Husqvarna Z4822-968999301, 968999301, 917277800 Owner’s Manual
Operator's manual
Z4822/968999301
Z4824/968999303
Please read the operator's manualcarefully andmake
sure you understand the instructions before using the machine.
English
Husqvama'- Z4822 Page 1 of 2
Great experience
Z4822 New!
For maneuverability, efficiency and convenience in a
homeowner zero-turu package, the Residential series really
delivers. True zero-turn performance with twin,
maintenance free integrated zero-turn transmissions, heavy-
duty front casters and a rugged stamped and embossed
frame. High perfomaance air induction cutting decks allow
side discharge or optional mulch and collection capability.
Convenient control placement, foam padded steering levers
and adjustable seat travel make these units fun to operate.
Specifications
Engine:
Manu_cturer
Power
Starer
Maintenance-Free
Transmission
Wom-y free performance
with maintenance free,
integrated zero-turn
transmissions.
Heavy-Duty Frame
Doxable, one piece
stamped and embossed
frame for structural
strength.
Height Control
Foot activated deck lift and
cutting height control
allows for easy, quick
adjustments.
Bri_s & Stratton
22 hD
decttic
,'7<?
.....7%
High Performance Deck
High performance air
induction cutting decks are
mulch, side discharge and
collection capable.
Convenience
Convenient control panel
placement makes it a
breeze to operate.
Optional Accessories
Optional utility bed,
headlights and arm rests
add versatility.
Transmission:
YvDe
Speed forward, rain-
max
Speed reverse, rain-
max
Tvres. front/rear
Equipment
Twin IZT
0-6 miles/h
0-3.5 miles/h
18 9.5 x 8 / 4.10x3.50-5"
Cuttin_ width 48"
http ://www.usa.husqvarna.com/node2183 .asp?print=-On&cid = 151 &pid = 102 7/19/06
Husqvmma"-Z4822 Page2of 2
Cuttin_ height 1.5-4.5 in 1/2" increments"
Number of blades 3
Blade length 19"
Anti-scalD rollers 4
Sprung standard Standard w/o armrest
seat
Blade engagement
Deck construction
Productivity
Overall dimensions
Base machine
(LxWxI-B
Dual levers with foam padded
hand _iDs
12 g'4.uge, stamped steel,
powder coated
72x59x42"
http://www.usa.husqvarna.conffnode2183.asp?print=On&cid = 151 &pid = 102 7/19/06
OPERATOR'S MANUAL
RIDER
Z SERIES
Contents
Contents ................................................................... 1
Introduction ............................................................. 3
Congratulations.................................................... 3
General ................................................................ 3
Drivingand Transporton PublicRoads ............... 3
Towing ................................................................. 3
Operating............................................................. 3
Good Service ....................................................... 4
ManufacturingNumber ........................................ 4
Symbols and Decals ............................................... 5
Safety Instructions .................................................. 7
General Use......................................................... 7
Personal Safety Equipment................................. 9
Drivingon Slopes................................................. 9
Children.............................................................. 10
UtilityBox........................................................... 10
Maintenance ...................................................... 11
Transport............................................................ 13
Customer responsibilities................................... 14
Controls ................................................................. 16
Control Locations............................................... 16
1. MotionControl Levers.................................... 17
2. Seat adjustment knobs.................................. 18
3. Fuses ............................................................. 18
4. By passlinkages ............................................ 19
5. Refueling........................................................ 20
6. Blade switch................................................... 20
7. IgnitionSwitch................................................ 21
8. Choke Control................................................ 21
9. ThrottleControl.............................................. 21
10. Hour Meter................................................... 22
11. ParkingBrake .............................................. 22
12. Cuttingheight pedal..................................... 23
Accessories........................................................ 23
Operation ............................................................... 24
Training.............................................................. 24
BeforeStarting................................................... 25
Starting the Engine ............................................ 25
To start an engine with a weak battery..............28
Running.............................................................. 29
Operating on hills............................................... 30
MowingTips....................................................... 31
Stopping the Engine........................................... 32
Movingby Hand ..................................................... 33
Maintenance ......................................................... 34
Maintenance Schedule ...................................... 34
Battery ............................................................... 36
Ignition System .................................................. 37
Checking the Safety System ............................. 38
Checking the Engine's Cooling Air Intake ......... 39
Checking and Adjusting the Throttle Cable ....... 39
Replacing the Air Filter ...................................... 40
Replacing the Fuel Filter ................................... 41
Checking Tire Pressures ................................... 41
Checking the Parking Brake .............................. 41
Checking the V-belts ......................................... 42
