Husqvarna 917374142 User Manual

Get it fixed, at your home or ours!

Owner’s Manual

Your Home

For repair – in your home –ofall major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner’s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances and items like garage door openers and water heaters.

1-800-4-MY-HOME

(1-800-469-4663) (U.S.A. and Canada)

www.sears.com www.sears.ca

Anytime, day or night

Our Home

For repair of carry-in products like vacuums, lawn equipment,

and electronics, call or go on-line for the nearest

Sears Parts and Repair Center.

1-800-488-1222

To purchase a protection agreement (U.S.A.)

or maintenance agreement (Canada) on a product serviced by Sears:

1-800-827-6655

Anytime, day or night (U.S.A. only)

www.sears.com

(U.S.A.)

1-800-361-6665

(Canada)

ROTARY LAWN MOWER

173cc Kohler Engine Power-Propelled 21" Multi-Cut

Model No.

917.374142

Product No.

7021RD

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

(1-888-784-6427)

® Registered Trademark / ® Marca Registrada /

Marque de commerce /MDMarque déposée de Sears Brands, LLC

432806 04.08.10 BY Printed in U.S.A.

Trademark /SMService Mark of Sears Brands, LLC

Marca de Fábrica /SMMarca de Servicio de Sears Brands, LLC

Au Canada pour service en français:

1-800-LE-FOYER

(1-800-533-6937)

www.sears.ca

• Español, p. 20

CAUTION:

Read and follow all Safety Rules and In struc tions before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman website: www.sears.com/craftsman

TABLE OF CONTENTS

Safe ty Rules..........................................2-3

Warranty...................................................4

Prod uct Spec i ﬁ ca tions.............................. 5

Assembly / Pre-Operation ........................6

Op er a tion.............................................7-11

Maintenance Sched ule...........................12

Maintenance......................................12-15

Ser vice and Ad just ments...................15-16

Stor age..............................................17-18

Trou ble shoot ing .................................18-19

Re pair Parts.......................................38-47

SAFETY RULES

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing ob-

jects. Failure to observe the following safety instructions could result in serious injury or death.

Look for this symbol to point out im por tant safety precautions. It means CAU TION!!! BECOME ALERT!!! YOUR SAFE TY IS INVOLVED.

WARN ING : In order to prevent ac ci den tal starting when setting up, trans port ing, ad just ing or making repairs, always dis con nect spark plug wire and place wire where it can not come in contact with plug.

WARNING: Engine exhaust, some of its constituents, and certain vehicle com po nents contain or emit chem i cals known to the State of Cal i for nia to cause can cer and birth defects or oth er re pro duc tive harm.

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of Cal i for nia to cause can cer and birth defects or oth er re pro duc tive harm. Wash

hands after handling.

CAUTION: Mufﬂ er and other engine

parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

I. GENERAL OPERATION

• Read, understand, and follow all

in struc tions on the machine and in the

manual(s) before starting. Be thor ough ly

familiar with the controls and the proper

use of the machine before starting.

• Do not put hands or feet near or under

rotating parts. Keep clear of the dis-

charge opening at all times.

• Only allow responsible individuals, who

are familiar with the in struc tions, to

operate the machine.

• Clear the area of objects such as rocks,

toys, wire, bones, sticks, etc., which could

be picked up and thrown by blade.

• Be sure the area is clear of other people

before mowing. Stop the ma chine if

anyone enters the area.

• Do not operate the mower when bare foot or wearing open sandals. Al ways wear substantial foot wear.

• Do not pull mower backwards unless absolutely nec es sary. Always look down and behind before and while moving backwards.

• Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may richochet back toward the operator. Stop the blade when crossing gravel surfaces.

• Do not operate the mower without proper guards, plates, grass catcher or oth er safety protective devices in place.

• See manufacturer’s instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer.

• Stop the blade(s) when crossing grav el drives, walks, or roads.

• Stop the engine (motor) whenever you leave the equip ment, before clean ing the mower or unclogging the chute.

• Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

• Mow only in daylight or good artiﬁ cial light.

• Do not operate the machine while under the inﬂ uence of alcohol or drugs.

• Never operate machine in wet grass. Always be sure of your footing: keep a ﬁ rm hold on the handle; walk, never run.

