Husqvarna 917376822 Owner’s Manual

Owner's Manual

sqva

ROTA

Y LAWN

173cc Kohler Engine Power-Propelled

21" Multi-Cut

Model No.

917.376822 Product No.

7021

MOWER

• Espa_ol, p. 20

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Husqvarna, Charlotte, NC 28269

Visit our website: www.husqvarna.com

U.S.A.

Safety Rules .......................................... 2-3

Warranty ................................................ 4-6

Product Specifications .............................. 7

Assembly / Pre-Operation ........................ 8

Operation ............................................. 9-14

IMPORTANT: This cutting machine iscapable of amputating hands and feet and throwing ob-

jects. Failure to observe the following safety instructions could result in serious injury or death. ALook for this symbol to point out im-

portant safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

&WARNING: Inorderto prevent accidental starting when setting up, transporting, ad-

justing or making repairs, always disconnect spark plug wi re and place wi rewhere it cannot

come in contact with plug. &WARNING: Engine exhaust, some of its

constituents, and certain vehicle compo-

nents contain or emit chemicals known to

the State of California to cause cancer and

birth defects or other reproductive harm.

&WARNING: Battery posts, terminals and

related accessories contain lead and lead

compounds, chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash

hands after handling.

A CAUTION: Muffler and other engine

parts become extremely _'_.._, hot during operation and

remain hot after engine has stopped. To avoid

severe burns on contact, stay away from these areas.

I. GENERAL OPERATION

. Read, understand, and follow all

instructions on the machine and in the manual(s) before starting. Be thoroughly

familiar with the controls and the proper use of the machine before starting.

. Do not put hands or feet near or under

rotating parts. Keep clear of the dis- charge opening at all times.

. Only allow responsible individuals, who

are familiar with the instructions, to operate the machine.

. Clear the area of objects such as rocks,

toys, wire, bones, sticks, etc., which could be picked up and thrown by blade.

. Be sure the area is clear of other people

before mowing. Stop the machine if anyone enters the area.

Maintenance Schedule ........................... 14

Maintenance ...................................... 14-17

Service and Adjustments ................... 17-19

Storage .............................................. 19-20

Troubleshooting ................................. 20-21

Repair Parts ....................................... 42-51

. Do not operate the mower when bare-

foot or wearing open sandals. Always wear substantial foot wear.

. Do not pull mower backwards unless abso-

lutely necessary. Always Iookdown and be- hind before and while moving backwards.

. Never direct discharged material toward

anyone. Avoid discharging material against a wall or obstruction. Material may richo-

chet back toward the operator. Stop the blade when crossing gravel surfaces.

. Do not operate the mower without

proper guards, plates, grass catcher or other safety protective devices in place.

. See manufacturer's instructions for

proper operation and installation of accessories. Only use accessories ap-

proved by the manufacturer.

. Stop the blade(s) when crossing gravel

drives, walks, or roads.

. Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

. Shut the engine (motor) off and wait

until the blade comes to complete stop before removing grass catcher.

. Mow only in daylight or good artificial light. . Do not operate the machine while under

the influence of alcohol or drugs.

. Never operate machine in wet grass.

Always be sure of your footing: keep a firm hold on the handle; walk, never run.

. Disengage the self-propelled mech-

anism or drive clutch on mowers so equipped before starting the engine.

. If the equipment should start to vibrate

abnormally, stop the engine (motor) and check immediately for the cause. Vibra-

tion is generally a warning of trouble.

. Always wear safety goggles or safety glass-

es with side shields when operati ng mower.

II. SLOPE OPERATION Slopes are a major factor related to slip &

fall accidents which can result in severe injury. All slopes require extra caution. If

2 you feel uneasy on a slope, do not mow it.

DO:

. Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

. Remove obstacles such as rocks, tree

limbs, etc.

o Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

o Do not trim near drop-offs, ditches or

embankments. The operator could lose

footing or balance. o Do not trim excessively steep slopes. o Do not mow on wet grass. Reduced

footing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the operator is

not alert to the presence of children. Children

are often attracted to the machine and the

mowing activity. Neverassume that children will remain where you last saw them. o Keep children out of the trimming area

and under the watchful care of another responsible adult.

o Be alert and turn machine off if children

enter the area.

o Before and while walking backwards,

look behind and down for small children.

o Never allow children to operate machine. o Use extra care when approaching blind

corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. o Extinguish all cigarettes, cigars, pipes

and other sources of ignition.

o Use only an approved container. o Never remove gas cap or add fuel with

the engine running. Allow engine to cool before refueling.