Deck belt ........................................................... 42
EZT belt............................................................. 44
Checking the Blades ......................................... 45
Adjusting the Mower Deck ................................ 46
Cleaning and Washing ...................................... 50
Caster Wheels ................................................... 50
Hardware ........................................................... 50
Lubrication ............................................................ 51
Lubrication Schedule ......................................... 51
General ............................................................. 51
Lubricating the Cables ...................................... 52
Lubricating in Accordance with the Lubrication
Schedule ........................................................... 52
Trouble Shooting Guide ...................................... 56
Storage .................................................................. 59
Winter Storage .................................................. 59
Service .............................................................. 59
Wiring diagram ..................................................... 60
Technical Data...................................................... 61
Accessories....................................................... 63
Torque Specifications ........................................ 63
Conformity Certificates ........................................ 64
USA requirements ............................................. 64
Service Journal .................................................... 65
Delivery Service ................................................ 65
After the First 5-8 Hours .................................... 66
25-Hour Service ................................................ 67
50-Hour Service ................................................ 68
I g0-Hour Service .............................................. 69
300-Hour Service .............................................. 70
At Least Once Each Year .................................. 71
English-1
WARNING!
Failure to follow cautious operating practices can result in serious injury to the
operator or other persons. The owner must understand these instructions, and must
allow only trained persons who understand these instructions to operate the mower.
Each person operating the mower must be of sound mind and body and must not be
under the influence of any mind altering substance.
WARNING!
Engine exhaust, some of its constituents, and certain vehicle components contain or
emit chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm.
WARNING!
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
English-2
INTRODUCTION
Introduction
Congratulations
Thank you for purchasing a Husqvama ride-on mower. This machine is built for the greatest efficiencyand
rapid mowing pdmarily of large areas. Controls in one place and a hydrostatic transmission regulated by
steering controls also contribute to the machine's performance.
This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) by all who
operate this machine can considerably increase the lifespan of your machine and even increase its resale
value. It is also very important to follow the instructions for the safety of you and others.
If you sell your machine, be sure to give the operator's manual to the new owner.
The final chapter of this operator's manual comprises a Service Journal. Ensure that service and repair
work isdocumented. A well kept service joumal reduces service costs for the saason-basad maintenance
and affects the machine's resale value. Take the operator's manual along when the machine is left to the
workshop for service.
General
In this operator's manual, left and right, backward and forward are used in relation to the machine's normal
ddving direction.
Continuous dedication to improve our products require that specifications and design are subject to change
without notice.
Driving and Transport on Public Roads
Check applicable road trafficregulations beforetransportingon publicroads. Ifthe machine is transported,
you must always useapproved fasteningequipment and ensure that the machine iswell anchored. DO
NOT operate this machineon publicroadways.
Towing
Do not towthis machine, it may cause damage to the drive system.
Do not tow any trailers,etc withthis mower.They may jackknifeor overturn causingdamage tothe mower
and possiblysedous injuryto the operator.
Operating
This machine is constructed onlyfor mowinggrass on lawns and other free and even ground without
obstacles such as stones, tree stubs, etc. The machine can also be used for other tasks when equipped
with special accessories provided by the manufacturer, for which the operating instructions are provided in
conjunction with delivery. All other types of use ere incorrect. The manufacturer's directions concerning
operation, maintenance, and repairs must be carefully followed.
Lawnmowers and all power equipment, can be potentiallydangerous if used improperly.Safety requires
good judgement, careful use in accordance with these instructions and common sense.
The machine must onlybe operated, maintained, and repaired by persons that are familiar withthe
machine's special characteristics and who are well versed inthe safety instructions. Use only approved
repair parts to maintain this machine.
Accident prevention regulations, other general safety regulations, occupationalsafety rules, and traffic
regulations must befollowed without fail.
Unauthorized modifications to the design of the machine may absolve the manufacturerfrom liability for
any resulting personal injury or property damage.
English-3
INTRODUCTION
Good Service
Husqvama's productsare sold allover the worldand onlyinspecialized retail storeswithcompleteservice.
This ensuresthat you as a customer receive only the best supportand service.Before the productis
delivered, the machinehas, for example, been inspectedand adjustedby yourretailer, see the certificate
inthe Service Journal in thisoperator's manual.