• Disengage the self-propelled mech a nism or drive clutch on mowers so equipped before starting the engine.

• If the equipment should start to vi brate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

• Always wear safety goggles or safe ty glasses with side shields when op er at ing mower.

II. SLOPE OPERATION

Slopes are a major factor related to slip & fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

KOHLER 4-CYCLE ENGINE

FUEL SYSTEM

PART NO. QTY DESCRIPTION

14 065 22-S 1 Tank, Fuel (Xenoy) 24 086 12-S 2 Screw 14 227 07-S 1 Cap Assembly, Fuel (EVAP, Canister) 25 111 40-S 2 Hose, Fuel (Low Permeation) 14 237 01-S 4 Clamp, Hose 14 112 13-S 1 Spacer, Carburetor 14 187 01-S 1 Arm Assembly 25 086 277-S 2 Screw, Thread Forming, M4 14 853 17-S 1 Carburetor, Auto Choke (-B, without Shutoff) 14 268 04-S 1 Diaphragm Assembly 25 086 275-S 2 Screw, Shoulder

MODEL NUMBER XT173-3225-EA

EXHAUST

PART NO. QTY DESCRIPTION

14 068 05-S 1 Mufﬂ er Assembly 14 314 04-S 1 Guard Assembly, Mufﬂ er 14 041 22-S 1 Gasket,mufﬂ er 14 100 09-S 2 Nut, Hex, Flangelock (M6)

ENGINE CONTROLS

PART NO. QTY DESCRIPTION

14 154 01-S 1 Clip, Governor Arm 14 079 17-S 1 Linkage, Auto Choke 14 126 22-S 1 Control Assembly, Fixed Speed 14 089 14-S 1 Spring, Extension (Governor) 14 089 07-S 1 Spring, Linkage 14 090 12-S 1 Lever, Governor 25 086 166-S 1 Screw, Retangle Head (M6) 25 086 159-S 2 Screw, Hex Flange (M6)

KOHLER 4-CYCLE ENGINE

FUEL SYSTEM

14 326 05-S

14 154 04-S

14 163 01-S

14 173 06-S

14 050 13-S

14 100 09-S

24 072 06-S

14 187 01-S 14 187 03-S

14 227 07-S

M-641060-S

EXHAUST

M-641060-S

14 041 22-S

14 313 04-S

14 126 14-S

14 462 01-S

14 126 18-S

14 326 06-S

14 050 16-S 14 050 04-S

14 237 03-S

25 111 40-S

25 086 277-S

14 314 04-S 14 314 09-S

HEAD/ VALVE/ BREATHER

14 237 03-S

HEAD/VALVE

BREATHER

14 065 22-S

14 227 06-S

14 237 01-S

14 079 17-S

14 065 12-S 14 065 24-S

14 126 16-S

25 111 40-S

24 072 06-S

14 853 26-S 14 853 23-S 14 853 25-S 14 853 15-S

14 068 01-S 14 068 05-S 14 068 07-S 14 068 08-S

USE 14 065 24-S

14 065 10-S

14 227 04-S

25 050 07-S

14 853 01-S 14 853 02-S 14 853 05-S 14 853 22-S 14 853 24-S 14 853 27-S 14 853 17-S

14 536 11-S

14 065 01-S 14 065 08-S

14 237 01-S

14 237 05-S

14 112 09-S 14 112 13-S

14 227 04-S 14 227 11-S

14 536 12-S

MODEL NUMBER XT173-3225-EA

14 089 07-S

14 090 04-S 14 090 12-S

25 086 166-S

14 089 14-S 14 089 05-S 14 089 32-S 14 089 34-S

14 536 07-S 14 536 08-S

ENGINE CONTROLS

14 079 01-S

14 536 03-S 14 536 06-S

25 086 165-S

14 237 04-S 14 237 07-S

14 237 05-S

EXHAUST

14 050 14-S

14 237 04-S 14 237 07-S

25 111 34-S

25 086 275-S

14 268 04-S

14 041 05-S 14 041 24-S

14 536 13-S

M-641060-S

14 126 11-S 14 126 22-S

14 089 33-S

14 079 02-S 14 079 04-S 14 079 15-S

14 536 14-S

DO:

• Mow across the face of slopes: nev er up and down. Exercise extreme caution when changing direction on slopes.