o Never refuel the machine indoors. o Never store the machine or fuel contain-

er where there is an open flame, spark or pilot light such as a water heater or

on other appliances.

o Never fill containers inside a vehicle, on

a truck or trailer bed with a plastic liner. Always place containers on the ground

away from your vehicle before filling.

o Remove gas-powered equipment from

the truck or trailer and refuel it on the ground. If this is not possible, then

refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

o Keep the nozzle in contact with the rim

of the fuel tank or container opening at all times until fueling is complete. Do

not use a nozzle lock-open device.

o If fuel is spilled on clothing, change

clothing immediately.

o Never overfill fuel tank. Replace gas

cap and tighten securely.

GENERALSERVICE

Never run machine inside a closed area.

Never make adjustments or repairs with the engine (motor) running. Disconnect the

spark plug wire, and keep the wire away from the plug to prevent accidental starting.

o Keep nuts and bolts, especially blade

attachment bolts, tight and keep equip- ment in good condition.

o Never tamper with safety devices. Check

their proper operation regularly.

o Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel spill- age. Allow machine to cool before storing.

o Stop and inspect the equipment if you

strike an object. Repair, if necessary, before restarting.

o Never attempt to make wheel height

adjustments while the engine is running.

o Grass catcher components are subject to

wear, damage, and deterioration, which

could expose moving parts or allow objects to be thrown. Frequently check compo-

nents and replace with manufacturer's recommended parts, when necessary.

o Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

o Do not change the engine governor set-

ting or overspeed the engine.

o Maintain or replace safety and instruc-

tion labels, as necessary.

AWARNING: This lawn mower is equipped with an internal combustion engine and

should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it

should be maintained in effective working order by the operator.

Inthe state of California the above is required by law (Section 4442 of the California Public

Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Husqvarna or other authorized service center (See the REPAIR PARTS section of this manual).

Husqvama

CONSUMER WHIEIELIED PRODUCTS - LiMiTED WARRANTY

Husqvarna warrants to the original retail purchaser that this Husqvarna® product is free from defects in material or workmanship= under normal use and maintenance from the date of retail purchase for

the applicable Warranty Period shown on Exhibit A. Certain components (e.g., engines and trans-

missions) are excluded from coverage, and other limitations apply, as described in this document. Husqvarna will repair or replace at its discretion, any defective product or part covered by the Limited

Warranty, free of charge at any authorized Husqvarna Servicing Dealer/Center using original OEM

Husqvarna replacement parts, subject to the limitations and exclusions described below. Husqvarna

does not offer an over-the-counter exchange program. THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY PROVIDED BY HUSQVARNA.

ANY WARRANTY THAT MAY BE IMPLIED BY LAW (INCLUDING ANY IMPLIED WARRANTY OF

FITNESS FOR A PARTICULAR PURPOSE OR USE AND IMPLIED WARRANTY OF MERCHANT-

ABILITY) IS LIMITED TOTHE DURATION OFTHEAPPLICABLE WARRANTY PERIOD UNDER THIS

LIMITED WARRANTY. THIS LIMITED WARRANTY MAY BE MODIFIED ONLY BY HUSQVARNA.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS,AND YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS GIVEN ONLY BY HUSQVARNA. THE ABOVE REMEDIES ARE

THE EXCLUSIVE REMEDIES FOR ANY BREACH OF THIS LIMITED WARRANTY. HUSQVARNA AND ITS AFFILIATED COMPANIES SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGE, INCLUDING LOST PROFITS RESULTING FROM ANY SUCH

BREACH, AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED. SOME STATES DO NOT AL- LOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO

THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

LIMITATIONS AND EXCLUSIONS

1. Engines, Transmissions and certain other components are NOT covered. This Limited Warranty does not cover any of the following:

(a) Engines and Attachments. Except where otherwise indicated on Exhibit A, all Engines and At-

tachments are not covered by this warranty. In most cases, these items are NOT manufactured

by Husqvarna in which case they may be covered separately by their respective manufacturer's warranties if one is provided and included with the product at the time of purchase. All such claims must be submitted and sent to the appropriate manufacturer or as otherwise directed

in those separate warranties. Husqvarna is not authorized to handle warranty adjustments or

repairs on engines manufactured by Briggs & Stratton, Honda, Kawasaki, or Kohler (exception

- models equipped with LCT engines). Husqvarna does not assume any warranty obligation of the other manufacturer's engines.