When you need spare parts or supportin servicequestions,warranty issues,etc., please consult
the following professional:
This Operator's Manual belongs to the Engine Transmission
machinewith manufacturingnumber:
Manufacturing Number
The machine's manufacturing number can be found on the printedplate affixedto the leftin the engine
compartment.Stated on the plate, from thetop are:
The machine's typedesignation(I.D.).
The manufacturer's type number (Model).
The machine's serialnumber (Serial no.)
Please state the type designation and serial numberwhen orderingspare parts.
The engine's manufacturingnumber is stamped on one ofthe valve covers.
The plate states:
The engine's model.
The engine's type.
Code
Please state these when ordering spare parts.
The Hydro Drive IZ gears have a barcede decal affixed to the rear of the gears.
English_l
SYMBOLS AND DECALS
Symbols and Decals
These symbolsare found on the machine and in the operator's manual.
Studythem carefullyso that you knowwhat they mean.
WARNING!
Xxxxxxx xxxx xxx_xxx xxx x
Xxxxx xxxxxx xx.
XX X](XXXXXX XXXXX XXX XX.
Used in this publication to notify the reader of a riskof personal injury or death, particularlyifthe reader
shouldneglect to followinstructionsgiven inthe manual.
IMPORTANT INFORMATION
Xxxxxxx xxxx xxxxxxxx xxx xxx
XXXX XXXXXX XX.
I
Used inthis publication to notify the reader of a risk of material damage, particularlyif the reader should
neglectto follow instructionsgiven in the manual. Used also when there is a potentialformisuseor
misassembly.
I
R N I',,I
Reverse Neutral Fast Slow Choke Fuel
Warning! Parkingbrake CEconformity WamingtRotating
marking.Onlyfor blades,keepawayfrom
Europeanmarket thedischargedeck
Batteryacid is corrosive, explosive,
and flammable
Donotstandhere
%
Useprotectiveglasses
Useprotectivegloves
Noiseemissionstothe surroundings
inaccordansewiththeEuropean
Union'sdirective.Themachine's
emissionisstatedinthechapter
TECHNICALDATAandonthedecals.
Only machines for European
market
Do not touchrotating
parts
English-5
SYMBOLS AND DECALS
Read
Operators
Manual
A
VVhole
body
exposure
tothmwn
o_e_s.
Shut off engine
& remove key
before
performingany
maintenance or
repair work.
&
A
Sevedng
offingers
& toes.
Keep a safe Use on
distancefrom slopesno
the machine, greater
Do not open
or remove
safety
shieldswhile
engine is
running.
than f0 °.
Careful
backing up,
watch for
other people.
No
passengers
<__
Careful going
forward,
watch for
other people.
DANGER
Moving sharp blades
undercover
English-6
SAFETY INSTRUCTIONS
Safety Instructions
These instructionsare for your safety,Read them carefully.
WARNINGI
This symbol means that important safety instructions need to be emphasized. It
concerns your safety.
IMPORTANT: THIS CUFFING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND
THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
General Operation
Read, understand,and follow all
instructions on the machine and in the
manual before starting.
Do not put hands or feet near rotating
parts or under the machine. Keep clear
of the discharge opening at aUtimes.
Only allow responsible adults, who are
familiar with the instructions, to operate
the machine.
Clear the area of objects such as rocks,
toys, wire, etc., which could be picked up
and thrown by the blades.
Be sure the area is clear of bystanders
before operating. Stop machine if anyone
enters the area.
Readthe operator'smanualbeforestartingthe
machine
8011 512
I
Never carry passengers. The machine is
only intendedfor use by one person.
Do not mow in reverse unless absolutely
necessary. Always look down and behind
before and while backing.
Never direct discharged material toward
anyone. Avoid discharging material
against a wall or obstruction. Materiel
may ricochet back toward the operator.
Stop the blades when crossing gravel
surfaces.
Do not operate machine without the
entire grass catcher, discharge guard, or
other safety devices in place and working
Slow down before turning.
Never leave a running machine
unattended. Always turn off blades, set
parking brake, stop engine, and remove
keys before dismounting.
80H-513
Clear the area of objects before mowing
8011_520
Never take passengers
English-7
SAFETY INSTRUCTIONS
Disengage blades when not mowing.