• Remove obstacles such as rocks, tree limbs, etc.

• Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

• Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

• Do not trim excessively steep slopes.

• Do not mow on wet grass. Reduced footing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the op er a tor is not alert to the presence of children. Children are often attracted to the ma chine and the

Never

mowing activity.

assume that children

will remain where you last saw them.

• Keep children out of the trimming area and under the watchful care of an oth er re spon si ble adult.

• Be alert and turn machine off if chil dren enter the area.

• Before and while walking back wards,

down

look behind and

for small chil dren.

• Never allow children to operate machine.

• Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely ﬂ ammable and the vapors are explosive.

• Extinguish all cigarettes, cigars, pipes and other sources of ignition.

• Use only an approved container.

• Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

• Never refuel the machine indoors.

• Never store the machine or fuel container where there is an open ﬂ ame, spark or pilot light such as a water heater or on other appliances.

• Never ﬁ ll containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before ﬁ lling.

• Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

• Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

• If fuel is spilled on clothing, change clothing immediately.

• Never overﬁ ll fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE

• Never run machine inside a closed area.

• Never make adjustments or repairs with the engine (motor) running. Dis con nect the spark plug wire, and keep the wire away from the plug to prevent ac ci den tal starting.

• Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

• Never tamper with safety devices. Check their proper operation reg u lar ly.

• Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

• Stop and inspect the equipment if you strike an object. Repair, if nec es sary, before restarting.

• Never attempt to make wheel height adjustments while the engine is running.

• Grass catcher components are sub ject to wear, dam age, and de te ri o ra tion, which could expose moving parts or allow objects to be thrown. Frequently check com po nents and replace with man u fac tur er’s recommended parts, when necessary.

• Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when ser vic ing them.

• Do not change the engine governor setting or overspeed the engine.

• Maintain or replace safety and instruction labels, as necessary.

WARNING: This lawn mower is equipped with an internal com bus tion engine and

should not be used on or near any un im proved forest-covered, brush-covered or grass-cov ered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the mufﬂ er is available through your nearest Husqvarna or other authorized service center (See the REPAIR PARTS section of this manual).

WARRANTY

KOHLER 4-CYCLE ENGINE

MODEL NUMBER XT173-3225-EA

SECTION 1: LIMITED WARRANTY

Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below:

2 YEAR NON-COMMERCIAL WARRANTY: Automatic Mower, Riding lawn mowers, yard and garden tractors, walk behind mowers, tillers, chain saws, trimmers, brushcutters, clearing saws, snow blowers, handheld blowers, backpack blowers, hedge trimmers, electrical products and power-assist collection systems for non com mer cial, nonprofessional, noninstitutional or nonincome producing use, except as herein stated.

Emission control system components necessary to comply with CARB-TIER-II and EPA regulations.

Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. Normal wear, tear or abuse is not covered under warranty. Product must be returned to Charlotte with a warranty claim form. All care and maintenance instructions must be followed as stated by the manufacturer on the care label. The ﬁ t of the protective apparel/boot is not covered under warranty.

SECTION 2: HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY Husqvarna will repair or replace defective components without charge for parts or labor if a component fails because of a defect in material or workmanship during the warranty period.

SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY The following items are not covered by this warranty: (1)Normal customer maintenance items which become

worn through normal regular use, including, but not limited to, belts, blades, blade adapters, bulbs, ﬁ lters, guide bars, lubricants, rewind springs, saw chain, spark plugs, starter ropes and tines;

(2) Natural discoloration of material due to ultraviolet

light;

(3) Lawn and garden attachments are covered by a

third party which gives a warranty, all claims for warranty should be sent to the manufacturer; and

(4)Emission Control System components necessary

to which are manufactured by third party engine manufacturer.

SECTION 4: EXCEPTIONS AND LIMITATIONS This warranty shall be inapplicable to defects resulting from the following: (1) Accident, abuse, misuse, negligence and neglect,

including stale fuel, dirt, abrasives, moisture, rust, corrosion, or any adverse reaction due to incorrect storage or use habits;

(2) Failure to operate or maintain the unit in accor-

dance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna;

(3) Alterations or modiﬁ cations that change the

intended use of the product or affects the product’s performance, operation, safety, or durability, or causes the product to fail to comply with any applicable laws; or:

(4) Additional damage to parts or components due to

continued use occurring after any of the above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PUR CHAS ER. HUSQVARNA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RE SERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NO TICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PROD UCTS.

Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

SECTION 5: CUSTOMER RESPONSIBILITIES The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the maintenance section of the Owner’s/ Operator’s manual. Should an operational problem or failure occur, the product should not be used, but delivered as is to an authorized Husqvarna dealer for evaluation. Proof of purchase, as explained in section 6, rests solely with the customer.

SECTION 6: PROCEDURE TO OBTAIN WARRANTY CONSIDERATION It is the Owner’s and Dealer’s responsibility to make certain that the Warranty Registration Card is properly ﬁ lled out and mailed to Husqvarna Forest & Garden Company. This card should be mailed within ten (10) days from the date of purchase in order to conﬁ rm the warranty and to facilitate post-sale service.

Proof of purchase must be presented to the authorized Husqvarna dealer in order to obtain warranty service. This proof must include date purchased, model number, serial number, and complete name and address of the selling dealer.

To obtain the beneﬁ t of this warranty, the product believed to be defective must be delivered to an authorized Husqvarna dealer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be delivered at the owner’s expense. Pick-up and delivery charges are not covered by this warranty. An authorized Husqvarna dealer can be normally located through the “Yellow Pages” of the local telephone directory or by calling 1-800-HUSKY62 for a dealer in your area.

HUSQVARNA

9335 Harris Corners Parkway

Charlotte, NC 28269 531 83 81-23 2002

HEAD / VALVE / BREATHER

PART NO. QTY DESCRIPTION

14 318 01-S 1 Head Assembly, Cylinder 14 146 01-S 1 Plate, Pushrod Guide 14 018 02-S 2 Retainer, Valve Spring 14 017 01-S 1 Valve, Intake 14 032 08-S 1 Seal, Valve Stem 14 016 01-S 1 Valve, Exhaust 14 100 01-S 2 Nut, Hex Jam (M6) 14 599 01-S 2 Pivot, Rocker Arm 14 186 02-S 2 Arm, Rocker 14 072 02-S 2 Stud, Rocker Arm 14 411 01-S 2 Rod, Push 14 096 05-S 1 Cover, Valve 14 041 01-S 1 Gasket, Valve Cover 25 086 159-S 4 Screw, Hex Flange (M6) 25 086 140-S 4 Screw, Hex Flange (M8) 14 841 04-S 1 Gasket, Cylinder Head 24 072 06-S 2 Stud, Carburetor (M6) 14 041 24-S 1 Gasket, Carburetor, Heat Shield 14 072 06-S 2 Stud, Exhaust (M6)

DECALS

PART NO. QTY DESCRIPTION

14 113 03-S 1 Decal, Warning 14 450 02-S 1 Tag, Hang

STARTING SYSTEM

PART NO. QTY DESCRIPTION

14 165 01-S 1 Starter Assembly (with Handle) M-641060-S 1 Nut, Hex Flange (M6)

KOHLER 4-CYCLE ENGINE

HEAD/VALVE/BREATHER

24 072 06-S

25 086 140-S

14 032 08-S

14 018 02-S

14 072 02-S

14 100 01-S

14 096 05-S

14 041 01-S

14 096 60-S

25 086 159-S

14 100 01-S

14 089 02-S

14 186 02-S

14 599 01-S

Valve Seal also included in Gasket Set.

14 018 02-S

14 072 02-S

14 599 01-S

14 032 08-S

14 380 06-S

14 318 01-S

14 411 01-S

14 146 08-S

14 186 02-S

24 072 06-S

14 089 02-S

14 017 02-S 14 016 02-S

14 841 04-S

14 017 01-S

14 380 06-S

14 411 01-S

Intake & Exhaust Valves available separately.

