Husky Liners 7355 User Manual

7355.doc
08/28/02

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your

factory floor mats. For correct fit, it is necessary to remove the factory floor mat(s) before installing your new

floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of

Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR THIRD SEAT FORD

EXPEDITION /LINCOLN NAVIGATOR FLOOR LINER

BEFORE INSTALLATION OF YOUR NEW HUSKY LINER YOU MUST FIRST RELEASE AND FOLD YOUR
SECOND SEATS FORWARD. THIS IS DONE USING THE RELEASE LEVERS LOCATED ON THE SIDES OF THE
SEAT. IF YOU HAVE ANY QUESTIONS ABOUT THIS PROCEDURE, PLEASE FOLLOW THE INSTRUCTIONS
PROVIDED IN YOUR OWNERS MANUAL. ONCE THE LINER IS INSTALLED, MAKE CERTAIN THAT THE
SEATS ARE SECURELY LOCKED INTO POSITION BEFORE DRIVING YOUR VEHICLE.

AREAS SHOWN DARKENED ABOVE SHOULD ALREADY
BE TRIMMED WHEN YOU RECEIVE YOUR LINER. THE
HOLES ALLOW THE SECOND SEAT TO LOCK INTO PLACE.
DO NOT INSTALL LINER WITHOUT AREAS TRIMMED.

THIS PART FITS VEHICLES WITH SECOND ROW 40/20/40 BENCH SEATS ONLY, FOR

VEHICLES WITH SECOND ROW BUCKET SEATS USE HUSKY LINER PART #7356.