(b) Transmissions. Except where otherwise indicated on Exhibit A, Transmission / Transaxle (in-

cluding Drive Systems) are not covered by this warranty. In most cases, these items are NOT

manufactured by Husqvarna in which case they may be covered separately by their respec- tive manufacturer's warranties if one is provided and included with the product at the time of

purchase. The following transmission / transaxle manufacturers, Dana, Hydro-Gear, Tuff-Torq

provide a warranty for the transmission / transaxle to the ultimate purchaser or to Husqvarna.

Husqvarna will assign the transmission / transaxle manufacturer's warranty or any rights thereof to the original purchaser of the unit. To obtain transmission / transaxle warranty service, first

contact the retailer who you purchased the unit from. Should you require assistance or have

any questions concerning transmission / transaxle warranty coverage, contact Husqvarna di-

rectly at our website www.husqvarna.com or call 800-487-5951 for an authorized Husqvarna

service provider. All such claims must be submitted and sent to the appropriate manufacturer or as otherwise directed in those separate warranties. Husqvarna is not authorized to handle

warranty adjustments or repairs on transmissions or transaxles. Husqvarna does not assume

any warranty obligation of the above listed manufacturers (for exceptions - see Exhibit _A).

("Expendable Parts"), including without limitation spark plugs, bulbs, filters, lubricants, starter cords, belts, blades, and blade adapters.

(d) Emissions Control Components. This Limited Warranty does not cover Emissions control equip-

ment and components to the extent regulated by the U.S. Environmental Protection Agency or

similar state agencies. Such equipment and components are covered by a separate emission control warranty statement supplied with your new product. Please consult this separate war-

ranty statement for details.

2. Any COMMERCIAL, INSITUTIONAL, AGRICULTURAL, INDUSTRIAL, INCOME PRODUCING, or RENTAL use will result in either NO WARRANTY or a Shortened Warranty Period. Depend- ing on the product; there is either NO WARRANTY or a reduced warranty if the product is used for commercial, institutional, agricultural, industrial, income producing, or rental purposes. Please

refer to Exhibit A.

Husqvarna

3. Owner's (Your) Responsibilities. To preserve your rights under this Limited Warranty, you must demonstrate reasonable care and use of the product, including, following the preventative mainte-

nance, storage, fuel and oil usages as prescribed in the enclosed operator's manual. For example, the following items are the Owner's responsibility and are not covered by this Limited Warranty:

a. Set-up and pre-delivery service, and engine tune-ups.

b. Adjustments after the first (30) thirty days of purchase and beyond,

such as throttle cable, belt guides adjustments.

c. Preventative maintenance as outlined in the operator's manual.

In addition, you must cease using the product immediately upon any failure or damage.

The product should be taken to an authorized Husqvarna servicing dealer prior to any further use.

4. Damages resulting from normal aging, wear and tear or neglect are NOT covered. The Limited Warranty does not cover damage other than that resulting from defects in material or workmanship. The following are NOT considered defects in material or workmanship, and

therefore are NOT covered.

(a) Abrasion to mower decks; (b) Tires damaged by external punctures; (c) Natural discoloration of materials due to ultraviolet light;

(d) Damage to cutting equipment by way of contact with, rocks, or other non-approved materials

and/or structures;

In addition, this Limited Warranty does not cover damages, malfunctions or failures resulting from

abuse or neglect of the product related to or including any of the following:

(e) Failureto provide/perform required maintenance services as prescribed in theoperator's manual; (f) Abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, use of

unauthorized attachments, Lack of lubrication or engine failure, due to the use of oils that do not meet Engine manufacturer's specifications;

(g) Use of gasohol, containing methanol (wood alcohol). Gasohol which contains a maximum

10% ethanol (grain alcohol) or 15% MTBE (Methyl/Tertiary/Butyl/Ether) is approved; (h) Use of ether or any starting fluids; (i) Pressure cleaning or steam cleaning the product; (j) Use of spark plugs other than those meeting emission performance requirements listed inthe

operator's manual;

(k) Tampering with engine speed governor or emission components, or running engines above

specified and recommended engine speeds as listed in your operator's manual; (I) Operation of the unit with improperly installed/removed or modified cutting shields, guards, or

safety devices; (m)Any removed/damaged air filter, excessive dirt, abrasives, salt water, moisture, corrosion, rust,

varnish, stale fuel, or any adverse reaction due to incorrect storage procedures;

(n) Failures due to improper set up, pre-delivery service or repair service by anyone other than an

authorized Husqvarna servicing dealer during the warranty period; (o) Dirt contaminated grease or oil, use of incorrect type of greases or oils, failure to comply with

recommended greasing intervals, water or moisture damage, and/or improper storage; (p) Sprayers pumping or spraying caustic or flammable materials, lack of or broken strainers; or

(q) Continued use of product, after initial operational problem or failure occurs.