14 016 01-S

MODEL NUMBER XT173-3225-EA

STARTING SYSTEM

M-641060-S

14 112 09-S 14 112 13-S

14 755 02-S

14 041 05-S 14 041 24-S

14 165 01-S 14 165 03-S 14 165 06-S * 14 165 09-S *

PRODUCT SPECIFICATIONS

Serial Number: Date of Purchase: Gasoline Capacity / Type: 1.5 Quarts (Unleaded Regular) Oil Capacity: 20 Ounces Oil Type (API SG–SL): SAE 30 (above 32°F); SAE 10W-30 (below 32°F) Spark Plug: Champion RC12YC (Gap: .030") Blade Bolt Torque: 35–40 ft. lbs.

• The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above.

ACCESSORIES

These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Husqvarna retailers and

service centers. Some of these accessories may not apply to your lawn mower.

DECALS

14 450 02-S

41 037 10-S

14 113 02-S 14 113 07-S 14 113 17-S 14 113 08-S 14 113 15-S 14 113 16-S 14 113 43-S 14 113 52-S

25 113 39-S

14 113 18-S 14 113 21-S 14 113 42-S

WARNING

14 113 03-S 14 113 57-S

14 113 04-S 14 113 20-S 14 113 23-S 14 113 40-S 14 113 54-S

14 113 53-S

14 112 56-S 25 113 58-S

14 160 01-S 14 160 03-S (n/a on *)

14 379 01-S

BLOWER HOUSING

& BAFFLES

14 098 01-S 14 098 04-S 14 098 05-S

IGNITION/ELECTRICAL

ASSEMBLY / PRE-OPERATION

Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts bag. To ensure safe and proper operation of your lawn mow er, all parts and hard ware you assemble must be tightened se cure ly. Use the correct tools as necessary to ensure proper tightness.

TO RE MOVE MOW ER FROM CAR TON

1. Remove loose parts included with mower.

2. Cut down two end corners of carton and lay end panel down ﬂ at.

3. Remove all packing materials ex cept padding be tween upper and lower handle and padding holding operator presence control bar to upper handle.

4. Roll lawn mower out of carton and check carton thorougly for ad di tion al loose parts.

HOW TO SET UP YOUR MOW ER

TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so

as not to pinch or damage con trol cables.

1. Raise lower handle section to operating position and squeeze the bottom ends of lower handle towards each other until the pin in handle can be inserted into one of the three height adjustment holes.

2. Remove protective padding, raise upper handle sec tion into place on lower handle and tighten both handle knobs.

3. Remove any packing material from around control bar.

Your lawn mower handle can be adjusted for your mowing comfort. Refer to “AD JUST HANDLE” in the Service and Adjustments section of this manual.

Operator presence control bar

LIFT

LIFT UP

MOWING

POSITION

Upper

handle

Handle

knob

Lower handle

SQUEEZE

Handle bracket

TO ASSEMBLE GRASS CATCH ER

1. Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top.

2. Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.

Vinyl bindings

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CON VERT MOWER” in the Operation section of this manual.

Handle pin

Frame

handle

Frame

opening

KOHLER 4-CYCLE ENGINE

BLOWER HOUSING & BAFFLES

PART NO. QTY DESCRIPTION

14 027 03-S 1 Housing, Blower 14 096 27-S 1 Cover, Engine (Black) M-641060-S 3 Nut, Hex Flange (M6) 25 086 167-S 4 Screw, #15, 6-Lobe Drive, Pan Head (Hi-Low Thread) 14 332 04-S 1 Insert, Engine Cover

AIR INTAKE / FILTRATION

PART NO. QTY DESCRIPTION

14 123 05-S 1 Hose, Breather M-641060-S 2 Nut, Hex Flange (M6) 14 094 13-S 1 Base, Air Cleaner 14 096 51-S 1 Cover, Air Cleaner Base (Breather Gas) M-641060-S 2 Nut, Hex Flange (M6) 14 096 09-S 1 Cover, Air Cleaner 14 083 01-S 1 Element, Air Filter 41 037 10-S 1 Nameplate Ticket

