THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET
CORVETTE FRONT FLOOR LINERS
LEFT OR
DRIVER’S
SIDE
NOTICE: TO ALLOW FULL SEAT TRAVEL, CORVETTE OWNERS WHOSE VEHICLES ARE EQUIPPED WITH
THE SPORT SEAT OPTION WILL NEED TO TRIM THEIR HUSKY LINERS® AS SHOWN ABOVE. TO TRIM,
REMOVE THE OFFSET PORTION OF THE BACK WALL, CUTTING ALONG THE SLOPING RIDGE DEFINING
THE OFFSET. FINISH BY CUTTING ALONG THE INTERSECTION MADE BY THE BACK WALL AND THE
RAISED BAND BORDERING THE PART. REPEAT THIS PROCEDURE FOR THE OPPOSING LINER. A UTILITY
KNIFE OR HEAVY SCISSORS WORKS WELL FOR TRIMMING.
RIGHT OR
PASSENGER’S
SIDE
8910.DOC
Rev: 0
02/01/01
Loading...