HOW TO OBTAIN SERVICE

5. Authorized Husqvarna Servicing Dealer/Center. In order to obtain warranty coverage it is your responsibility (at your expense) to deliver or ship your Husqvarna unit to an authorized Husqvarna

Servicing Dealer/Center and arrange for pick-up or return of your unit after the repairs have been made. If you do not know the location of your nearest authorized Husqvarna Servicing Dealer, call

Husqvarna, at 1-800-487-5951 during the hours of 8:00 AM to 8:00 PM Eastern Standard Time, or visit www.husqvarna.corn. Should you require assistance or have questions concerning this Limited Warranty, you may contact us at 1-800-487-5951 during the hours of 8:00 AM to 8:00 PM

Eastern Standard Time or contact us through the web at www.husqvarna.corn.

6. Documentation Required. You must maintain and present Proof of purchase (including date, product model and, if applicable, engine serial number) to an authorized Husqvarna Servicing

Dealer for warranty service under this Limited Warranty. Proof of purchase rests solely with the

owner-customer. Husqvarna encourages you to register your product online at www.husqvarna. corn to help ensure, among other things, that you can be notified of important product information.

However, registering your product is not a condition of warranty service.

Husqvarna Consumer Outdoor Products N.A., Inc.; Husqvama Professional Products, Inc.

9335 Harris Corners Parkway, Charlotte, NC 28269

5 575 49 43-01 R3 2010

ExhibitA Consumer (personal, Commercial (any commercial, Rental (any rental

Product/Component use, other than Rental Use)

Frame, Chassis, Front Axle 5 Years NO WARRANTY NO WARRANTY Engine* * * *

Transmission (if by HusqvarnalPeerless) 3 Years NO WARRANTY NO WARRANTY

Transmission (if third party) ........

Battery 1 Year Pro-rated NO WARRANTY NO WARRANTY

Engine* Transmission **

Battery

household use only) professional, institutional, usage)

arigculutral, or income producing

** NO WARRANTY NO WARRANTY

1 Year Pro-rated NO WARRANTY NO WARRANTY

3 Years NO WARRANTY NO WARRANTY

Engine* Transmission **

Battery Other Non-Expendable Components

** ** **

1 Year Pro-rated 1 Year Pro-rated NO WARRANTY

3 Years 1 Year NO WARRANTY

;L er

Engine* * * * Other Non-Expendable Components 2 Years 90 days 90 days

W,_kae r__:_1_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_1::::1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_::::_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_::::1_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_11_11_11_1_

Engine* * * * Battery 1 Year Pro-rated NO WARRANTY NO WARRANTY

Other Non-Expendable Components 2 Years NO WARRANTY NO WARRANTY

Sn _w ,Th ....

Engine* * * *

Engine* * * * Battery 1 Year Pro-rated NO WARRANTY NO WARRANTY

Other Non-Expendable Components 2 Years NO WARRANTY NO WARRANTY Tiller Tines *** NO WARRANTY NO WARRANTY

"Ho rs,,,:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::,,,,::i::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::,,,,

Engine* * * *

Engine* * * * Transmission 2 Years NO WARRANTY NO WARRANTY

Battery 1 Year Pro-rated NO WARRANTY NO WARRANTY Other Non-Expendable Components 2 Years NO WARRANTY NO WARRANTY

cu....

Battery 1 Year Pro-rated NO WARRANTY NO WARRANTY Other Non-Expendable Components 2 Years NO WARRANTY NO WARRANTY

Model Engine ....

5525PW: Pump / non-expendable parts 2 Years NO WARRANTY NO WARRANTY

All other Engine ....

Models: Pump / non-expendable parts 2 Years 2 Years NO WARRANTY

tots"

Engine* * * *

Other Non-Expendable Components* Parts Only) (2nd Year Parts Only) NO WARRANTY

•2 Years (2nd Year *2 Years-1365GN

Spreader ......................................................! ear.................................! Year....................!..........! Year.........

