficient motors reduce the
refrigeration load by 43 Btu/hr/ft (4 ft, 8 ft, and
12 ft models) and 36 Btu/hr/ft (6 ft model).
‡‡
Add 10 Btu/hr/ft per shelf row for LED fixtures.
Add 20 Btu/hr/ft per shelf row for fluorescent lamps.
DEFROST DATA
Frequency Hr 24
Defrost Water (lb/ft/day) 1.5
(± 15% based on case configuration and
product loading).
OFFTIME DD6X-ULP
Time (minutes) 25
E
LECTRIC OR G
AS
Not Recommended
CONVENTIONAL CONTROLS
Low Pressure Backup Control
CI/CO** DD6X-ULP
25°F/ 15°F
Indoor Unit Only, Pressure Defrost
Termination** 48°F
**Use a Temperature Pressure Chart to determine PSIG conversions.
PHYSICAL DATA
Estimated Charge *** DD6X-ULP
4 ft 1.9 lb 30 oz 0.9 kg
6 ft 2.8 lb 45 oz 1.3 kg
8 ft 3.7 lb 59 oz 1.7 kg
12 ft 5.1 lb 82 oz 2.3 kg
***This is an average for all refrigerant types. Actual refrigerant charge may vary by approximately half a pound.
3 of 9
P/N 0511299_A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
Impact
Excel
DD6X-ULP
Dairy & Delicatessen
Multi-deck with Doors, 6 Display Levels, Ultra Low Front
70 5/8
(1794)
13 1/2
(343)
Frame
2 1/8
(54)
66
(1677)
Door
7 1/4 (183)
30
(762)
C O
I
L
Refrigeration
Outlet
FAN
DD6XULP
3 In. (77 mm)
Required
Air Gap
4 x 4 x 2 Electrical
Case to Case
Connections
42
(1064)
17 3/4
(451)
4 3/4 (121)
42 (1067)
38 3/8 (975)
26 1/4 (667)
36 3/4 (934)
30 1/4 (767)
89 3/4
(2280)
10 1/4
(260)
87 3/4
(2229)
ALL FIELD WIRING CONNECTION POINTS ARE ABOVE THE CASE.
NSF Certification
This merchandiser model is manufactured to meet ANSI/NSF (National Sanitation Foundation) Standard #7 requirements for construction, materials & cleanability.
Dimensions shown as in. and (mm).
Loading...
+ 6 hidden pages