Shut offengine and wait for all parts to
come toa completestop beforecleaning
the machine, removingthe grass
catcher,or uncloggingthe discharge
guard.
Operate machine onlyindaylightor good
artificiallight.
Do notoperate the machinewhile under
the influenceof alcohol or drugs.
Watch for trafficwhen operating near or
crossingroadways.
Use extra care when loadingor
unloadingthe machineinto a traileror
truck.
Always wear eye protection when
operating machine.
Data indicates that operators,age 60
years and above, are involvedina large
percentage of ridingmower-related
injudes.These operators should
evaluate their abilityto operate the riding
mower safelyenoughto protect
themselves and others from serious
injury.
Followthe manufacturer's
recommendationfor wheel weightsor
counterweights.
Never allowchildrenorotherpersonsnot
trained in the use of the machineto use
or serviceit. Locallaws may regulate the
age ofthe user. Anyone who operates
this machineshouldfirstread and
understand this Operator's Manual.
Keep machine free of grass, leaves or
otherdebrisbuild-upwhichcan touch hot
exhaust / engine partsand burn. Do not
allowthe mower deckto plow leaves or
otherdebris whichcan cause build-upto
occur.Clean any oilor fuel spillage
before operatingor storingthe machine.
Allow machineto cool before storage.
WARNING!
Engine exhaust and certain
vehicle components contain
or emit chemicals considered
to cause cancer, birth defects,
or other reproductive system
damage, The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas, Do not use the
machine in enclosed spaces,
English-8
SAFETY INSTRUCTIONS
Personal Safety Equipment
WARNING!
When using the machine, approved personal protective equipment (shown in
illustrations) shall be used. Personal protective equipment cannot eliminate
the risk of injury but itwill reduce the degree of injury if an accident does
happen. Ask your retailer for help in choosing the right equipment.
Make sure that you have firstaid equipment
close at handwhen usingthe machine.
Never use the machine when barefoot.
Always wear protectiveshoes or boots,
preferablywith steeltoecaps.
Always wear approved protectiveglasses
or a full visorwhen assembling or driving.
Always wear gloveswhen handlingthe
blades.
Never wear looseclothingthatcan get caught
in movingparts.
Use ear protectorsto avoid damage to
hearing.
%
B011_70
Personalprotectiveequipment
Slope Operation
Slopes are a majorfactor related to lossof
controland tip-over accidents,whichcan
resultin severe injuryor death. Operationon
all slopes requiresextra caution, If you
cannot back upthe slope or ifyoufeel uneasy
on it, do not mow it.
Mow up and downslopes (10 degrees
maxium), notacross.
Watch for holes, ruts, bumps, recks,or
other hiddenobjects. Uneven terrain
could overturnthe machine.Tall grass
can hideobstacles.
Choose a low groundspeed so that you
will not have to stop while onthe slope.
Do notmow onwet grass. Tiresmay lose
traction.
Avoid starting,stopping,or turningon a
slope. Ifthe tireslosetraction,disengage
the blades and proceed slowly straight
downthe slope.
Keep all movement on the slopes slow
and gradual. Do not make sudden
changes in speed or direction,which
could cause the machine to rollover.
60C_004
Mow up and down, notside-to-side
WARNING!
Do not drive up or down hills
with slopes greater than 10
degrees. And do not drive
across any slopes.
English-9
SAFETY INSTRUCTIONS
Use extra care while operating machine
withgrass catchersor other attachments;
they can affectthe stabilityofthe
machine. Do not use on steep slopes.
Do nottry to stabilizethe machine by
putting your foot on the ground.
Do not mow near drop-offs, ditches, or
embankments. The machinecould
suddenlyroll over ifa wheel is over the
edge or if the edge caves in.
Children
Tragic accidents can occurifthe operator is
not alert to the presence ofchildren.Children
are often attracted to the machineand the
mowing activity.Never assume that children
willremain where you last saw them.
Keep childrenout of the mowing area
and inthe watchful care of a responsible
adult otherthan the operator.
Be alert and turn machineoff if a child
enters the area.
Beforeand whilebacking, look behind
and down for smallchildren.
Never carry children, even with the
blades shutoff. They may fall off and be
seriouslyinjuredor interfere with safe
machine operation.Childrenwho have
been given rides inthe pastmay
suddenlyappear in the mowing area for
another ride and be run over or backed
over by the machine.
Never allow childrento operate the
machine.