Mowers:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_::::::_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_'

Robotic Mower 2 Years 90 days 90 days Battery 1 Year 1 Year 1 Year

Pats"_AceSs i_

Accessories (e.g., grass catcher, bumper guard accessories, etc. 1 Year NO WARRANTY NO WARRANTY

Replacement parts and/or accessories

3rovided under this Limited Warranty are warranted only for the BALANCE of the warranty period applicable to the part or

accessory that was replaced. See to left See to left See to left

• £_e £_narat_ Fnain_ Manufac.fur_r'._ r_r Consumer Commercial Rental Manufacturer's warranty LCT Engines on specific Snow Throwers & Tillers, warranty through Husqvarna.

•* See reference 1 (b) of the warranty statement.

RZ - Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network. EZ - One (1) Year Commercial warranty, parts & labor, with Husqvarna.

Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network.

MZ - Two (2) Year Commercial warranty, parts & labor, with Hydro-Gear Distributor network.

..... Limited Lifetime Warranty" on Tiller tines is for the life of the product or 7 (seven) years after

the last date of the complete unit's final production, whichever comes first.

NO WARRANTY NO WARRANTY

Serial Number:

Date of Purchase:

Gasoline Capacity / Type: 1.5 Quarts (Unleaded Regular) Oil Capacity: 20 Ounces Oil Type (API SG-SL): SAE 30 (above 32°F); SAE 10W-30 (below 32°F)

Spark Plug: Champion RC12YC (Gap: .030") Blade Bolt Torque: 35-40 ft. Ibs.

, The model and serial numbers will be found on a decal on the rear of the lawn mower

housing. Record both serial number and date of purchase in space provided above.

These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Husqvarna retailers and

service centers. Some of these accessories may not apply to your lawn mower.

LAWN MOWER PERFORMANCE

CLIPPING

DEFLECTORS

FOR

REAR DISCHARGE

LAWN MOWERS

STABILIZER

_GAS

CANS

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS BLADES BLADE ADAPTERS WHEELS

GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

SPARK PLUGS

ENGINE OIL

Read these instructions and this manual in its entirety before you attempt to assemble or

operate your new lawn mower.

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.

Your new lawn mower has been assembled at the factory with the exception of those parts

left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct

tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc.,

necessary to complete the assembly have been placed in the parts bag.

TO REMOVE MOWER FROM CARTON

1. Remove loose parts included with mower.

TO ASSEMBLE GRASS CATCHER

1. Put grass catcher frame into grass bag

2. Cut down two end corners of carton and lay end panel down flat.

3. Remove aNpacking materials except padding between upper and lower handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold

them in warm water for a few minutes. If

bag gets wet, let it dry before using.

check carton thoroughly for additional loose parts.

HOW TO SET UP YOUR MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle sec- tion locks into place in mowing position.

2. Remove protective padding, raise up- per handle section into place on lower ;/

handle and tighten both handle knobs.

3. Remove handle padding holding operator presence control bar to upper handle.

Your lawn mower handle can be adjusted Vinyl for your mowing comfort. Refer to "AD-

JUST HANDLE" in the Service and Adjust-

ments section of this manual.

Operator MOWING

POSITION

control bar

I I ii \ _\

s /

i ii I

/iX

Upper

handle

bindings

TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be

used as a mulcher. To convert mower to bagging or discharging, see "TO CON-

VERT MOWER" in the Operation section of this manual.

with rigid part of bag on the bottom.

Make sure the frame handle is outside of the bag top.

Frame

opening

Handle

knob

Lower handle

KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING

YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for

future reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Drive control Operator presence control bar

Handle knob

Starter

handle

G rass catcher

Engine oil cap with dipstick

Muffle

Mulcher door

Housing

Gasoline filler cap

Spark plug

Air filter

Primer

Drive cover

Wheel adjuster (on each wheel)

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. MEETS CPSC SAFETY REQUIREMENTS

Our rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safety Com-

mission. The blade turns when the engine is running.

Operator presence control bar - must

be held down to the handle to start the

engine. Release to stop the engine.

Primer- pumps additional fuel from the

carburetor to the cylinder for use when starting a cold engine.

Starter handle - used for starting engine.

Mulcher door - allows conversion to

discharging or bagging operation.

Drive control lever = used to engage power-propelled forward motion of mower.

The operationofany

SAFETYG'ASSBlawnmowercan result

inforeign objectsthrown intothe eyes, which can

result in severe eye dam- age. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs.

We recommend a standard safety glasses or wide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for

optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_I,CAUTION" Federal regulations require an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any circumstances attempt to defeat the

function of the operator control. The blade turns when the engine is running. o Your lawn mower is equipped with an

operator presence control bar which requires the operator to be positioned

behind the lawn mower handle to start and operate the lawn mower.