IGNITION / ELECTRICAL

PART NO. QTY DESCRIPTION

12 132 02-S 1 Spark Plug (K5RTC) 14 025 02-S 1 Flywheel Assembly, Aluminum 14 100 10-S 1 Nut, Flywheel (with Serrations) 14 157 01-S 1 Fan, Flywheel (Plastic) 14 109 02-S 1 Cup, Starter Drive 14 072 13-S 1 Stud, Blower Housing (Ignition) 14 072 12-S 2 Stud, Blower Housing (Fuel Tank) 14 112 07-S 3 Spacer, Compression Limiter 14 584 05-S 1 Module, Ignition (Aluminum Flywheel) 14 050 04-S 1 Filter, Fuel Vapor 25 086 145-S 1 Screw, Hex Flange (M6) 14 219 07-S 1 Brake Assembly 25 086 159-S 2 Screw, Hex Flange (M6) 14 314 01-S 1 Guard, Finger 25 086 159-S 2 Screw, Hex Flange (M6)

MODEL NUMBER XT173-3225-EA

OIL PAN / LUBRICATION

PART NO. QTY DESCRIPTION

14 199 06-S 1 Pan, Oil 25 086 159-S 1 Screw, Hex Flange (M6) 14 032 07-S 1 Oil Seal 14 041 06-S 1 Gasket, Oil Pan 25 086 161-S 6 Screw, Hex Flange (M8) 14 123 13-S 1 Tube Assembly, Oil Fill 25 086 145-S 1 Screw, Hex Flange (M6)

CRANKCASE

PART NO. QTY DESCRIPTION

14 032 02-S 1 Seal, Oil 14 468 07-S 1 Washer, Flat (13mm O.D.) 14 032 04-S 1 Seal, Oil 14 050 01-S 1 Gasket, Breather Cover 25 086 159-S 2 Screw, Hex Flange (M6) 14 067 01-S 1 Rod Assembly, Connecting 14 018 03-S 2 Retainer, Piston Pin 25 086 145-S 1 Screw, Hex Flange (M6) 14 380 06-S 2 Pin, Dowel (10mm)

CRANKSHAFT

PART NO. QTY DESCRIPTION

14 014 47-S 1 Crankshaft Assembly 14 340 01-S 1 Key, Woodruff

KOHLER 4-CYCLE ENGINE

BLOWER HOUSING & BAFFLES

25 086 167-S

14 332 05-S 14 332 04-S 14 332 09-S 14 332 10-S

14 096 60-S 14 096 63-S

(with Starter

14 165 06-S

or 15 165 09-S)

(with Starter 14 165 01-S or 15 165 03-S)

41 037 10-S

14 326 04-S

14 219 03-S

IGNITION/ELECTRICAL

14 094 12-S 14 094 13-S

14 390 04-S

14 219 01-S

14 096 04-S 14 096 10-S 14 096 1 14 096 12-S 14 096 13-S 14 096 14-S 14 096 24-S 14 096 31-S 14 096 26-S 14 096 27-S 14 096 28-S

14 094 15-S 14 094 16-S

25 086 145-S

14 584 05-S 12 132 02-S

14 584 01-S

14 584 04-S

14 584 02-S

14 314 01-S

M-641060-S

1-S

14 096 08-S 14 096 51-S

25 086 293-S

M-641060-S

14 025 04-S 14 025 05-S

14 123 01-S 14 123 05-S

14 112 07-S

14 072 13-S

14 025 01-S

14 270 01-S

14 085 02-S

14 096 09-S 14 096 30-S

14 126 37-S

14 027 01-S 14 027 03-S

AIR INTAKE/FILTRATION

14 083 01-S 14 083 09-S

14 083 02-S

14 072 12-S

14 100 02-S 14 100 10-S

14 109 02-S

14 157 01-S

14 025 02-S

14 314 07-S

14 219 07-S 14 219 11-S

14 099 07-S

MODEL NUMBER XT173-3225-EA

OIL PAN/LUBRICATION

14 010 06-S

14 067 01-S

14 123 13-S 14 123 14-S

14 153 05-S

14 153 03-S

25 086 161-S

25 086 159-S

14 050 01-S

14 486 07-S

14 154 01-S

14 014 04-S 14 014 08-S 14 014 10-S 14 014 12-S 14 014 14-S 14 014 24-S 14 014 26-S 14 014 33-S 14 014 37-S 14 014 81-S 14 014 93-S 14 014 47-S 14 014 87-S 14 014 109-S

14 199 03-S 14 199 06-S

14 032 04-S

25 086 145-S

14 081 06-S

14 032 05-S 14 032 07-S

CRANKCASE

14 032 02-S

14 380 06-S

CRANKSHAFT

14 340 01-S

17 030 12-S

14 123 04-S 14 123 11-S

14 153 01-S

14 153 03-S

25 086 159-S

14 018 03-S

OPERATION

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OP ER AT ING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning.