8011-519
Be extra cautious whendriving on slopes
8011_517
Neverallowchildrentooperatethe machine
Use extra care when approachingblind
corners,shrubs, trees, or other objects
that may block yourview of a child.
English-10
coil-st8
Keep children away from the work area
SAFETY INSTRUCTIONS
Maintenance
WARNING!
The engine must not be started when the driver's floor plate or any protective plate
for the mower deck's drive belt is removed,
Safe Handling of Gasoline
To avoid personalinjury or propertydamage,
use extreme care in handlinggasoline.
Gasoline isextremely flammable and the
vapors are explosive.
Extinguishall cigarettes,cigars, pipes,
and other sourcesof ignition.
Use only approved gasoline container.
Never remove gas cap or add fuel with
the engine running.Allowengine to cool
at least two (2) minutes before refueling.
Never fuel the machine indoors.
Never store the machine or fuel
containerwhere there is an open flame,
spark, or pilotlightsuch as on a water
heater or other appliances.
Never fillcontainersinsidea vehicleor
on a truck or trailer bed with plasticliner.
Always place containerson the ground
away from your vehiclewhen filling.
Remove gas-powered equipment from
the truck or trailer and refuelit on the
ground.If this is not possible,then refuel
suchequipment with a portable
container,ratherthan from a gasoline
dispensernozzle.
Keep the nozzle in contactwiththe rimof
the fuel tank or containeropening at all
times untilfuelingis complete. Do not
use a nozzle lock-open device.
Iffuel is spilledon clothing,change
clothingimmediately.
Never overfillfuel tank. Replace gas cap
and tighten securely.
Do not start the engine near spilled fuel.
Never use gasoline as a cleaning agent.
If leaksarise inthe fuel system,the
engine must not be started untilthe
problemhas been resolved.
Check thefuel level before each useand
leave space forthe fuel to expand,
because the heat from the engine and
I
Never fill the fuel tank indoors
WARNING!
The engine and the exhaust
system, become very hot during
operation.
Risk for burns if touched.
Allow engine and exhaust
system to cool at least two (2)
minutes before refueling
English-11
SAFETY INSTRUCTIONS
the sun may otherwise cause the fuel to
expand and overflow.
General Maintenance
Never operate machine in a closed area.
Keep all nuts and boltstightto be sure
the equipmentis in safe working
condition.
Never tamperwith safety devices. Check
their properoperationregularly.
Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage and remove any fuel-soaked
debris. Allow machine to cool before
storing.
If you strike a foreign object, stop and
inspectthe machine. Repair, if
necessary,before restarting.
Never make any adjustmentsor repairs
withthe engine running.
Check grass catcher components and
the discharge guardfrequently and
replace with manufacturer's
recommended parts,when necessary.
Mower blades are sharp. Wrap the blade
or wear gloves, and usa extra caution
when servicingthem.
Check brake operationfrequently. Adjust
and service as required.
Maintainorreplace safety and instruction
labels, as necessary.
Do not modify safetyequipment. Check
regularlyto be sure itworks properly.
The machine must not be drivenwith
defective or unmountedprotective
plates, protectivecowlings, safety
switches,or other protectivedevices.
Do not change the settingsof governors
and avoid running the engine with ovedy
high engine speeds. If you run the
engine too fast, you risk damaging the
machine components.
Be verycareful when handlingbattery
acid. Acidon skincan cause serious
corrosive bums. If you spillbattery acid
on your skin,rinse immediatelywith
water.
Never drive the machine in an enclosed space
Always use protective glasses
when handling the battery.
WARNING!
The battery contains lead and
lead compounds, chemicals that
are considered to cause cancer,
birth defects, and other
reproductive system damage.
Wash your hands after handling
the battery.
I
English-12
SAFETY INSTRUCTIONS
Acid in the eyes can cause blindness,
contact a doctor immediately.
Be careful when servicingthe battery.
Explosive gasesform in the battery. Never
perform maintenance on the battery when
smoking or near open flames or sparks.
The battery can explode and cause serious
injury/damage.
Ensure that nutsand bolts, especiallythe
fastening bolts for the blade attachments,
are propedy tightened, torqued and that
the equipment is in good condition.
Do not modify safety equipment. Check
regulady to be sure it works properly.
The machine must not be driven with
defective or unmounted protective
plates, protective cowlings, safety
switches, or other protective devices.