Operator presence control bar

ENGAGE DRIVE

DRIVE CONTROL

CONTROL DISENGAGED

Drive control

lever

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may

become "loose", resulting in decreased

speed. There is a turnbuckle on the

underside of the drive control housing to increase tension on the drive cable. Pro-

ceed as follows:

1. Turn unit off and disconnect spark plug wire from spark plug.

2. Turn nut on underside of drive control to increase drive speed.

3. Operate mower to test drive speed.

Readjust as required.

4. If condition fails to improve after the

above steps (forward speed remains

the same), your drive belt is worn and

should be replaced.

DRIVE CONTROL

o Self-propelling is controlled by hold-

ing the operator presence control bar down to the handle and pulling the drive

control lever rearward to the handle. The farther toward the handle the lever

is pulled, the faster the unit will travel.

o Forward motion will stop when either

the operator presence control bar or drive control lever are released. To stop forward motion without stopping engine,

release the drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

NOTE: If after releasing the drive control

the mower will not roll backwards, push the mower forward slightly to disengage

drive wheels. o To keep drive control engaged when

turning corners, push down on the handle to lift the front wheels off the

ground while turning lawn mower.

Adjustment turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels

for high cut, adjust cutting height to suit your requirements. Medium position is

best for most lawns.

o To change cutting height, squeeze ad-

juster lever toward wheel. Move wheel

up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

LEVER BACKWARD

TO LOWER MOWER

Plate tab

LEVER FORWARD TO RAISE MOWER Lever

TO CONVERT MOWER

Your lawn mower was shipped ready to be

used as a mulcher. To convert to bagging

or discharging

REAR BAGGING

o Lift rear door of the lawn mower and

place the grass catcher frame hooks onto the door pivot pins.

o To convert to mulching or discharging

operation, remove grass catcher and close rear door.

Pivot pins Rear

Catcher frame hook

G rass

catcher

handle

SIDE DISCHARGING o Rear door must be closed.

o Open mulcher door and install dis-

charge deflector under door as shown.

o Mower is now ready for discharging

operation.

o To convert to mulching or bagging

operation, discharge deflector must be removed and mulcher door must be

closed.

\ \ /

MOWER IS NOW READY FOR DISCHARGING OPERATION

SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER

FOR MULCHING -

1. Rear door closed.

2. Mulcher door closed.

FOR REAR BAGGING -

1. Grass catcher installed.

2. Mulcher door closed.

FOR SIDE DISCHARGING -

1. Rear door closed.

2. Discharge deflector installed.

ACAUTION: Do not run your lawn

mower without rear door closed, clipping

deflector or approved grass catcher in

place. Never attempt to operate the lawn mower with the rear door removed or

propped open.

TO EMPTY GRASS CATCHER

1. Lift up on grass catcher using the frame handle.

2. Remove grass catcher with clippings from under lawn mower handle.

3. Empty clippings from bag.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Open mulcher door

Discharge deflector

Grass

catcher

frame

handle

BEFORE STARTING ENGINE

ADD OiL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to

use, see "ENGINE" in the Maintenance

section of this manual. & CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1. Be sure lawnmower is level.

2. Remove oil dipstick from oil fill spout.

3. You receive a container of oil with the unit. Slowly pour the entire container

down the oil fill spout into the engine.

NOTE: Initial oil fill requires only 18 oz.

due to residual oil in engine from the

manufacturers 100% quality testing. When

changing oil you may need 20 oz.

4. Insert and tighten dipstick.

iMPORTANT:

o Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

o Change the oil after every 25 hours of

operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE o Fill fuel tank to bottom of tank filler neck.

Do not overfill. Use fresh, clean, regular

unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline.

Purchase fuel inquantities that can be

used within 30 days to assure fuel fresh- ness.

_, CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

& CAUTION: Alcohol blended fuels

(called gasohol or using ethanol or metha- nol) can attract moisture which leads to

separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system

should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel

next season. See Storage Instructions for

additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Gasoline

filler cap

Engine

oil cap Primer

TO STOP ENGINE o To stop engine, release operator pres-

ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the

engine, a small amount of smoke may be

present during the initial use of the prod- uct and should be considered normal.

1. To start a cold engine, push primer three (3) times before trying to start.

Use a firm push. This step is not usually necessary when starting an

engine which has already run for a few minutes.

2. Hold operator presence control bar down to the handle and pull starter

handle quickly. Do not allow starter rope to snap back.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before

attempting to start and do not repeat

priming steps.

