Husky Liners 7660 User Manual

7660.doc

11/01/2004

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your

factory floor mats. For correct fit, it is necessary to remove the factory floor mat(s) before installing your new

floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of

Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR THIRD SEAT

NISSAN ARMADA/INFINITI QX-56 FLOOR LINER

FRONT OF VEHICLE

TO INSTALL YOUR LINER JUST RELEASE AND FOLD FORWARD YOUR SECOND ROW OUTER SEATS
(THE CENTER SEAT DOES NOT FOLD FORWARD). ONCE THESE SEATS ARE BOTH FOLDED FORWARD,
YOU CAN INSTALL YOUR LINER. THE SECOND ROW SEATS WILL REATTACH THROUGH THE FOUR (2)
HOLES IN THE LINER. IF YOUR ARMADA/QX56 HAS A CENTER CONSOLE IN THE SECOND ROW OF
SEATS, YOU WILL NEED TO TRIM YOUR LINER AS SHOWN ABOVE (AREA “1”). TRIM FOLLOWING THE
MOLDED IN TRIM GROOVE.

NOTICE: THE FOUR (2) AREAS DARKENED ABOVE SHOULD BE TRIMMED OUT WHEN YOU RECEIVE
YOUR LINER. IF THESE ARE NOT TRIMMED, YOUR SEATS WILL NOT BE ABLE TO LOCK INTO PLACE
AND THE LINER SHOULD NOT BE INSTALLED. IF YOUR LINER IS NOT TRIMMED IN THESE TWO
AREAS, PLEASE CALL US AT 800-344-8759.