Do not change the settingsof governors
and avoid runningthe engine with ovedy
high engine speeds. If you runthe
engine too fast, you risk damaging the
machine components.
Sparkingcan occurwhen workingwith the
battery and the heavy cables ofthe starter
circuit.This can cause batteryexplosion,
fire or eye injury.Sparkinginthis circuit
can not occurafterthe chassiscable
(normallynegative,black)is removed
fi'om the battery.
Avoid electrical sparking and its
I_ ARNING!
consequences by the following
routines:
6003_09
Donot smokewhenperformingmaintenanceonthe
battery Thebatterycanexplode andcauseserious
injury/damage
800_7Z8
Risk of sparking
I
Use protectivegoggles.
Ensure thatthe fuel filler cap ismounted
tightlyand noflammable substance is
storedin an openvessel.
Never work with the starter circuitif there
is spilledfuel.
Disconnectthe chassis cable fTomthe
battery firstand reconnectit last.
Do notmake a bridgeshort circuitacross
the starter relay to runthe starter.
Never use the machine indoorsor in
spaces lacking properventilation.The
exhaustfumes containcarbon monoxide,
an ododess, poisonous,and lethal gas.
Stopand inspect the equipmentif you
English-13
SAFETY INSTRUCTIONS
run over or intoanything.If necessary,
make repairs before starting.
Never make adjustments with the engine
running.
The machine is tested and approved only
with the equipment originally provided or
recommended by the manufacturer. Only
use approved repairpartsfor the
machine.
The blades are sharp and can cause
cutsand gashes. Wrap theblades oruse
protectivegloveswhen handlingthem.
Check the parkingbrake's functionality
regularly.Adjust and serviceas
necessary.
The mulchblades shouldonlybe used in
familiar areas when higherquality
mowingis desired.
Reduce the riskoffire by removing
grass, leaves, and other debris that may
have accumulatedonthe machine.Allow
the machineto cool before puttingit in
storage.
Regularlyclean deck and undersideof
deck, avoid sprayingengine and
electdcal componentswithwater.
80_1_44
C/ean the machine regularly
Transport
The machine isheavy and can cause
sedouscrushinginjuries.Be extra
cautiouswhen it isloaded on or
unloaded froma vehicle or trailer.
Use an approved trailer to transportthe
machine.Activate the parking brake, turn
offthe fuel supply,and fasten the
machinewith approved fastening
devices, such as bands, chains,or
straps,when transporting.
Do not operate this machineon public
roadways.
Check and abide by localtraffic
regulations before transporting the
machine on any road.
Do not tow this machine, it may cause
damage to the drive system.
Do nottow any trailers, etc. withthis
mower.They may jackknife or overtum
causingdamage to the mower and
possiblyseriousinjury tothe operator.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock
the machine in place during transport.
Ensure that the machine iswell fastened
to the transport vehicle. Always reverse
the machine onto the transport vehicle to
avoid tipping it over.
English-14
SAFETY INSTRUCTIONS
Customer responsibilities
Read and observethe safety rules.
Follow a regular schedule in maintaining,
caring for and using your mower.
Follow the instructions under
"Maintenance" and "Storage" sections of
this owner's manual.
This machinehas no brain• Use yours!
WARNING!
This mower is equipped with an internal combustion engine and should not be
used on or near any unimproved forest-covered, bush-covered or grass-covered
land unless the engine's exhaust system is equipped with a spark arrester
meeting applicable local or state laws (if any). If a spark arrester is used, it should
be maintained in effective working order by the operator.
A spark arrester for the muffleris available through your authodzed Husqvama dealer.
English-15
CONTROLS
Controls
This operator'smanual describes the
HusqvarnaZero Turn Rider.The rider is fitted
with a Briggs and Stratton four-stroke engine
developing 22-24 horse power.
Transmissionfrom the engine is madevia two
belt-driven hydrostat transaxles, one for each
drive wheel. Using the lef_and right steering
controls, the flow is regulated and thereby the
direction and speed.
12 11 10 9 8 7 6 5
801t_48
Zero Turn Rider
Locationsof the controls
Control Locations
1. Motioncontrol, levers
2. Seat adjustment knobs
3. Fuses
4. By-pass linkages
5. Fueltank cap
6. Bladeswitch
7. Ignition swittch
English-16
1 2 3 4
Page
17
18
18
19
20
8. Choke control
9. Throttlecontrol
10. Hour meter
11. Parking brake
12. Cuttingheight pedal
20
21
8011735
Page
21
21
22
22
23
CONTROLS
t. Motion Control Levers
The machine's speedand direction are continuously
variable usingthe two steeringcontrols. The
steeringcontrolscan be moved forwardor
backwardabout a neutral position.Furthermore,
there is a neutral position,which islocked if the
steedng controls are moved outward.