MOWING TiPS

_, CAUTION: Do not use de-thatcher

blade attachments on your mower. Such

attachments are hazardous, will damage your mower and could void your warranty.

* Under certain conditions, such as very

tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clip-

pings. It may also be necessary to re- duce ground speed and/or run the lawn

mower over the area a second time.

, For extremely heavy cutting, reduce the

width of cut by overlapping previously cut path and mow slowly.

, For better grass bagging and most cut-

ting conditions, the engine speed should be set in the FAST position.

, Pores in cloth grass catchers can be-

come filled with dirt and dust with use and catchers will collect less grass. To

prevent this, regularly hose catcher off with water and let dry before using.

, Keep top of engine around starter clear

and clean of grass clippings and chaff. This will help engine air flow and extend engine life.

MULCHING MOWING TIPS

iMPORTANT: For best performance,

keep mower housing free of built-up grass and trash. See "CLEANING" in the

Maintenance section of this manual. , The special mulching blade will recut

the grass clippings many times and reduce them in size so that as they fall

onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade)

speed as this will provide the best recut- ting action of the blades.

, Avoid cutting your lawn when it iswet.

Wet grass tends to form clumps and interferes with the mulching action. The

best time to mow your lawn is the early afternoon. At this time the grass has dried, yet the newly cut area will not be

exposed to direct sunlight.

, For best results, adjust the lawn mower

cutting height so that the lawn mower cuts off only the top one-third of the

grass blades. If the lawn is overgrown it

will be necessary to raise the height of

cut to reduce pushing effort and to keep from overloading the engine and leaving

clumps of mulched grass. For extremely heavy grass, reduce your width of cut by overlapping previously cut path and

mow slowly.

MAX 1/3

, Certain types of grass and grass

conditions may require that an area be mulched a second time to completely hide the clippings. When doing a sec-

ond cut, mow across (perpendicular) to the first cut path.

, Change your cutting pattern from week

to week. Mow north to south one week then change to east to west the next

week. This will help prevent matting and

graining of the lawn.

MAINTENANCE BEFORE

EACH

SCHEDULE USE

Check for Loose Fasteners

MLClean /Inspect Grass Catcher *

_ Check Tires

N Check Drive Wheels *** if

Clean Lawn Mower ....

M Clean under Drive Cover ***

O Check Drive Belt / Pulleys *** _ Check / Sharpen / Replace Blade

R Lubrication

Clean and Recharge Battery ** Check Engine Oil level

!= Change Engine Oil N Clean Air Filter

Inspect Muffler

INI Replace Spark Plug IE Replace Air Filter Paper Cartridge

Empty fuel system or add Stabilizer

* (if so equipped)

** Electric-Start mowers

*** Power-Propelled mowers

**** Use a scraper

to clean under deck

1 - Change more often if operating under a heavy load or in high outdoor temperatures. 2 - Service more often if operating in dirty or dusty conditions. 3 - Replace blades more often when mowing in sandy soil.

4 - Charge 48 hours at end of season. 5 - And after each 5 hours of use.

AFTER EVERY EVERY EVERY

EACH 10 25 HOURS 100

USE HOURS OR SEASON HOURS STORAGE

BEFORE

v' _"

t/ v'

v' v'3

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive

full value from the warranty, operator must

maintain unit as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your unit.

At least once a season, check to see if you should make any of the adjustments

described in the Service and Adjustments section of this manual.

, At least once a year, replace the spark

plug, clean or replace air filter element and check blade for wear. A new spark

plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer.

, Follow the maintenance schedule in this

manual.

BEFORE EACH USE

, Check engine oil level. , Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRICATION CHART").

LUBRICATION CHART

(_Wheel

adjuster(on

each wheel)

(_ Engine oil

Mulcher

door hinge

(_ Rear door

(_ Handle bracket mounting pins

_ Spray lubricant

See "ENGINE" in Maintenance section.

IMPORTANT: Do not oil or grease plastic wheel bearings. Viscous lubricants will

attract dust and dirt that will shorten the life of the self-lubricating bearings. Ifyou feel they

must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

hinge

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

Blade adapter

Lockwasher

Key Crankshaft

TIRES , Keep tires free of gasoline, oil, or insect

control chemicals which can harm rubber.

, Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

DRIVE WHEELS Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel

area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1. Remove hubcaps, Iocknuts & washers.

2. Remove wheels from wheel adjusters.

3. Remove any trash or grass cuttings

from inside the dust cover, pinion and/ or drive wheel gear teeth.

4. Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a Husqvarna or

other qualified service center.

