Page 1
CARPET LINER CARE AND USE INSTRUCTIONS
Your new Husky 3D® carpet cargo liner is custom molded to fit your vehicle. Upon removal from the box
your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the
floor or in the back of your vehicle with a weight in each corner (a book works well). In a short time, your liner
will remain flat. In colder climates this “relaxing” may take longer; moving the liner to a heated area will
accelerate the process.
Your liner is made from a unique combination of a lightweight thermoplastic foam and a high quality
automotive grade carpet that is extremely tough and durable. To clean your carpet liners, vacuum first to
remove loose debris and then use a damp sponge to spot clean. If you wish to use a commercial cleaner,
cleaners such as Resolve®, Woolite®, Capture®, or similar products are suggested. Read and follow the care
and use instructions provided with these products. Spot removal is most effective when the soiled area is treated
promptly. Do not use solvent-based cleaners or cleaners containing bleach as these may discolor your carpet.
Your 3D® cargo liner comes with a lifetime warranty. For detailed warranty information or to see other
products we have available for your vehicle, please see our web site, http://www.huskyliners.com.
TOP VIEW SHOWING PLACEMENT OF YOUR TAHOE/
YUKON/YUKON DENALI/ESCALADE HUSKY 3D CARPET LINER
TO USE YOUR CARGO LINER IN
VEHICLES EQUIPPED WITH THE
OPTIONAL THIRD SEATS, SIMPLY
TRIM THE MATERIAL AWAY FROM
INSIDE OF THE AREAS SHOWN TO
THE RIGHT CROSSHATCHED.
TRIMMING CAN EASILY BE DONE
WITH A UTILITY KNIFE OR HEAVY
SHEARS. USE THE COMPRESSED
GROOVE SURROUNDING THE
NOTED AREAS AS A GUIDE FOR
TRIMMING. ONCE TRIMMED,
REMOVE YOUR SEATS AND
REINSTALL THE ATOP THE LINER.
YOUR SEAT MOUNTING BRACKETS
WILL PASS THROUGH THE
TRIMMED AREAS IN THE CARGO
LINER ALLOWING ATTACHMENT.
CHECK TO BE SURE THAT THE
SEATS ARE PROPERLY ATTACHED
BEFORE OPERATING VEHICLE.
9201_Insert.doc
02/05/03
Loading...