When both controlsare in the neutral position
(N), the machine stands still.
By movingboth controlsan equal amount
forward or backward, themachine movesina
straight line forward or backward respectively.
In order,for example, toturn dght whilemoving
forward, move the dght controltowards the neutral
position.The rotationofthe dght wheel isreduced
and themachineturnsto the dght.
Zero turncan be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position. If the
left steering control is pulled backward, the machine
turns to the left. Use extra care when using this
maneuver
8011351
Motion control levers
WARNING!
The machine can turn very
rapidly if one steering control
is moved much further forward
than the other,
Tracking
If the mower is nottrackingstraight, check the air
pressure in both rear tires. Recommended air
pressure is 15 psi (1 bar). Tracking must be
checked on aflat and level concrete or blacktop
surface. If unit still does not track straight, contact a
Husqvarna workshop for adjustment.
2 3
4
8011 791
1 Forward
2 Neutral
3 Neutral slot, Neutral lock
4 Reverse
Motion controllever pattem (rightside)
English-17
CONTROLS
2. Seat adjustment knobs
The seat can be adjusted lengthways. When
making adjustments, loosen the four knobs
under the seat pan, after which the seat can
be moved backward or forward. Do not forget
to tighten the knobs.
3. Fuses
The fuses are located in the rightfront corner
ofthe engine compartment.They are fiatpin
fuses ofthe same type used in automobiles.
There are two fuses.
Fuse ratings and functions:
20 A, Primary fuse.
7.5 A, Mower deck coupling.
CZ1
Lengthwaysadjustment
Fuses
8011 J_3
English-18
CONTROLS
4. By pass linkages
When pushing or pulling the mower, be sure
toengage the IZT (Integraded Zerotum
Transaxle) bypass linkages. The IZT bypass
linkages are locatedon the rear of the frame,
belowthe rear engine guard.
Raise the deck intothe highest cutting
position.
Pull the IZT bypass linkages out and into
the slotsand release so that it isheld in
the bypass position.
To reengage the IZ'l"sto drive, reverse
the above procedure.
\
8011-721
1. IZT Bypass linkage
Bypass linkages
\
2
1.Headoutsideof reardeck
2. IZTBypasslinkageinbypassposition
Bypassposition
801t 722
English-1 g
CONTROLS
5. Refueling
The machine has one fuel tank, just behind
the seat. The tank capacity is 3 gallons
(11.4 liters).
The engine will run on a minimum of
85-octane unleaded gasoline (no oil mix).
Environmentally adapted alkylate gasoline
can be used. See also Technical Data
concerning ethanol fuel. Methanol fuel is not
allowed.
WARNING!
Gasoline is highly flammable.
Observe caution and fill the
tank outdoors
(see the safety rules).
WARNING!
The engine and the exhaust
system, become very hot
during operation.
Risk for burns if touched.
Allow engine and exhaust
system to cool at least two (2)
minutes before refueling.
WARNING!
Fill to bottom of filler neck. Do
not overfill. Wipe off any
spilled oil or fuel. Do not store,
spill or use gasoline near an
open flame.
_117_
Fuel tank
IMPORTANT INFORMATION
Experience indicates that alcohol
blended fuels (called gasohol, ethanol or
methanol) can attract moisture which
leads to separation and formation of
acids during storage. Acidic gas can
damage the fuel system of an engine
while in storage. To avoid engine
problems, the fuel system should be
emptied before storage of 30 days or
longer. Drain the gas tank, start the
engine and let it run until the fuel lines
and carburetor are empty. Use fresh fuel
the next season. See Storage
Instructions for additional information.
Never use engine or carburetor cleaners
in the fuel tank or permanent damage
may occur.
When operating in temperatures below 32° F.
(0° C.), use fresh, clean winter gradegasoline
to help insure goodcoldweather starting.
6. Blade switch
In order to engage the mower deck, pullthe
knob out; the mower blades are disengaged
when the knob is depressed.
English-20
_117_
Blade Switch
Loading...