BLADE CARE

For best results, blade must be kept sharp. Replace a bent or damaged blade. A CAUTION" Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved

by the manufacturer of your mower is haz- ardous, could damage your mower and

void your warranty. TO REMOVE BLADE

1. Disconnect spark plug wire from spark plug and place wire where it cannot

come in contact with plug.

2. Turn lawn mower on its side. Make sure air filter and carburetor are up.

3. Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt.

NOTE: Protect your hands with gloves

and/or wrap blade with heavy cloth.

4. Remove blade bolt by turning counter- clockwise.

5. Remove blade & attaching hardware (bolt, lock washer & hardened washer).

Blade

Blade / bolt Hardened

washer Trailing edge Crankshaft

TO REPLACE BLADE

f \

1. Position blade on the blade adapter aligning the two (2) holes in the blade

with the raised lugs on the adapter.

2. Be sure the trailing edge of blade (op- posite sharp edge) is up toward the

engine.

3. Install the blade bolt with the lock

washer and hardened washer into

blade adapter and crankshaft.

4. Use block of wood between blade and lawn mower housing and tighten the

blade bolt, turning clockwise.

Recom mended tightening torque: 35-40 ft.Ibs. IMPORTANT: Blade bolt is heat treated.

If bolt needs replacing, replace only with

approved bolt shown in the Repair Parts section of this manual.

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening the blade - but if you do, be sure the

blade is balanced. Care should be taken

to keep the blade balanced. An unbal- anced blade will cause eventual damage to mower or engine.

, The blade can be sharpened with a file

or on a grinding wheel. Do not attempt to sharpen while on the mower.

, To check blade balance, drive a nail into

a beam or wall. Leave about one inch of the straight nail exposed. Place center

hole of blade over the head of the nail.

If blade is balanced, it should remain in

a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

GRASS CATCHER

The grass catcher may be hosed with

water, but must be dry when used.

Check your grass catcher often for dam- age or deterioration. Through normal use it will wear. If catcher needs replac- ing, replace only with approved replace-

ment catcher shown in the Repair Parts section of this manual. Give the lawn

mower model number when ordering.

GEAR CASE

o To keep your drive system working

properly, the gear case and area around the drive should be kept clean and free

of trash build-up. Clean under the drive cover twice a season.

o The gear case is filled with lubricant to

the proper level at the factory. The only time the lubricant needs attention is if

service has been performed on the gear case.

o If lubricant is required, use only Texaco

Starplex Premium 1 Grease, Part No.

750369. Do not substitute.

ENGINE

LUBRICATION Use only high quality detergent oil rated

with API service classification SJ-SL. Select the oil's SAE viscosity grade

according to your expected operating temperature.

SAE ViSCOSiTY GRADES

°F -20 0 20 32 40 60 80 1(_0

oc- o _to _1:o o 1:o 2:0 3:0 4o

TEMPERATURE RANGE EXPECTED BEFORE NEXT OIL CHANGE

Change the oil after every 25 hours of operation or at least once a year if the

lawn mower is not used for 25 hours in

one year. Check the crankcase oil level before

starting the engine and after each five (5)

hours of continuous use. Tighten oil plug

securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to

drain oil, empty fuel tank by running en- gine until fuel tank is empty.

1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2. Remove engine oil cap; lay aside on a clean surface.

3. Tip lawn mower on its side as shown and drain oil into a suitable container.

Rock lawn mower back and forth to re-

move any oil trapped inside of engine.

Container "- ........."

4. Wipe off any spilled oil from lawn mower or side of engine.

5. Slowly pour oil down the oil fill spout, stopping every few ounces to check

the oil level with the dipstick.

6. Stop adding oil when you reach the FULL mark on the dipstick. Wait a

minute to allow oil to settle.

7. Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or

engine will smoke heavily from the muffler on startup.

8. Always be sure to retighten oil dipstick before starting engine.

9. Reconnect spark plug wire to spark plug.

AIR FILTER Your engine will not run properly and may

be damaged by using a dirty air filter. Replace the air filter every 100 hours of

operation or every season, whichever oc- curs first. Service air cleaner more often

under dusty conditions.

TO CLEAN AIR FILTER

1. Remove cover.

2. Carefully remove cartridge.

3. Clean by gently tapping on a flat sur-

face. If very dirty, replace cartridge.

,ACAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration

of the cartridge. Do not oil cartridge. Do

not use pressurized air to clean or dry

cartridge.

4. Install cartridge, then replace cover.

+ 36 hidden pages