Husky Liners 7376 User Manual

7376.doc
11/05/02

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat(s) before installing your

new floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR THIRD SEAT

FORD EXPLORER/MERCURY MOUNTAINEER FLOOR LINER

FRONT OF VEHICLE

TO INSTALL YOUR LINER JUST RELEASE AND FOLD FORWARD YOUR SECOND ROW OUTER SEATS
(THE CENTER SEAT DOES NOT FOLD FORWARD). ONCE THESE SEATS ARE BOTH FOLDED FORWARD,
YOU CAN INSTALL YOUR LINER. THE SECOND ROW SEATS WILL REATTACH THROUGH THE FOUR (4)
HOLES IN THE LINER.

NOTICE: THE FOUR (4) AREAS DARKENED ABOVE SHOULD BE TRIMMED OUT WHEN YOU RECEIVE
YOUR LINER. IF THESE ARE NOT TRIMMED, YOUR SEATS WILL NOT BE ABLE TO LOCK INTO PLACE
AND THE LINER SHOULD NOT BE INSTALLED. IF YOUR LINER IS NOT TRIMMED IN THESE FOUR
AREAS, PLEASE CALL US AT 800-344-8759.