Drive control lever

Starter handle

Grass catcher

Single point height adjuster handle

Engine oil cap with dipstick

Mufﬂ er

Mulcher door

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safety Com mis sion. The blade turns when the engine is running.

Operator presence control bar – must be held down to the handle to start the engine. Release to stop the engine. Starter handle – used for starting engine.

Operator presence control bar

Handle knob

Drive cover

Gasoline ﬁ ller cap

Air ﬁ lter

Housing

Spark plug

Mulcher door – allows con ver sion to discharging or bagging operation. Drive control lever – used to engage power-pro pelled forward mo tion of mower.

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can

result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any ad just ments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

CAUTION: Federal regulations re quire

an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not un der any circumstances attempt to de feat the func tion of the operator con trol. The blade turns when the engine is running.

• Your lawn mower is equipped with an

operator pres ence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower.

DRIVE CONTROL

• Self-propelling is controlled by hold-

ing the operator presence control bar down to the handle and pulling the drive control lever rearward to the handle. The farther toward the handle the lever is pulled, the faster the unit will travel.

• Forward motion will stop when either

the operator presence control bar or drive control lever are released. To stop forward motion without stop ping engine, re lease the drive control lever only. Hold op er a tor presence control bar down against handle to con tin ue mowing without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

Operator presence control bar

ENGAGE

DRIVE

CONTROL

Drive control

lever

DRIVE

CONTROL

DISENGAGED

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become “loose”, resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Pro ceed as follows:

1. Turn unit off and disconnect spark plug wire from spark plug.

2. Rotate turnbuckle on drive control to increase drive speed.

3. Operate mower to test drive speed. Readjust as required.

4. If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be re placed.

Adjustment turnbuckle

TO ADJUST CUTTING HEIGHT

All four wheels are adjusted by a single lever.

• Pull adjuster lever toward wheel. To

raise mower, move lever forward to desired position. To lower mow er, move the lever toward the rear.

LEVER BACKWARD TO LOWER MOWER

Height adjuster lever

LEVER FORWARD TO RAISE MOWER

24 17060410 Screw, Tapping, Hex Head 1/4-20 x 3/4

25 199775X418 Cover Drive

26 750634 Screw, Threaded, Rolled #10-25 x .50

28 12000058 E-Ring 7/16

29 189403 Cover, Dust, Wheel

31 404845 Pawl

32 405746X460 Wheel & Tire Assembly, Rear 8 x 1-3/4

33 409148 Nut, Flangelock 3/8-16

34 851226 Washer

35 403102X004 Shaft Assembly, Rear

36 407175X004 Shaft Assembly, Front

37 161463 Retainer, Front Shaft

38 163409 Screw #12 x 5/8

39 407059 Bolt, Shoulder, Semi-Gimlett Point

40 401273X460 Wheel & Tire Assembly, Front 8 x 1-3/4

41 404835 Pinion

42 197480 O-Ring

44 406580 V-Belt

49 163409 Screw, Hi-Lo Thread

50 404832X004 Belt Keeper

KEY PART

NO. NO. DESCRIPTION

1 425581 Drive Control Assembly

KEY PART

2 406260X460 Cover, Top

NO. NO. DESCRIPTION

3 406262 Pulley

4 425583 Lever, Drive Control

5 406261X460 Cover, Bottom

6 181698 Screw

7 400235X479 Mounting Bracket

9 406258 Cable, Drive

11 406558 Spring, Return

13 419213 Gear Case Assembly

14 193443 Pulley, Drive

15 88348 Washer, Flat

16 407147 Rod, Connecting

17 409616 Spring, Extension

18 418835X004 Spring, Selector

19 189808X428 Knob, Selector Spring

47 67725 Washer, Flat

20 12000022 E-Ring 7/8

21 404838 Bearing Assembly, Support

22 191039 Bearing, Ball

23 161118X004 Retainer, Drive Assembly

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.

HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.374142 (PRODUCT NUMBER 7021RD)

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.

+ 16 hidden pages